![Anycubic Kobra S1 Combo Multicolor 3D Printer with Anycubic ACE PRO, 4 Multicolor, Drying and Printing at the Same Time, 600m]({"https://m.media-amazon.com/images/I/714cypsVIhL._AC_SS115_.jpg":[115,115],"https://m.media-amazon.com/images/I/714cypsVIhL._AC_SS230_.jpg":[230,230],"https://m.media-amazon.com/images/I/714cypsVIhL._AC_SS345_.jpg":[345,345]})
![Anycubic Kobra S1 Combo 3D Printer, 4 Stunning Multicolor with Anycubic ACE PRO, 600mm/s High Speed and 320℃ Hotend Free-Clog]({"https://m.media-amazon.com/images/I/71WXGN4vvbL._AC_SS115_.jpg":[115,115],"https://m.media-amazon.com/images/I/71WXGN4vvbL._AC_SS230_.jpg":[230,230],"https://m.media-amazon.com/images/I/71WXGN4vvbL._AC_SS345_.jpg":[345,345]})
![ANYCUBIC Kobra S1 Combo 3D Printer, Drying and Printing at the Same Time, Stunning 4 Color with Anycubic ACE PRO, 600mm/s Ult]({"https://m.media-amazon.com/images/I/41RjUQNyTmL._AC_SS115_.jpg":[115,115],"https://m.media-amazon.com/images/I/41RjUQNyTmL._AC_SS230_.jpg":[230,230],"https://m.media-amazon.com/images/I/41RjUQNyTmL._AC_SS345_.jpg":[345,345]})
Report an issue with this product or seller
I have now done well over 400 prints with the replacement printer and have not had many issues at all. I have had an issue with another hotend but I replaced it and have had no issues since. I have enjoyed it so much that I have gotten into printer more and more things and started making masks and bigger items. I am looking to get a bigger printer, and I am considering going with the Kobra 3 Max Combo because I have been so happy with this printer since the initial issues that I had. Between the customer service and the quality of the replacement printer it may push me over the edge to choose them for the larger printer.
I have worked with customer service and have corrected the issues. They have replaced the printer, and I was able to keep all of the parts that they sent me to try and repair the old printer. I have printed 10 different prints, and they have all came out great. I will update as I print more designs.
I bought this during the Amazon Days and have had nothing but issues with the printer. I had to work at getting it dialed in and finally I had it working and making good prints for a few days. One day I started a print and went to work. My daughter told me when I got home that it made a loud noise. When I looked the entire hot end had slammed into the print bed and broke in half. I got ahold of Anycubic and they sent me a replacement hot end. Of course, they were out so it took over 2 weeks to receive the part. I got it up and running again and it was printing fine. I had just printed two prints and was happy with them. Then I noticed that there was a firmware update. I did the firmware update and then Right after that I got an error that stated that there was an issue with the cable going to from the print head to the motherboard. After putting in a ticket with Anycubic again they sent me another cable. It took almost 2 weeks again and when I finally got the cable, I changed it out and still got the error. I contacted them again and said that this didn't fix it, and they suggested that I roll back the firmware and this should fix it. I have tried to roll back the firmware and all that happens is that the error just stays there on the screen. I am waiting for another response as we speak. I may update this if there is a solution.
Consider these available items
Videos for similar products
Product description
Excellent Printing Performance
3D Printer and 3D Printer Filament Recommended by ANYCUBIC
 Anycubic Kobra S1 |  Anycubic Kobra S1 Combo |  Anycubic Kobra 3 Combo |  Anycubic Kobra 3 MaxCombo |  Anycubic Kobra 3 Camera |  PLA Filament 2KG |  Matte PLA Filament | |
|---|---|---|---|---|---|---|---|
|
Customer Reviews
|
69
|
120
|
119
|
23
|
187
|
6,754
|
286
|
|
Price
| $399.99 | $459.99 | — | $649.99 | $21.99 | $30.99 | $16.99 |
|
Build Volume:
| 9.8'' x 9.8'' x 9.8'' | 9.8'' x 9.8'' x 9.8'' | 9.8'' x 9.8'' x 10.2'' | 16.5'' x 16.5'' x 19.7'' | / | Gray White | Matte Black |
|
Printing Speed:
| ＜600mm/s (Recommended 300) | ＜600mm/s (Recommended 300) | ＜600mm/s (Recommended 300) | ＜600mm/s (Recommended 300) | / | 1.75 ± 0.02mm | 1.75 ± 0.02mm |
|
Multi Color Printing:
| Support Needs ACE Pro | Support | Support | Support | / | / | / |
|
Fully Enclosed:
| Yes | Yes | No | No | / | / | / |
|
Leveling Type:
| Auot Leveling Smart Z-offset | Auot Leveling Smart Z-offset | Auot Leveling Smart Z-offset | Auot Leveling Smart Z-offset | / | / | / |
|
Heat Distortion Temperature
| PLA, PETG, TPU, ABS, ASA, PA | PLA, PETG, ABS, ASA, PA | PLA, PETG, TPU | PLA, PETG, TPU | / | / | / |
Product Videos
From the brand
-
Anycubic is a famous consumer-grade 3D printing manufacturer specializing in delivering quality 3D printing products.
