Redis client for Go

go-redis is the official Redis client library for the Go programming language. It offers a straightforward interface for interacting with Redis servers.

In go-redis we are aiming to support the last three releases of Redis. Currently, this means we do support:

• Redis 8.0 - using Redis CE 8.0
• Redis 8.2 - using Redis CE 8.2
• Redis 8.4 - using Redis CE 8.4
• Redis 8.8 - using Redis CE 8.8
• Redis 8.10 - using Redis CE 8.10

Although the go.mod states it requires at minimum go 1.24, our CI is configured to run the tests against all supported versions of Redis and multiple versions of Go (1.24, oldstable, and stable). We observe that some modules related test may not pass with Redis Stack 7.2 and some commands are changed with Redis CE 8.0. Although it is not officially supported, go-redis/v9 should be able to work with any Redis 7.0+. Please do refer to the documentation and the tests if you experience any issues.

Starting with Redis 8.8, go-redis exposes the new array data type via the AR* command family (ARSET, ARGET, ARGETRANGE, ARMSET, ARMGET, ARINSERT, ARDEL, ARDELRANGE, ARLEN, ARCOUNT, ARNEXT, ARSEEK, ARSCAN, ARGREP, ARRING, ARLASTITEMS, ARINFO/ARINFOFULL, and the AROP* reducers). See array_commands.go for the full surface. The API is experimental and may change in a future release.

Learn for free at Redis University

Build faster with the Redis Launchpad

Try the Redis Cloud

Dive in developer tutorials

Join the Redis community

Work at Redis

• Discussions
• Chat
• Reference
• Examples
• Release notes (GitHub Releases)

• English
• 简体中文

• Entra ID (Azure AD)
• Distributed Locks
• Redis Cache
• Rate limiting

• Redis commands except QUIT and SYNC.
• Automatic connection pooling.
• StreamingCredentialsProvider (e.g. entra id, oauth) (experimental)
• Pub/Sub.
• Pipelines and transactions.
• Automatic pipelining (experimental) — batches concurrent commands into pipelines for you; meant for high-throughput / high-load / scale use cases.
• Scripting.
• Redis Sentinel.
• Redis Cluster.
• Client-side caching.
• Redis Performance Monitoring.
• Redis Probabilistic [RedisStack]
• Customizable read and write buffers size.

go-redis supports 2 last Go versions and requires a Go version with modules support. So make sure to initialize a Go module:

go mod init github.com/my/repo

Then install go-redis/v9:

go get github.com/redis/go-redis/v9

import (
    "context"
    "fmt"

    "github.com/redis/go-redis/v9"
)

var ctx = context.Background()

func ExampleClient() {
    rdb := redis.NewClient(&redis.Options{
        Addr:     "localhost:6379",
        Password: "", // no password set
        DB:       0,  // use default DB
    })
    defer rdb.Close()

    err := rdb.Set(ctx, "key", "value", 0).Err()
    if err != nil {
        panic(err)
    }

    val, err := rdb.Get(ctx, "key").Result()
    if err != nil {
        panic(err)
    }
    fmt.Println("key", val)

    val2, err := rdb.Get(ctx, "key2").Result()
    if err == redis.Nil {
        fmt.Println("key2 does not exist")
    } else if err != nil {
        panic(err)
    } else {
        fmt.Println("key2", val2)
    }
    // Output: key value
    // key2 does not exist
}

Connection establishment can be retried by the connection pool when dialing fails.

• DialerRetries: maximum number of dial attempts (default: 5).
• DialerRetryTimeout: default delay between attempts when no custom backoff is provided (default: 100ms).
• DialerRetryBackoff: optional function hook to control the delay between attempts.

