CRF6, Portable Cleanroom Fogger provides adjustable airflow velocity and fog volume control with up to 2.0 cubic meters fog per minute through two 80mm fog outlets for ≈ 45 minutes, ≈ 213 ml fog density per minute providing 12 to 15 feet visible airflow using dual 80mm fog outlets. The CRF6 is ideal for smoke studies in clean rooms, ISO suites, sterile rooms, RAB, BSC, barrier isolators, glove boxes, etc. Touch pad control is provided, or optional wireless remote control is available to operate CRF6 behind a closed wall, inside a barrier isolator or glove box. No contamination emitted. The fog evaporates back to air we breathe, no clean room wipe down required. The CRF3 is a smaller version with a single 80mm fog outlet producing 0.89 cubic meters pure fog per minute. 

CRF2, Cleanroom Fogger is a low cost fog generator producing 0.26 cubic meters fog per minute through one 60mm fog outlet for ≈ 50 minutes, ≈ 57 ml fog density per minute providing ≈ 6 feet visible fog for smoke studies using deionized, sterilized or WFI water to visualize airflow patterns and turbulence in flow hoods, glove boxes and fume hoods. No contamination emitted, fog evaporates back to air we breathe, no clean room wipe down required. CRF2 Cleanroom Fogger video. 

AP35, LN2 Cleanroom Fogger provides adjustable airflow and high volume, adjustable fog output, ≈ 5.5+ cubic meters fog per minute for ≈ 60 minutes, ≈ 571 ml fog density per minute using dual water heater to provide 20 – 30 feet visible fog with 35 L of LN2 + 5 L of (Deionized, Sterile or WFI) water for smoke studies in clean rooms, ISO suites, sterile rooms and medical rooms. Use touch pad control or optional wireless remote control for fogging behind a closed wall. Since 2001 portable cleanroom foggers have provided ultrapure, breathable fog with no clean room wipe down required. AP35 Ultrapure LN2 Fogger video .

Polystyrene Latex Beads, latex spheres, Microspheres and Particle Size Standards are NIST Traceable, certified particle size standards produced as polystyrene microspheres from 20 nm to 160 µm. Polystyrene Latex Microspheres and polystyrene latex spheres are highly accurate, particle size standards with a narrow size distribution, suspended in a DI Water solution with a trace surfactant to minimize agglomeration. Dry Polystyrene particles also available. Polystyrene latex beads are used to create particle aerosol challenge for size calibration of laser particle counters and to produce Calibration Wafer standards. 

Silica Microspheres are NIST Traceable, silica calibration particle standards provided from 30 nm to 2500 nm. Silica nanoparticles are used in Pharmaceutical applications and used to deposit Contamination Wafer Standards. Silica CV is typical 3% in size distribution. Silica microspheres are diluted with 15ml ethanol or De-Ionized water, based on customer needs. Dry Silica particles are also available from 100 nm to 2500 nm, from 1 gram to 10 Kg per volume. 

Calibration Wafer Standards are certified, NIST traceable, absolute wafer standards deposited with monodisperse, polystyrene latex microspheres at particle diameters of 30 nm to 12 microns. Particle counts deposited are typically between 2000 and 20000 counts on the wafer surface. Spot Depositions can be 1 to 8 particle size peaks deposited around the wafer, depending on the wafer diameter. Calibration Wafer Standards are used to calibrate the size accuracy of scanning surface inspection systems (SSIS), such as Tencor 6200, Tencor 6220, Tencor 6400 and 6420, KLA and Tencor SP1, SP2 and Hitachi wafer inspection tools. 

Silica Contamination Wafer Standard are certified, NIST traceable, contamination wafer standards deposited with monodisperse, silica microspheres at particle diameters of 50 nm to 2500 nm ( 2.5 µm). A Silica Contamination Wafer Standard is typically deposited as a full deposition across the wafer; but can be deposited with up to 8 silica size peaks deposited as spot depositions around the wafer standard. Each silica particle size has a narrow size distribution of 3% or less. Silica Contamination Wafer Standards are provided with a NIST Traceable, Size Certificate and are used to calibrate the size accuracy of scanning surface inspection systems (SSIS) using high powered lasers; such as KLA and Tencor SP2, SP3, SP5, SP5xp, KLA and Hitachi wafer inspection tools. 

