QuantAQ changelog quant-aq.com

MODULAIR

🚀 Features

• New Heatmap Figure for X-series Devices. We have introduced a new heatmap figure on all X-series device pages that allows you to view historical, hourly data as well as uptime by pollutant.
• X-Series View. When viewing data for an X-series device, time zone changes are now applied immediately to the plotted data.

🐛 Bug Fixes

None reported in this release.

🔒 Security Updates

• Third-Party Libraries. This release includes several behind-the-scenes security updates associated with third-party libraries.

MODULAIR-X

🚀 Features

• LiPo Charging Rate. The maximum charging rate for the internal LiPo battery has been reduced to avoid a large power draw after long outages.

🐛 Bug Fixes

• Cold weather LiPo Behavior. We have rewritten logic around charging and discharging the internal LiPo battery during very cold (< -20ºC) temperatures.
• Debouncing Power Dips. Previously, if power was lost momentarily (< 5s), such as during a voltage drop, the device could enter its 'safe shutdown' sequence and require a manual power cycle to turn back on. Now, there is a 5-second debounce that prevents momentary loss of power from turning off the device.
• CPC Data Cleanliness. We added further QC checks and improved sub-1minute averaging to remove occasional inconsistencies with some data, mostly temperature, pressure, and humidity data.

QuantAQ Cloud

🚀 Features

• Organization and Networks. You now show up at the top of the list for Network and Organization member lists.

🐛 Bug Fixes

• ARISense Data Downloads. There was a bug with the rh_manifold column in raw data downloads that has been fixed.

🔒 Security Updates

• Third-Party Libraries. This release includes several behind-the-scenes security updates associated with third-party libraries.

QuantAQ Cloud

🚀 Features

None reported in this release.

🐛 Bug Fixes

None in this release.

🔒 Security Updates

• Third-Party Libraries. This release includes several behind-the-scenes security updates associated with third-party libraries.

QuantAQ Cloud

🚀 Features

None reported in this release.

🐛 Bug Fixes

• Edit User Page. We deleted unused portions of the page that will not impact users.

🔒 Security Updates

• Third-Party Libraries. This release includes several behind-the-scenes security updates associated with third-party libraries.

QuantAQ Cloud

🚀 Features

• Smart Solar Power System. A few changes were made to improve the look and feel of solar data plots. Specifically, periods without data are now missing, as opposed to being interpolated, and there is a new temperature plot. Small changes to the general look and feel of the figures were also implemented.

🐛 Bug Fixes

None reported in this release.

🔒 Security Updates

None reported in this release.

QuantAQ Cloud

🚀 Features

None in this release.

🐛 Bug Fixes

• Flag column in raw data downloads. The raw data downloads were missing the flag column. This has been fixed.
• Inability to access some historical data on the map. Devices that had invalid weather station data were occasionally unable to load historical data in the map view. This has been fixed.

🔒 Security Updates

None in this release.

QuantAQ Cloud

🚀 Features

• API Rate Limiting. We have deployed API rate limiting for data-heavy endpoints. The initial limit is 150 requests/minute. Please refer to the API docs for notes.

🐛 Bug Fixes

None in this release.

🔒 Security Updates

None in this release.

QuantAQ Cloud

🚀 Features

• None reported in this release.

🐛 Bug Fixes

• WiFi Configuration. We fixed a bug with the WiFi configuration tool that prevented MODULAIR-X series devices from being set properly.

🔒 Security Updates

• Third-Party libraries. This release includes several behind-the-scenes security updates associated with third-party libraries.

QuantAQ Cloud

🚀 Features

• Weather Stations. Users can now select whether or not a weather station is installed for a specific device. Users can also select the weather station model where applicable. More information here.
• Smart Solar Power System. If you have a MODULAIR-X-series device connected to a Smart Solar Power System, you can select this within the device settings.
• Device Vitals. We've introduced a new Device Health Card for MODULAIR-X-series devices.
• Network and Organization Invites. If you are invited to join an Organization or Network, you will receive a notification by email in addition to in-app.

🐛 Bug Fixes

• API Timestamp Formatting. Previously, errors would be returned when users input improperly-formatted timestamps (e.g., inf). Now, a proper 400-series error will be returned.

🔒 Security Updates

• Third-Party libraries. This release includes several behind-the-scenes security updates associated with third-party libraries.