Example:

rdb := redis.NewClient(&redis.Options{
	Addr: "localhost:6379",

	DialerRetries:      5,
	DialerRetryTimeout: 100 * time.Millisecond, // used when DialerRetryBackoff is nil

	// Optional: exponential backoff with jitter and a cap.
	DialerRetryBackoff: redis.DialRetryBackoffExponential(100*time.Millisecond, 2*time.Second),
})
defer rdb.Close()

The Redis client supports multiple ways to provide authentication credentials, with a clear priority order. Here are the available options:

The streaming credentials provider allows for dynamic credential updates during the connection lifetime. This is particularly useful for managed identity services and token-based authentication.

type StreamingCredentialsProvider interface {
    Subscribe(listener CredentialsListener) (Credentials, UnsubscribeFunc, error)
}

type CredentialsListener interface {
    OnNext(credentials Credentials)  // Called when credentials are updated
    OnError(err error)              // Called when an error occurs
}

type Credentials interface {
    BasicAuth() (username string, password string)
    RawCredentials() string
}

Example usage:

rdb := redis.NewClient(&redis.Options{
    Addr: "localhost:6379",
    StreamingCredentialsProvider: &MyCredentialsProvider{},
})

Note: The streaming credentials provider can be used with go-redis-entraid to enable Entra ID (formerly Azure AD) authentication. This allows for seamless integration with Azure's managed identity services and token-based authentication.

Example with Entra ID:

import (
    "github.com/redis/go-redis/v9"
    "github.com/redis/go-redis-entraid"
)

// Create an Entra ID credentials provider
provider := entraid.NewDefaultAzureIdentityProvider()

// Configure Redis client with Entra ID authentication
rdb := redis.NewClient(&redis.Options{
    Addr: "your-redis-server.redis.cache.windows.net:6380",
    StreamingCredentialsProvider: provider,
    TLSConfig: &tls.Config{
        MinVersion: tls.VersionTLS12,
    },
})

The context-based provider allows credentials to be determined at the time of each operation, using the context.

rdb := redis.NewClient(&redis.Options{
    Addr: "localhost:6379",
    CredentialsProviderContext: func(ctx context.Context) (string, string, error) {
        // Return username, password, and any error
        return "user", "pass", nil
    },
})

A simple function-based provider that returns static credentials.

rdb := redis.NewClient(&redis.Options{
    Addr: "localhost:6379",
    CredentialsProvider: func() (string, string) {
        // Return username and password
        return "user", "pass"
    },
})

The most basic way to provide credentials is through the Username and Password fields in the options.

rdb := redis.NewClient(&redis.Options{
    Addr:     "localhost:6379",
    Username: "user",
    Password: "pass",
})

The client will use credentials in the following priority order:

1. Streaming Credentials Provider (if set)
2. Context-based Credentials Provider (if set)
3. Regular Credentials Provider (if set)
4. Username/Password fields (if set)

If none of these are set, the client will attempt to connect without authentication.

The client supports both RESP2 and RESP3 protocols. You can specify the protocol version in the options:

rdb := redis.NewClient(&redis.Options{
    Addr:     "localhost:6379",
    Password: "", // no password set
    DB:       0,  // use default DB
    Protocol: 3,  // specify 2 for RESP 2 or 3 for RESP 3
})

go-redis supports server-assisted client-side caching for standalone clients. Eligible read replies are stored in the application's memory, so repeated reads can avoid a Redis round trip. Redis tracks which keys each connection has read and sends RESP3 invalidation notifications when those keys change. go-redis uses those notifications to evict affected entries automatically.

Experimental: The client-side caching API may change in a minor release.

Enable the built-in bounded cache with ClientSideCacheConfig:

rdb := redis.NewClient(&redis.Options{
    Addr:     "localhost:6379",
    Protocol: 3,
    DB:       0,
    ClientSideCacheConfig: &redis.ClientSideCacheConfig{
        MaxEntries: 10_000,
    },
})
defer rdb.Close()

Client-side caching currently requires RESP3, a standalone client, and database 0. Fixed Username and Password values are supported. It is disabled when a dynamic credential provider is configured, because cached data must never be reused after the client's ACL identity changes. Only deterministic read commands supported by the cache are stored; writes and streaming responses bypass it.

While client-side caching is enabled, go-redis rejects SELECT, AUTH, HELLO with arguments, RESET, CLIENT TRACKING, and raw SUBSCRIBE, PSUBSCRIBE, or SSUBSCRIBE commands because they would change connection state that the cache relies on. A guarded command also fails its whole pipeline. The typed Subscribe, PSubscribe, and SSubscribe APIs remain supported because they use dedicated connections.

