Paragliding Variometer on Basis of BikePilot2+ or Falk Tiger evo/geo/pro.

AutoRunCE XCSoar	AutoRunCE Main Dialog	AutoRunCE Vario Settings

$BVL 7*	$BVL 9*	$BVL 10*

Build Step 1

build serial variometer and upload firmware


Build informations	./ATMega328P-AU/Readme.md
Firmware with bootloader	./Firmware/SerialVariometer.with_bootloader.hex
Firmware without bootloader	./Firmware/SerialVariometer.hex

Open the BikePilot2+ and Install Serilal Variometer.

Assembly

Prepare the USB stick and insert the device (BikePilot2+).


copy ./Firmware/AutoRunCE.exe into root folder from USB stick
copy ./Firmware/AutoRunCE.ini into root folder from USB stick
copy ./Firmware/XCSoar.exe or www.xcsoar.org/Downloads into XCSoarData folder from USB stick


First NMEA port / GPS signal	XCSoar gets GPS signal from COM0: (Bikepilot internal GPS).
Second NMEA port / pressure	AutoRunCE blocks serial variometer port (COM4 ) and forwards it to XCSoar via UDP broadcast on port 8882, BlueFly protocol should be used here.