Father, author, developer, maker. Please consider sponsoring my work.

Bring back MiniDV with this Raspberry Pi FireWire HAT


In my last post, I showed you to use FireWire on a Raspberry Pi with a PCI Express IEEE 1394 adapter. Now I'll show you how I'm using a new FireWire HAT and a PiSugar3 Plus battery to make a portable MRU, or 'Memory Recording Unit', to replace tape in older FireWire/i.Link/DV cameras.

Firehat on Raspberry Pi recording video from Canon GL1 over FireWire

The alternative is an old used MRU like Sony's HVR-MRC1, which runs around $300 on eBay1.

Read more ⟶

Using FireWire on a Raspberry Pi


After learning Apple killed off FireWire (IEEE 1394) support in macOS 26 Tahoe, I started looking at alternatives for old FireWire equipment like hard drives, DV cameras, and A/V gear.

Power Mac G4 MDD with Canon GL1 DV Camera importing footage into Final Cut Express

I own an old Canon GL1 camera, with a 'DV' port. I could plug that into an old Mac (like the dual G4 MDD above) with FireWire—or even a modern Mac running macOS < 26, with some dongles—and transfer digital video footage between the camera and an application like Final Cut Pro.

Read more ⟶

The best laptop Apple ever made


Today I posted a video titled The best laptop Apple ever made, and tl;dw1 it's the 11" MacBook Air.

I acknowledge in the video my pick is slightly subjective, and I also asked a number of other YouTubers which Mac laptop they consider the best (or at least most influential). If you don't want to watch the video, I'll summarize their choices here:

Read more ⟶

Restoring an Xserve G5: When Apple built real servers


Recently I came into posession of a few Apple Xserves. The one in question today is an Xserve G5, RackMac3,1, which was built when Apple at the top—and bottom—of it's PowerPC era.

Xserve G5 on Jeff's desk

This isn't the first Xserve—that honor belongs to the G41. And it wasn't the last—there were a few generations of Intel Xeon-powered RackMacs that followed. But in my opinion, it was the most interesting.

Unfortunately, being manufactured in 2004, this Mac's Delta power supply suffers from the Capacitor Plague. The PSU tends to run hot, and some of the capacitors weren't even 105°C-rated, so they tend to wear out, especially if the Xserve was running high-end workloads.

Read more ⟶

Can the MacBook Neo replace my M4 Air?


Many of us wonder if the MacBook Neo is 'the one'.

MacBook Neo on top of a Mac Pro side panel

Because I have a faster desktop (currently a M4 Max Mac Studio), I've always used a lower-end Mac laptop, like the iBook or MacBook Air, for travel. I've used MacBook Pros in the past, but I like the portability of smaller, cheaper models.

In fact, my favorite Mac laptop ever was the 11" Air.

Read more ⟶

A PTP Wall Clock is impractical and a little too precise


After seeing Oliver Ettlin's 39C3 presentation Excuse me, what precise time is It?, I wanted to replicate the PTP (Precision Time Protocol) clock he used live to demonstrate PTP clock sync:

Oliver Ettlin with PTP wallclock at 39C3

I pinged him on LinkedIn inquiring about the build (I wasn't the only one!), and shortly thereafter, he published Gemini2350/ptp-wallclock, a repository with rough instructions for the build, and his C++ application to display PTP time (if available on the network) on a set of two LED matrix displays, using a Raspberry Pi.

Read more ⟶