Invalidations are processed asynchronously. DrainInterval controls how often idle connections are checked for them, while MaxStaleness can provide an optional upper bound on an entry's lifetime. See the client-side caching example for a working demonstration.

go-redis also supports connecting via the redis uri specification. The example below demonstrates how the connection can easily be configured using a string, adhering to this specification.

import (
    "github.com/redis/go-redis/v9"
)

func ExampleClient() *redis.Client {
    url := "redis://user:password@localhost:6379/0?protocol=3"
    opts, err := redis.ParseURL(url)
    if err != nil {
        panic(err)
    }

    return redis.NewClient(opts)
}

import (
    "github.com/redis/go-redis/v9"
    "github.com/redis/go-redis/extra/redisotel/v9"
    "errors"
)

func main() {
    ...
    rdb := redis.NewClient(&redis.Options{...})

    if err := errors.Join(redisotel.InstrumentTracing(rdb), redisotel.InstrumentMetrics(rdb)); err != nil {
        log.Fatal(err)
    }

go-redis uses 32KiB read and write buffers by default for optimal performance. For high-throughput applications or large pipelines, you can customize buffer sizes:

rdb := redis.NewClient(&redis.Options{
    Addr:            "localhost:6379",
    ReadBufferSize:  1024 * 1024, // 1MiB read buffer
    WriteBufferSize: 1024 * 1024, // 1MiB write buffer
})

Experimental — the API may still change. Reach for autopipelining in high-throughput / high-load / scale scenarios; at low concurrency a plain client is simpler and just as fast. A runnable usage tour and throughput comparison live in example/autopipeline.

EXPERIMENTAL: the autopipelining API is subject to change in a future release as we gather feedback — pin your go-redis version if you adopt it.

When many goroutines issue commands concurrently, autopipelining batches them into Redis pipelines automatically — without you writing any pipeline code. It comes in two faces:

• AutoPipeline() — blocking, drop-in. Each command call blocks until it executes and returns its own value/error, exactly like a normal client, so existing code keeps working unchanged. Under concurrency the engine coalesces commands from all goroutines into deep, back-to-back pipelines (a single ordered batch stream by default), reaching several times a plain client's executed commands per second in the same environment — roughly an order of magnitude with a parallel-batch config (MaxConcurrentBatches > 1 with Unordered). Per-goroutine ordering is preserved.
• AsyncAutoPipeline() — deferred, highest throughput. Command calls return immediately; you submit a window of commands and read their results afterward, which keeps each pipeline deep — tens of times a plain client's throughput. Ordered by default. Absolute numbers depend heavily on the machine, network path and server; see autopipeline_bench_README.md for the benchmark methodology and multipliers.

rdb := redis.NewClient(&redis.Options{Addr: "localhost:6379"})
defer rdb.Close()
ctx := context.Background()

// Blocking face: drop-in for a normal client, batched under the hood.
ap, err := rdb.AutoPipeline()
if err != nil { // invalid AutoPipelineOptions, or the client is closed
    log.Fatal(err)
}
defer ap.Close()

var wg sync.WaitGroup
for i := 0; i < 1000; i++ {
    wg.Add(1)
    go func(i int) {
        defer wg.Done()
        key := fmt.Sprintf("key:%d", i)
        if err := ap.Set(ctx, key, i, 0).Err(); err != nil { // blocks until executed
            log.Printf("set %s: %v", key, err)
        }
    }(i)
}
wg.Wait()

For maximum throughput, submit a window on the async face and read later:

ctx := context.Background()
ap, err := rdb.AsyncAutoPipeline() // ordered by default
if err != nil {
    log.Fatal(err)
}
defer ap.Close()

cmds := make([]*redis.StatusCmd, 0, 200)
for i := 0; i < 200; i++ {
    cmds = append(cmds, ap.Set(ctx, fmt.Sprintf("key:%d", i), i, 0)) // returns immediately
}
for _, cmd := range cmds {
    if err := cmd.Err(); err != nil { // blocks until executed
        log.Printf("set: %v", err)
    }
}

