We design, manufacture and sell unique, innovative tools for ceramic artists.

diamondcoretools Official: TikTok, Instagram, X, Facebook, Threads | Linktree

Shop the NEW Echo Series Carving Tools!

See Full Shop

NEW Products

Check out some of our most popular pottery tools and visit our full website — link below!

The P1 Curved V Tip Carving Tool is a must-have pencil-point carving tool for any ceramic artist’s collection. This pottery tool features DiamondCore® advanced blade technology, so your blade never dulls, and it’s easy to craft clean, crisp lines every time! DESCRIPTION Pencil-point carving tool with “V” tip curved blade Perfect for creating fine, clean, straight, or arced lines 5-inch (139 mm) long hardwood handle Best used on leather-hard clay Adjustable blade angle Does not come with free extra blade; replacement blades available for purchase Wood grain may vary USES/BENEFITS Carving deep or shallow Carving clay (in the “beak down” position) Sgraffito (in the “beak up” position) Mishima, sculpting, scraping, and more Stainless-steel blade never dulls and leaves little to no burrs or debris Carve faster and deeper while the blade resists breaking and rusting Sharp blade increases efficiency and reduces fatigue CAUTIONS Not intended for trimming Use all safety precautions Keep out of the reach of children View this post on Instagram A post shared by @diamondcoretools View this post on Instagram A post shared by @diamondcoretools RELATED PRODUCTS P1X1: P1/X1 Double-Tip Carving Tool P1-2: Choice of replacement carving tool blades FG: Set of 6 extra foam grips, assorted colors FGXL: Egg-shape XL foam grip, fits all pencil tools RELATED SETS DPT 2: A complete Diamond Set of every P series clay carving tool EXPL SET: Our 7-Piece Explorer Set includes the T1, P1, S1, S4, A2, SR and P1-2 PTR SET1: The 6-piece PTR Set 1 includes the P1, P1-2, T1, R4, S4 XL and M3 ST SET: The 3-Piece Starter’s Set — the P1, P2 and P5 — is a great intro to our tools

Material

P1 Curved V Tip Carving Tool

Striped Wood

Sable Wood

The T1 Half Dome Pottery Trimming Tool from DiamondCore® Tools features a blade with a round side and straight corner that allows you to easily transition from curved round to corner cut carving. This half-dome pottery trimming tool is a must-have for ceramic artists who need a reliable tool for carving, shaving, sculpting, and scraping clay. DESCRIPTION 17 mm-wide, half-dome-shaped trimming tool T1 Blade has both a round side and a crisp straight corner The handle tip is paddle-shaped for a bonus smoothing tool 12 mm x 12 mm x 16 cm beautiful, hardwood handle Extremely sharp blade every time you use it Each T1 tool comes with one free spare blade; additional spare blades available for purchase Woodgrain may vary USES/BENEFITS High-performance pottery wheel trimming Shave off thin, rounded ribbons Smooth transition from foot to pot Also great for carving, shaving, sculpting, and scraping Blades are stainless steel and never need sharpening Blades are the same sharpness on both sides, right- or left-handed CAUTIONS Use all safety precautions Keep out of the reach of children View this post on Instagram A post shared by @diamondcoretools View this post on Instagram Ribbons galore! 😍 @ajeceramics is trimming out this pot with our versatile T1 Half Dome Trim Tool. A post shared by @ diamondcoretools on Jul 24, 2020 at 9:46am PDT View this post on Instagram Exhilarating! If you want to put some thrill and excitement back into trimming check out what @juliettedavin is doing with our brand new Trimming Tools. And she’s doing it on our Stickybat so she can trim all the way down the side. A post shared by @ diamondcoretools on Apr 11, 2020 at 11:02am PDT RELATED PRODUCTS S1: The Sticky Pad grips a piece and adds extra stability, making trimming easier S4: This Trimming Spinner stabilizes your piece and helps you make division hash marks RELATED SETS DTT: A complete Diamond Set of every T series trimming tool EXPL SET: The Explorer Set includes the T1, P1, S1, S4, A2, SR and P1-2 PTR SET1: The 6-piece PTR Set 1 includes the P1, P1-2, T1, R4, S4 XL and M3 TKSET2: This 4-Piece Trimming Tool Set 2 includes the T1, T4, a sticky bat and trimming spinner TTSET1: The 5-Piece Trimming Tools Set 1 includes the T1, T2, T3, and T4, one extra blade for each tool, and an XS trimming spinner

