FAQs
Pro iCAN Studio
Here is some information regarding the 3D effect inside our products; The bottom line is that all classic ‘cross-feed’ systems produce, with well-recorded music and with a natural rendering of…
Pro iCAN Studio
Main Outputs: <= 2 Ohm Unbalanced & <= 4 Ohm Balanced 3.5mm Outputs: <= 3 Ohm unbalanced & <= 3.4 Ohm Balanced
Pro iCAN StudioPro iDSD Studio
I have an iFi device that is powered by the iPower but might it be possible to use a different power supply that is not dependent on bridge rectifiers (AC…
xDSD Gryphon Pro Pack
Yes you can. Plug the xDSD gryphon into a PC via USB and use the Dual Port setting. This will charge the battery to 3.88v and it will stabilize once…
Pro iDSD Studio
The Pro iDSD Studio can be affected by packet errors the same way any USB device can. It is not, however, affected by noise on the USB power (it does…
Pro iCAN Studio
It uses DC. Also, filament current is designed for 5670 Standard, which is 0.35A @ 6.3V+/-10%. Do not use tubes of other ratings. Also 5670 has a very unique pinout…
Pro iDSD Studio
There is no “headphone amplifier” in the Pro iDSD Studio, just a gain stage/line driver that is sufficiently powerful to drive many headphones directly. However, doing so is understandably not…
Pro iDSD Studio
Question: Does the fixed output bypass the analogue pot completely, and does the tube get used on the DAC’s output stage, or is it for the amp stage only? Answer: Yes…
ZEN One Studio
Please unpair all Bluetooth devices from the iOS device and restart. This will clear the cache and enable connectivity without interference.
ZEN One Studio
With bluetooth firmware version 2.30, we have added the feature to reset bluetooth pairings. Hold down the pairing button on the front of the device for 15 seconds, if done…
xDSD Gryphon Pro Pack
iEMatch is our proprietary tech to reduce hiss from IEMs due to their high sensitivity. The attenuation is up to -12dB.