Each face has a no-argument form that uses Options.AutoPipelineOptions (or the built-in default) and a WithOptions form that takes an explicit *AutoPipelineOptions; both return (*AutoPipeliner, error) — the error is non-nil for an invalid config or a closed client (e.g. ap, err := rdb.AsyncAutoPipelineWithOptions(&redis.AutoPipelineOptions{MaxConcurrentBatches: 8, Unordered: true})); a handful of parallel batches saturates the link — more permits only add overlapping batches without deepening them. They work on ClusterClient too: commands are routed to the correct shard per key, so a single batch may span many slots; ordering across nodes is per key (same-key commands stay in order, different nodes' sub-pipelines run concurrently). Because batches share a few pipeline connections, autopipelining also needs far fewer connections than a plain client at the same concurrency (see PipelinePoolSize). Autopipelining is only a win under concurrency (or windowed submission) — a single goroutine issuing one blocking command at a time sees little benefit, and a hand-written Pipeline() is still fastest when you can batch by hand.

Caveats: a command's context is not honored once it is queued (batches execute on the autopipeliner's own context) — use a plain client for per-command deadlines. Blocking commands (BLPOP, WAIT, ...) are never batched and run directly on your context — as are SHUTDOWN and MONITOR, which would poison a shared pipeline connection — and Do also bypasses batching with plain Client.Do semantics — prefer the typed methods (ap.Set, ap.Get, ...). On a dropped connection a batch is retried whole (up to MaxRetries), so non-idempotent commands may execute twice. Both faces return a cached, client-shared instance: the first call's config wins and Close stops it for all callers. Hooks may read command results (the engine hands a hook running on the dispatch goroutine the same view a plain pipeline hook gets), but a hook must never issue a command on the same autopipeliner and wait for it — the nested command needs the very dispatch slot the hook is holding, and the engine only recovers by failing that flush after its 30s permit backstops. Options.Limiter is consulted once per batch dispatch (as with a manual pipeline), not once per command. An autopipeliner created on a WithTimeout/WithReadTimeout clone is not stopped by the parent's Close — close it explicitly.

go-redis supports extending the client identification phase to allow projects to send their own custom client identification.

By default, go-redis automatically sends the client library name and version during the connection process. This feature is available in redis-server as of version 7.2. As a result, the command is "fire and forget", meaning it should fail silently, in the case that the redis server does not support this feature.

When connection identity verification is not required or needs to be explicitly disabled, a DisableIdentity configuration option exists. Initially there was a typo and the option was named DisableIndentity instead of DisableIdentity. The misspelled option is marked as Deprecated and will be removed in V10 of this library. Although both options will work at the moment, the correct option is DisableIdentity. The deprecated option will be removed in V10 of this library, so please use the correct option name to avoid any issues.

To disable verification, set the DisableIdentity option to true in the Redis client options:

rdb := redis.NewClient(&redis.Options{
    Addr:            "localhost:6379",
    Password:        "",
    DB:              0,
    DisableIdentity: true, // Disable set-info on connect
})

As of v9.20, FT.SEARCH, FT.AGGREGATE, FT.INFO, FT.SPELLCHECK, and FT.SYNDUMP parse RESP3 (map) responses into the same typed result objects as RESP2. No flag is required — Val() / Result() work uniformly on both protocols.

The legacy UnstableResp3 option is now a no-op and is retained on every options struct only for backwards compatibility. It will be removed in a future release; new code should not set it.

RawResult() / RawVal() continue to work for callers that prefer the raw RESP payload directly:

res1, err := client.FTSearchWithArgs(ctx, "txt", "foo bar", &redis.FTSearchOptions{}).RawResult()
val1 := client.FTSearchWithArgs(ctx, "txt", "foo bar", &redis.FTSearchOptions{}).RawVal()

In the Redis-Search module, the default dialect is 2. If needed, you can explicitly specify a different dialect using the appropriate configuration in your queries.