AP100, Ultrapure LN2 Fogger is the highest fog volume, adjustable flow fogger, producing ≈ 15.5 cubic meters ultrapure fog per minute, ≈ 90 minutes operation, ≈ 1520 ml fog density per minute using dual water heaters to provide 30 to 40 feet visible fog using 100 L of LN2 + 10 L of (Deionized, Sterile or WFI) water for smoke studies in large clean rooms, or used to produce large volumes of stage and theatric fog fog. Four fog hose outputs are provided for smoke studies in clean rooms, ISO suites, sterile rooms, medical rooms; and ultrapure fog for theatrical stage fog. Use touch pad control and wireless remote control for operation at a distance. No contamination emitted, fog evaporates back to air we breathe, no clean room wipe down required. 

P100 Portable Microbial Air Sampler With its superior functionality and key benefits, the NEW P100 Portable Microbial Air Sampler from Applied Physics is destined to be the industry standard for microbial air sampling. The P100 Microbial Air Sampler offers two CPU controlled sampling rates, 28.3 LPM (1 CFM) and 100 LPM, to allow for continuous monitoring of critical processes, or to take quick cubic meter “grab samples”. 

Portable Backpack Dry Fogger, PBDF-48 is a battery operated, backpack, dry fogger with an 8 liter water cavity, which allows mixing with your preferred, water soluble, disinfectant liquid to disinfect your enclosed areas in a rapid manner. The BackPack Fogger operates at 10-15 micron droplet output, making it the only portable Dryfogger with true portability. The Portable Backpack Dry Fogger, PBDF, provides a remote power on switch on the fog hose, so that you can easily turn power on/off as needed. The PBDF allows your trained staff to quickly sanitize rooms, hallways, entry / exit points with your preferred disinfectant, such as Hypochlorous acid anitizing liquid, mixed with pure water at the concentration that you desire in a total of 8 liters liquid. Typical use of the PBDF-48 is to kill dangerous pathogens such as spores, fungii, molds, coronavirus and yeasts such as Candida Auris, a harmful yeast that invades the lungs, blood and brain. 

The PBF-48 Portable Backpack Fogger is quite capable of sanitizing rooms and offices using an “All Natural” sterilant, which is capable of killing viruses, coronavirus, spores, molds and fungii on contact. It is most often set up with a 15 micron fog output to support agricultural plant and tree leaf applications; or can be set up with 35 micron fog for surface contact killing of critical unwanted bio-organisms in plant life, such as killing a harmful banana fungus in South America called Tropical Race 4, TP4. The PBF-48 and PBF-24 is used with cattle to mitigate Hairy Foot Warts in dairy and beef cattle, improving beef and dairy production. 

The WMF Wall and Table Decontamination Fogger is a truly self-contained unit  capable of sanitizing rooms and offices using an “All Natural” sterilant, which is capable of killing viruses, coronavirus, spores, molds and fungii on contact. It is most often set up with a 15 micron fog output to support a dry fog in office or home environments; or can be set up with 35 micron fog for surface contact killing of critical unwanted bio-organisms. 

The WMF2 Wall and Table Decontamination Fogger is an upgraded AC unit with a more powerful motor. This unit is ideal for heavier and more continuous use. When used with the all natural solution it is capable of killing viruses, coronavirus, spores, molds and fungii on contact. It is most often set up with a 15 micron fog output to support a dry fog in office or warehouse environments; or can be set up with 35 micron fog for surface contact killing of critical unwanted bio-organisms. 

Polystyrene EPS Beads are around 10mm in diameter, about 0.4″, sold by the truckload in plastic bags containing around 50 cubic feet per bag. Puff beads are used to fill furniture Poufs, Beanbags, Throw Pillows, Ottomans and Floor pillows for home/office applications. EPS beads are CFC-free and meet the new RoHS (Restriction of Hazardous Substances).