WHAT WE DO
The Future of Solar Mounting:
Damage-Free. Leak-Free. Worry-Free.
The Solar Stack Lineup
Simple. Efficient. Cost-Effective.
The smarter way to mount solar. No holes, no leaks, no compromise.
All mounts are made in 8” and 12” lengths. A 12” length mount provides roughly an additional 30% uplift value per mount compared to our 8” mounts. These mounts are primarily used in high wind zones. The engineer of record will spec which mounts should be used.
Our conduit mounts are made in 4” and 8” lengths. The 4” mount is used for conduit mounting only while the 8” version can be used to mount panels. Consult with your engineer of record and design team to ensure the height of the SS-C8 meets your local building code requirements. Some jurisdictions require a minimum distance off the roof for each module.
NEW
CONDUIT MOUNTS
SKUs: SS-C4 • SS-C8
- A simple solution for conduit mounting.
- Conduit piping, such as EMT, RMC, and, PVC, is secured at the top of each mount using conduit straps. These straps can be fastened with T-bolts or self-tapping screws.
- Available in both 4” and 8” lengths.
FLUSH MOUNTS
The Most Popular /
"Go-To" Solar Stack
SKUs: SS-8 • SS-12
- Designed for flush mounted systems.
- Solar modules can be positioned in portrait or landscape orientation.
- Available in both 8” and 12” lengths.
NEW
TILE MOUNTS
SKUs: SS-8 TM • SS-12 TM
- Tile Mounts are 2.5” taller than our Flush Mounts and compatible with any profile tile. Flat, low, medium and high.
- Solar modules can be positioned in portrait or landscape orientation.
- Tile Mounts must be paired with SS-TM End Caps. End Caps create a water tight seal for each mount *
- Solar Stack is only compatible with foam approved underlayments (typically only found in Florida and Hawaii) *
- Available in both 8” and 12” lengths.
5º TILT KITS
Provides 5° Slope
for Solar Panels
SKUs: SS-8 TK5 • SS-12 TK5
- Our tilt kits are designed for modules to be mounted in landscape orientation with mounts connected at the ends of each module.
- Each kit contains a low and high mount.
- Allow 10-12” of inter-row spacing.
- Available in both 8” and 12” lengths.
10º TILT KITS
Provides 10° Slope
for Solar Panels
SKUs: SS-8 TK10 • SS-12 TK10
- Our tilt kits are designed for modules to be mounted in landscape orientation with mounts connected at the ends of each module.
- Each kit contains a low and high mount.
- Allow 12-14” of inter-row spacing.
- Available in both 8” and 12” lengths.
Testimonials
"Installation was smooth and the final look turned out really nice. I'll continue to use Solar Stack and recommend to others without hesitancy."
Buca Forrester
Managing Director – Region Solar
"We're efficient when we use Solar Stack, which is good for us and our client because there are no ballast blocks and wind deflectors."
Jason Sosnovsky
CEO – Pine Energy
"Solar Stack is a game changer! The efficiency and ease of installation of this product is something I did not believe, but was blown away by."
Spencer Swift
Director of Installs – Dawn to Dusk Solar
"SolarStack’s solutions have been a game-changer for me, simplifying the installation process and improving overall productivity."
Tony Ramudo
Chief Development Officer – Urban Solar
"With our facility's strict no-penetration policy, Solar Stack was truly the best and only option for our needs."
Mark Rangel
EVP – Spear Solar Solutions
Our team at Advanced Integrated Solar recently completed a 2.5MW solar installation on a 24/7 manufacturing facility where roof penetrations were absolutely off the table due to the risk of leaks and potential disruption to high-value equipment inside.
Matt Allison
CEO - Advanced Integrated Solar
Our crew had very positive things to say about the ease of installation. Learning the system was quick, and the materials were minimal, which meant less to haul onto the roof
Lew Rosengrant
Project Manager – Solar Mite Solutions
Solar Stack is an innovative solar panel mounting solution that utilizes commercial-grade foam adhesive to secure panels to rooftops, eliminating the need for screws or penetrative fasteners.
Dallin Spriggs
Owner – Zion Electric & Solar
We’ve been working with Solar Stack for about 2–3 years and were one of the earlier adopters in the Mid-Atlantic region. It’s become our default design choice for all applicable roofs on new projects.
Jeff Cheng
Project Manager – Solar Solution DC
Contact Us
"*" indicates required fields