Title

T1 Half Dome Pottery Trimming Tool w/ Paddle Handle

Default Title

The R4 Concave Handheld Clay Extruder from DiamondCore® Tools has an angled, stainless-steel blade that leaves clean edges and pulls through clay effortlessly to create a handle shape that is concave in the middle.Now available with the classic, striped wood or with a limited-edition, plum-colored wood handle till sold out. DESCRIPTION Slices through a slab to make a shape that is concave in the middle Angled, stainless-steel blade leaves clean edges and pulls through clay effortlessly 4 3/8-inch (11 cm)-long hardwood handle Great for feet, handles, and more Adjustable-depth ski controls the thickness of the cut The thumb screw allows for easy ski adjustment Max approx. blade width 21 mm X height 14 mm Min approx. blade width 21 mm X height 7 mm Wood grain may vary USES/BENEFITS Make feet for slab-built pieces Ideal for hand-builders and useful for throwers Consistent shape and adjustable thickness So easy to use; avoid all that pulling Works on a variety of clay types Always-sharp stainless-steel blade won’t rust or shatter A variety of basic and intricate shapes are available CAUTIONS Not designed to be used with extremely wet or sticky clay Use all safety precautions Keep out of the reach of children TIP For best results, use these foot and handle-making tools when the clay is not extremely wet or sticky. The clay tool blade should be clean and dry. Ideally, pull the extrusion up and out as it is being formed or fold back the sides of the slab so the extrusion pops up and out. View this post on Instagram A post shared by @diamondcoretools View this post on Instagram A post shared by @diamondcoretools View this post on Instagram A post shared by @diamondcoretools RELATED SETS HCE CLA: Our Classic Shapes handheld clay extruder set: R4, R5 and R6 DRT: A complete Diamond Set of every R series handheld clay extruder PTR SET1: The 6-piece PTR Set 1 includes the P1, P1-2, T1, R4, S4 XL and M3

R4 Concave Handheld Clay Extruder

Plum Wood

Our handy Pottery Trimming Spinner helps stabilize your piece and disperses downward pressure to keep thin-walled pieces from collapsing. The colored lines on the spinner also make convenient division hash marks. It works perfectly in conjunction with our sticky bats and sticky pads too! DESCRIPTION No moving parts Foam rubber backing grips the spinner to a piece being trimmed on a wheel Use one hand for trimming, then place a finger of your other hand in the spinner’s concave center, helping to stabilize the piece String or fishing line looped through the center hole can extend to mark lines on a piece instead of using a laser Trimming Spinner is 48 mm (~2”) in diameter with a 6 mm (1/4") hole in the center. Hashmarks provide five options for equidistant divisions. Trimming Spinner XS is 31 mm (~1.25”) in diameter with a 6 mm (1/4") hole in the center. Hashmarks provide seven options for equidistant division. Trimming Spinner XL is 75 mm (~3”) in diameter with a 6 mm (1/4") hole in the center. Hashmarks provide guides every 10 degrees around, with 10 options for equidistant dividers. USES Makes trimming quicker and easier Colored division lines provide quick reference marking Use in conjunction with our sticky bats and sticky pads BENEFITS Provides a wider area to disperse downward pressure Helps keep thin-walled pieces from collapsing Allows trimming hand to be stabilized on the other hand A rubber grip works better than a bottle cap or credit card Made in the USA CAUTIONS Keep gentle downward pressure while the piece is turning Use all safety precautions Keep out of the reach of children View this post on Instagram A post shared by @diamondcoretools View this post on Instagram A post shared by @diamondcoretools View this post on Instagram A post shared by @diamondcoretools View this post on Instagram A post shared by @diamondcoretools RELATED SETS EXPL SET: Our 7-Piece Explorer Set includes the T1, P1, S1, S4, A2, SR and P1-2 S4 SET: Get all three sizes of pottery trimming spinners

Size

Pottery Trimming Spinners (Sold Individually)

Pottery Trimming Spinner (S4)

XS Pottery Trimming Spinner (S4 XS)

XL Pottery Trimming Spinner (S4 XL)