Featuring a professional R&D team and high-end innovation technologies, we could make 3D printing more accessible to meet the demand from 3D professionals and amateurs alike. We are passionate about providing effective 3D printing solutions to unleash your creativity and help you push the limits of what's possible.
-
Anycubic Kobra X
-
Anycubic Kobra X Combo
-
Anycubic Kobra S1 Combo
-
Anycubic Kobra 3 Max Combo
-
Anycubic Kobra 3 V2 Combo
-
ANYCUBIC FDM 3D Printer
-
ANYCUBIC FDM 3D Printer
-
ANYCUBIC Resin LCD 3D Printer
-
ANYCUBIC Resin LCD 3D Printer
-
FDM 3D Printer Hot Accessory
-
NEW!!! Multi Color Silk PLA
-
PLA 3D Printer Filament
-
PLA 3D Printer Filament
-
ANYCUBIC 3D Printer Resin
-
Applied to Many Scenarios
-
Product information
| Product Dimensions | 17.8 x 19.8 x 19 inches |
|---|---|
| Item Weight | 20.2 pounds |
| ASIN | B0CZ76M6ZH |
| Item model number | Anycubic Kobra 3 Combo |
| Customer Reviews |
3.8 out of 5 stars |
| Best Sellers Rank |
|
| Date First Available | March 27, 2024 |
| Manufacturer | ANYCUBIC |
Feedback
Products related to this item
Page 1 of 1Start over
Similar brands on Amazon
Page 1 of 1Start Over
Sponsored
Customers say
Customers find the 3D printer produces great quality prints and is easy to use, with one noting it comes mostly assembled. They appreciate its speed and color options, with one mentioning it's a great way to get started with multi-color 3D printing, and consider it good value for money. The printer has mixed reliability, with some customers reporting no issues while others experience problems. Customers report clogging issues, with the printer clogging about once a week, and adhesion problems where prints don't stick to the bed.
AI Generated from the text of customer reviews
Select to learn more
38 customers mention print quality, 31 positive, 7 negative
good printer , still needs some bugs worked out , needs several adjustment to get a good first print...Read more
Once up and running, this is a interesting printer. However, it had z offset issues. Once I fixed it, runs like a work horse.Read more
good 3D printer with realistic expectationsRead more
Great printer, poor customer service.Read more
24 customers mention ease of use, 21 positive, 3 negative
I’ve had 3D printers for awhile now but this one is amazing. User friendly and the multi color feature is an added bonus....Read more
...It was very easy to put together and runs great I have no complaints. Would definitely buy it again.Read more
Best printer on the market for the money, super easy to use, easy to assemble, great design produces quality prints and noise levels are minimal....Read more
...The Kobra 3 comes mostly assembled....Read more
17 customers mention color options, 12 positive, 5 negative
...This is said to print up to 8 colors but the software and hardware will not be ready for that till toward the end of the year and I plan on buying a...Read more
...Yes, you can use the smaller rolls. Printing multiple colors is nice but can also be expensive because you do end up with a lot of filament poop....Read more
...The color box is also a big issue. It constantly causes clogs even within the box itself. I used only anycubic rfid pla filament in the color box....Read more
...The ACE pro is amazing as well, allowing for easy color changes and lots of interesting add ons to print that help a lot....Read more
14 customers mention value for money, 12 positive, 2 negative
Best printer on the market for the money, super easy to use, easy to assemble, great design produces quality prints and noise levels are minimal....Read more
Its a great cheap starter multicolor. Have had to tinker with it though so just be warned about thatRead more
i like my cubic 3 with the acb it is worth the moneyRead more
...In my honest opinion the Bambi a1 mini is smaller but it’s cheaper and has better quality. I only give it a 2 because of the ACE that comes with it.Read more
13 customers mention speed, 11 positive, 2 negative
...of having different colors available right away, the loader tray, the speed and the app....Read more
...It IS super fast which he does love and it is pretty quiet. So there are some good points to it but some not so great points as well....Read more
...The printer itself is fast. Once I get the hang of the software I think it will be even better.Read more
...It's fast! Just having it print fast with a filament dry container is worth the price alone....Read more
56 customers mention reliability, 23 positive, 33 negative
...replacement just my money back so it looks like a Bambu this has too many issues that should have been address before it hit the marketRead more
The printer works fine, the combo package was missing the filament tubes to connect the ACE unit to the print head....Read more
good printer , still needs some bugs worked out , needs several adjustment to get a good first print...Read more
The printer works perfect! After about 15 hotend replacements! The ACE Pro never worked....Read more
13 customers mention clogging, 0 positive, 13 negative
This Printer constantly clogs and is very unreliable...Read more
