Lehigh Valley Mesh ghost, radio tower, regional landmarks, and network paths

Our mission

Lehigh Valley Mesh is a collaborative effort to design and deploy decentralized mesh communication systems throughout the Lehigh Valley. Using open hardware, LoRa-based mesh networks, and amateur radio techniques, we focus on practical, real-world deployments that work when traditional infrastructure does not. Join a growing community of makers, radio operators, and technologists pushing mesh communications forward.

Eastern PA + NJMeshCore / LoRa

MESHCORE / NORTH AMERICA

Start on the same frequency.

For LVMesh companions, repeaters, and room servers, configure the radio with the LVMesh settings shown here. Every radio on the network must use matching RF parameters.

TX POWER IS DEVICE-SPECIFIC AND IS NOT PART OF THIS NETWORK PROFILE.

LVMESH RADIO PROFILENA / 915 MHz ISM
MeshCore radio settings used by LVMesh
ProfileLVMesh primary
Frequency910.525 MHz
Bandwidth500 kHz
Spreading factorSF10
Coding rate4/5
Prefix2-Byte (Required)
REPEATER CLIset radio 910.525,500,10,5
CURRENT LVMESH SETTINGSMESHCORE DOCS ↗

THE NETWORK

Independent communication. Regional reach.

Handheld MeshCore companion radio being used outdoors
01 / 03

Off-grid communication

Communicate without depending on cellular service, commercial internet, or a centralized provider.

Regional LoRa coverage map showing nodes across Pennsylvania, New Jersey, New York, and southern New England
02 / 03

Long-range LoRa

Efficient sub-GHz links make strategically located, low-power infrastructure practical across regional terrain.

Outdoor LVMesh radio enclosure and antenna installed at an elevated shoreline site
03 / 03

Community infrastructure

Repeaters hosted on homes, rooftops, towers, businesses, and elevated sites create useful regional paths.

PACKET PATH / MESHCORE

A message finds its own way.

A companion sends the packet, repeaters relay it, and the destination receives it. Observers listen separately for network telemetry.

LOGICAL NETWORK TOPOLOGYMESSAGE ROUTE / 01
01 / RF RELAY PLANE
CompanionOrigin node
Local repeaterFirst hop
Regional meshAvailable paths
Remote repeaterFinal hop
DestinationMessage received
02 / PASSIVE VISIBILITY PLANE
ObserverListen only
Secure ingressInternet transport
CoreScopeMap + analysis

Visibility is independent of RF message delivery

CORESCOPE / LIVE

Watch the mesh in motion.

Follow live node activity, packet traffic, and observer telemetry across the region.

LIVE CORESCOPE FEED

Live packet activity · summary counters refreshed every 60 seconds

Open full map
Repeaters309
Companions112
Rooms13
Observers24
Packets / 24H32,835

MESHRF / PLANNING + SIMULATION

Model the path before you deploy.

Simulate RF links, viewsheds, coverage, and candidate sites against real terrain before installing hardware.

MeshRF Link Analysis interface showing hardware configuration controls and the regional terrain basemap
CURRENT MESHRF INTERFACELINK ANALYSIS ↗
Coverage unavailable for this selection
HOPREACH / 500 kHz COVERAGE
MARGINALSTRONG
PROFILEUNAVAILABLE
MODEL
INPUT— MATCHING REPEATERS
RENDEREDUNAVAILABLE

No published radio render is available for this selection. Try another frequency or bandwidth.

Updates and LVMesh tools

Checking coverage publication status…

CoreScope live map · HopReach coverage · Observer Management Portal

HOPREACH / REGIONAL COVERAGE

See where the network can reach.

Explore terrain-aware coverage for LVMesh’s primary 500 kHz network and the surrounding 62.5 kHz mesh. Filter the preview by frequency and bandwidth, then open the same selection in HopReach.

MESHMapper / ABE COVERAGE

Map what actually works.

Wardriving pairs phone GPS with a Bluetooth-connected MeshCore companion to record where repeaters are heard, signal strength, and whether a path works both ways.

VERIFYWorking paths
FINDWeak edges + gaps
IMPROVERepeater placement

Field observations let us compare measured coverage with HopReach predictions, prioritize useful repeater sites, and verify improvements after a deployment changes.

DRIVE SAFELY Configure the app before moving and let a passenger operate it. GPS coordinates upload to MeshMapper rather than being broadcast over RF by default.

ABE MeshMapper map showing community-collected coverage observations across the Lehigh Valley COMMUNITY COVERAGEABE · LEHIGH VALLEY

PARTICIPATE

Help us grow the mesh.

River valley, neighborhoods, farmland, wooded ridges, urban rooftops, a water tower, and elevated radio sites
02 / HOST

Offer elevation.

A rooftop, tower, campus, or commercial site can open valuable RF paths.

HOST A NODE / PRIVATE SITE INTAKE

Put your elevation to work.

Tell us about a potential rooftop, tower, campus, or elevated property in Eastern Pennsylvania or New Jersey. Submitting a site does not create an installation commitment.

STEP 1 OF 2

Contact

Lehigh Valley Mesh Discord invitation page
03 / COMMUNITY

Coordinate on Discord.

Plan deployments, troubleshoot radios, and meet operators across the region.

Join Discord