Important: Be aware that the query dialect may impact the results returned. If needed, you can revert to a different dialect version by passing the desired dialect in the arguments of the command you want to execute. For example:

	res2, err := rdb.FTSearchWithArgs(ctx,
		"idx:bicycle",
		"@pickup_zone:[CONTAINS $bike]",
		&redis.FTSearchOptions{
			Params: map[string]interface{}{
				"bike": "POINT(-0.1278 51.5074)",
			},
			DialectVersion: 3,
		},
	).Result()

You can find further details in the query dialect documentation.

Prior to v9.12, the buffer size was the default go value of 4096 bytes. Starting from v9.12, go-redis uses 32KiB read and write buffers by default for optimal performance. For high-throughput applications or large pipelines, you can customize buffer sizes:

rdb := redis.NewClient(&redis.Options{
    Addr:            "localhost:6379",
    ReadBufferSize:  1024 * 1024, // 1MiB read buffer
    WriteBufferSize: 1024 * 1024, // 1MiB write buffer
})

Important: If you experience any issues with the default buffer sizes, please try setting them to the go default of 4096 bytes.

We welcome contributions to the go-redis library! If you have a bug fix, feature request, or improvement, please open an issue or pull request on GitHub. We appreciate your help in making go-redis better for everyone. If you are interested in contributing to the go-redis library, please check out our contributing guidelines for more information on how to get started.

Some corner cases:

// SET key value EX 10 NX
set, err := rdb.SetNX(ctx, "key", "value", 10*time.Second).Result()

// SET key value keepttl NX
set, err := rdb.SetNX(ctx, "key", "value", redis.KeepTTL).Result()

// SORT list LIMIT 0 2 ASC
vals, err := rdb.Sort(ctx, "list", &redis.Sort{Offset: 0, Count: 2, Order: "ASC"}).Result()

// ZRANGEBYSCORE zset -inf +inf WITHSCORES LIMIT 0 2
vals, err := rdb.ZRangeByScoreWithScores(ctx, "zset", &redis.ZRangeBy{
    Min: "-inf",
    Max: "+inf",
    Offset: 0,
    Count: 2,
}).Result()

// ZINTERSTORE out 2 zset1 zset2 WEIGHTS 2 3 AGGREGATE SUM
vals, err := rdb.ZInterStore(ctx, "out", &redis.ZStore{
    Keys: []string{"zset1", "zset2"},
    Weights: []int64{2, 3}
}).Result()

// EVAL "return {KEYS[1],ARGV[1]}" 1 "key" "hello"
vals, err := rdb.Eval(ctx, "return {KEYS[1],ARGV[1]}", []string{"key"}, "hello").Result()

// custom command
res, err := rdb.Do(ctx, "set", "key", "value").Result()

Do sends the command verbatim on whichever pooled connection happens to be free. For keyspace commands that is all you need. It is the wrong tool for any command that alters connection session state — SELECT, CLIENT SETNAME, CLIENT TRACKING, RESET, HIMPORT PREPARE/DISCARD, and similar: the state lands on (or is wiped from) a single arbitrary connection, later commands are served by other connections that don't share it, and the affected connection eventually returns to the pool and serves unrelated callers. The result is nondeterministic behavior that typed APIs manage for you — for example, the typed HImport* methods keep a client-side registry and replay fieldsets onto every connection that needs them, while a raw Do(ctx, "himport", "prepare", ...) bypasses that entirely, with no replay, recovery, or discard propagation.

For session-scoped work without a typed API, hold a dedicated connection (client.Conn()) for its whole lifetime and close it afterwards.

go-redis provides typed error checking functions for common Redis errors:

// Cluster and replication errors
redis.IsLoadingError(err)        // Redis is loading the dataset
redis.IsReadOnlyError(err)       // Write to read-only replica
redis.IsClusterDownError(err)    // Cluster is down
redis.IsTryAgainError(err)       // Command should be retried
redis.IsMasterDownError(err)     // Master is down
redis.IsMovedError(err)          // Returns (address, true) if key moved
redis.IsAskError(err)            // Returns (address, true) if key being migrated

// Connection and resource errors
redis.IsMaxClientsError(err)     // Maximum clients reached
redis.IsAuthError(err)           // Authentication failed (NOAUTH, WRONGPASS, unauthenticated)
redis.IsPermissionError(err)     // Permission denied (NOPERM)
redis.IsOOMError(err)            // Out of memory (OOM)