...The color box is also a big issue. It constantly causes clogs even within the box itself. I used only anycubic rfid pla filament in the color box....Read more
...Another issue that happened around the same time is that I had a hotend that clogged and was beyond fixing, so I had to purchase a new one, after...Read more
There’s a serious problem with filament clogging with this 3d printer the crazy part is I wasn’t even using four colors for the print I came back...Read more
12 customers mention adhesion, 2 positive, 10 negative
Seemed like a nice printer, started having adhesion issues after about 50 hours, then that was followed by z axis issues....Read more
...Terrible print quality, terrible bed adhesion, terrible software, and when I finally got it working semi decent I woke up to the hot end snapped...Read more
...prints off of it, the only problems I've run into is bed adhesion and clogs, the bed adhesion I solved with special bed adhesion product I've bought...Read more
...rolls of PLA printing only to find a support broke, the print failed to stick to the hot bed, other problems....Read more
Great value for the money!
I've been using this printer over a week now and I love it, it works well and prints everything in great quality and clarity, overall this printer has printed flawlessly, and I've gotten wonderful multicolor prints off of it, the only problems I've run into is bed adhesion and clogs, the bed adhesion I solved with special bed adhesion product I've bought off Amazon, and the clogging has fixed itself, idk if it's a mechanical or firmware issue but on occasion it's said it was clogged and I tap resume and it keeps printing, idk why the clog notification shows up, if the hardware is showing somethings clogging and it's not or what's happening but all I've done is hot resume and it continues luke theirs no problem, other then those 2 issues I've had no other problems with this spitting out wonderful, beautiful prints. This is said to print up to 8 colors but the software and hardware will not be ready for that till toward the end of the year and I plan on buying a second ACE unit to add to my coloring capabilities. Anycubic has shown they have what it takes to compete with the big dogs and I look forward to more innovation from them. Thos printer truly is fantastic and in my opinion seems to work alot better and at a lower cost then it's competitor, the ACE unit works far better then the other comparable unit and the innovation in it sets it apart from that other unit as well as it works as a filament drybox on top of a multimaterial unit. This printer takes multicolor printing to the next level. I would only knock off a half star for my problems, but Amazon don't allow that and I don't want to make this printer look worse then what it really is, I highly recommend this combo if your looking to get into multicolor 3d printing.
Top reviews from the United States
There was a problem filtering reviews. Please reload the page.
- Reviewed in the United States on September 6, 2024
- Reviewed in the United States on December 16, 2025
I purchased the Anycubic Kobra 3 along with the ACE and initially had a positive experience. Print quality was good and setup was straightforward. Unfortunately, after a relatively short period of normal use, the ACE failed completely.
Serious reliability and warranty concerns with the ACE
Reviewed in the United States on December 16, 2025
What makes this especially disappointing is the warranty coverage. The ACE is one of the most frequently used components of the printer—arguably second only to the extruder—yet it carries a 3-month warranty despite costing over $200. This is far below what I would consider reasonable for a critical, high-use component at this price point.
I contacted Anycubic customer support, as I’ve had helpful experiences with them in the past. This time, however, the only solution offered was to purchase another ACE at full price. There was no repair option, extended warranty consideration, or goodwill support despite the nature of the failure. Given the short warranty and the fact that the part already failed once, I don’t see how buying another unit makes sense.
For comparison, I’ve owned printers and components from Creality and Elegoo for over a year without encountering failures like this, and their warranty coverage and post-purchase support have been significantly better in my experience.
This is unfortunate because I genuinely liked Anycubic and wanted to continue using their products. However, between the early failure, extremely limited warranty on an essential component, and the lack of meaningful support, I’ve lost confidence in the long-term reliability of this system. Buyers should carefully consider the ongoing replacement cost and warranty limitations before purchasing.
Images in this review
- Reviewed in the United States on December 5, 2024
Top reviews from other countries
-
Pésimo, en una semana comenzó a filtrarse el filamento por la parte superiorReviewed in Mexico on January 31, 2025
Nefasto