The 8" Diamond Grinding Discs on 12" Bats last longer and provide better results than silicon carbide abrasives. This set of grinding discs comes with 60 grit, 120 grit and 240 grit grinding discs on 12" bats. DESCRIPTION 8" Diamond Grinding Discs on 12" bat Adhesive-backed metal plate with diamonds fused on Diamond grit has a 7000 hardness rating (silicon carbide abrasive is only rated at 2400 hardness) Rigid plastic bat has both 9" and 10" bat pin spacing 60 grit – coarse – heavy glaze or high-fired clay removal 120 grit – medium – general purpose/pot leveling 240 grit – fine – smoothing USES Permanently attached to a bat for pottery wheel use Remove high-fired glaze drips or high-fired ceramic Level a warped pot Grind tile, stone or glass Level kiln shelf posts and furniture BENEFITS Long lifespan if used properly with water Dust is controlled with water use Lasts longer than silicon carbide Multiple grit sizes available Faster than silicon carbide & sandpaper Better results Less fatigue than other sanding methods CAUTIONS Use all safety precautions Always use safety goggles Be certain that debris does not get into moist, usable clay Carefully clean splash pans to remove all sharp debris Always use with water to maximize tool life & control dust Do not attempt to force grinding Take care to avoid skin removal Keep out of the reach of children RELATED PRODUCTS BAT PIN: Set of 2 bat pins for pottery wheelhead Note: Always use water, high speed and gentle pressure. “Let the diamonds do the work.” Overheating the tool will decrease tool lifespan. View this post on Instagram A post shared by @diamondcoretools View this post on Instagram A post shared by @diamondcoretools View this post on Instagram A post shared by @diamondcoretools

3-Piece 8" Diamond Grinding Disc Set

DiamondCore® Tools offers the unique Shrink Ruler, a flexible, two-sided plastic measuring tool designed for potters to gauge clay shrinkage with four clay shrinkage percentages, making it indispensable for precise projects like teapot lids and cookie jars. The photos show both sides of the same ruler. One side shows 6% and 10%, the other side shows 12% and 14%. HOW TO USE THE SHRINK RULER Using your Shrink Ruler is easy! Here’s a step-by-step guide example: Measure the dimension of the finished piece you want using a standard-inch ruler. Find that measurement on the Shrink Ruler on the scale corresponding to the shrinkage of your clay. Mark or form the wet clay piece to that dimension. When the piece is done firing, it will have shrunk to the correct size. HOW TO MEASURE THE SHRINKAGE RATE OF YOUR CLAY To use the Shrink Ruler, knowing the shrinkage rate of your clay is important. Generally, the clay supplier can provide this, or you can calculate it using the formula below. Make a rectangular clay slab that’s 4” (101.6 mm) X 12” (304.8 mm) and as thick as you plan to make your piece. With a regular ruler, measure and carve a 10” (254 mm) line in the wet clay. Let the clay dry, then bisque fire the clay slab. Fire the slab to final firing conditions. Measure the length of the same line again with the regular ruler. Use the below formula to solve for S. S=(1-F/M)x100 M=length of line in original moist clay slab with a regular ruler (10”) F= length of a line in a finished clay slab (with a regular ruler) S=percentage of shrinkage View this post on Instagram A post shared by @diamondcoretools View this post on Instagram A post shared by @diamondcoretools RELATED SETS: EXPL SET: Our 7-Piece Explorer Set includes the T1, P1, S1, S4, A2, SR and P1-2

Shrink Ruler (Double-Sided, Sold Individually)

Best-Sellers

Current Promos/Discounts

eGift Cards

Email Newsletter Sign-up

Blog

Contact Us

@diamondcoretools

Enjoy 30 days of Hulu for FREE

Claim 10 free meals* from HelloFresh

Get 60% off Sitewide

Sip your way to stronger health with 30% off at ARMRA

Save 10% at Omnilux LED

Save 10% on Ritual Multivitamins Subscriptions

You've scored 50% OFF Factor 🤤

Join now and get 50% off a Club membership

Get your first box FREE with Curology!

Claim your $20 bonus with Acorns

Sign up for Headspace Today and get a 14 day free trial!

Get AAA membership for half the price!

Get 30¢/gal cash back on gas at major stations

Get 15% off at Equip Foods

20% Off the at FabFitFun with code INSIDER20

Get 80% off your first order when signing up to be a VIP!

Get 15% off for cleaner skin at CLEARSTEM

Get your first box FREE with Agency!

50% off + Free Shipping at Purple Carrot!

Power Up with Daily Harvest's High-Protein Smoothies

Save $100 with Gobble

Save 10% on your First Maev Order!

15% off your favorite non-alcoholic spirits at The Zero Proof

10% off JLab’s award‑winning audio gear

Get help with or without insurance. Use code SPACE80 for $80 off.

Start speaking a new language in just 3 weeks

@diamondcoretools

We design, manufacture and sell unique, innovative tools for ceramic artists.

Explore other Linktrees

More from Linktree