// Transaction errors
redis.IsExecAbortError(err)      // Transaction aborted (EXECABORT)

When wrapping errors in hooks, use custom error types with Unwrap() method (preferred) or fmt.Errorf with %w. Always call cmd.SetErr() to preserve error type information:

// Custom error type (preferred)
type AppError struct {
    Code      string
    RequestID string
    Err       error
}

func (e *AppError) Error() string {
    return fmt.Sprintf("[%s] request_id=%s: %v", e.Code, e.RequestID, e.Err)
}

func (e *AppError) Unwrap() error {
    return e.Err
}

// Hook implementation
func (h MyHook) ProcessHook(next redis.ProcessHook) redis.ProcessHook {
    return func(ctx context.Context, cmd redis.Cmder) error {
        err := next(ctx, cmd)
        if err != nil {
            // Wrap with custom error type
            wrappedErr := &AppError{
                Code:      "REDIS_ERROR",
                RequestID: getRequestID(ctx),
                Err:       err,
            }
            cmd.SetErr(wrappedErr)
            return wrappedErr  // Return wrapped error to preserve it
        }
        return nil
    }
}

// Typed error detection works through wrappers
if redis.IsLoadingError(err) {
    // Retry logic
}

// Extract custom error if needed
var appErr *AppError
if errors.As(err, &appErr) {
    log.Printf("Request: %s", appErr.RequestID)
}

Alternatively, use fmt.Errorf with %w:

wrappedErr := fmt.Errorf("context: %w", err)
cmd.SetErr(wrappedErr)

For pipeline operations, use ProcessPipelineHook:

type PipelineLoggingHook struct{}

func (h PipelineLoggingHook) DialHook(next redis.DialHook) redis.DialHook {
    return next
}

func (h PipelineLoggingHook) ProcessHook(next redis.ProcessHook) redis.ProcessHook {
    return next
}

func (h PipelineLoggingHook) ProcessPipelineHook(next redis.ProcessPipelineHook) redis.ProcessPipelineHook {
    return func(ctx context.Context, cmds []redis.Cmder) error {
        start := time.Now()

        // Execute the pipeline
        err := next(ctx, cmds)

        duration := time.Since(start)
        log.Printf("Pipeline executed %d commands in %v", len(cmds), duration)

        // Process individual command errors
        // Note: Individual command errors are already set on each cmd by the pipeline execution
        for _, cmd := range cmds {
            if cmdErr := cmd.Err(); cmdErr != nil {
                // Check for specific error types using typed error functions
                if redis.IsAuthError(cmdErr) {
                    log.Printf("Auth error in pipeline command %s: %v", cmd.Name(), cmdErr)
                } else if redis.IsPermissionError(cmdErr) {
                    log.Printf("Permission error in pipeline command %s: %v", cmd.Name(), cmdErr)
                }

                // Optionally wrap individual command errors to add context
                // The wrapped error preserves type information through errors.As()
                wrappedErr := fmt.Errorf("pipeline cmd %s failed: %w", cmd.Name(), cmdErr)
                cmd.SetErr(wrappedErr)
            }
        }

        // Return the pipeline-level error (connection errors, etc.)
        // You can wrap it if needed, or return it as-is
        return err
    }
}

// Register the hook
rdb.AddHook(PipelineLoggingHook{})

// Use pipeline - errors are still properly typed
pipe := rdb.Pipeline()
pipe.Set(ctx, "key1", "value1", 0)
pipe.Get(ctx, "key2")
_, err := pipe.Exec(ctx)

Recommended to use Docker, just need to run:

make test

• Golang ORM for PostgreSQL, MySQL, MSSQL, and SQLite
• Golang PostgreSQL
• Golang HTTP router
• Golang ClickHouse ORM

The go-redis project was originally initiated by ⭐ uptrace/uptrace. Uptrace is an open-source APM tool that supports distributed tracing, metrics, and logs. You can use it to monitor applications and set up automatic alerts to receive notifications via email, Slack, Telegram, and others.

See OpenTelemetry example which demonstrates how you can use Uptrace to monitor go-redis.

Thanks to all the people who already contributed!