The
project I am working now is a little bit out of my “comfort zone” so it takes more time than my previous projects to build and assemble
the different parts.
First,
I built one of the walls but in the end, I found out that the door
was far too big for 1/12 scale so I started again.
The
second difficulty comes from the curved walls on each side. The
material I used was too thick and didn’t bend easily so I had to
start again in a thinner version. Now I am working on the cornices.
Straight cornices are not too difficult to do but curved ones are
harder to do.
The
next step will be the roof.
My
friend Alison will soon start designing the sculpted elements and
make molds to duplicate them.
Here
are a few pictures of the first prototype:
