Plotly.NET
Chart Type
Static members
| Static member |
Description
|
Full Usage:
Chart.Cone(xyzuvw, ?Name, ?ShowLegend, ?Opacity, ?Text, ?MultiText, ?ColorScale, ?ShowScale, ?ColorBar, ?SizeMode, ?ConeAnchor, ?CameraProjectionType, ?Camera, ?UseDefaults)
Parameters:
('a * 'b * 'c * 'd * 'e * 'f) seq
-
Sets the x, y, and z coordinates of the vector field and of the displayed cones together with the x, y, and z components of the vector field.
?Name : string
-
Sets the trace name. The trace name appear as the legend item and on hover
?ShowLegend : bool
-
Determines whether or not an item corresponding to this trace is shown in the legend.
?Opacity : float
-
Sets the opactity of the trace
?Text : 'g
-
Sets a text associated with each datum
?MultiText : 'g seq
-
Sets individual text for each datum
?ColorScale : Colorscale
-
Sets the colorscale
?ShowScale : bool
-
Whether or not to show the colorbar/colorscale
?ColorBar : ColorBar
-
Sets the colorbar
?SizeMode : ConeSizeMode
-
Determines whether `sizeref` is set as a "scaled" (i.e unitless) scalar (normalized by the max u/v/w norm in the vector field) or as "absolute" value (in the same units as the vector field).
?ConeAnchor : ConeAnchor
-
Sets the cones' anchor with respect to their x/y/z positions. Note that "cm" denote the cone's center of mass which corresponds to 1/4 from the tail to tip.
?CameraProjectionType : CameraProjectionType
-
Sets the camera projection type of this trace.
?Camera : Camera
-
Sets the camera of this trace.
?UseDefaults : bool
-
If set to false, ignore the global default settings set in `Defaults`
Returns: GenericChart
Type parameters: 'a, 'b, 'c, 'd, 'e, 'f, 'g (requires :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible) |
Creates a cone plot, typically used to visualize vector fields. Specify a vector field using 6 1D arrays: 3 position arrays `x`, `y` and `z` and 3 vector component arrays `u`, `v`, `w`. The cones are drawn exactly at the positions given by `x`, `y` and `z`.
|
Full Usage:
Chart.Cone(coneXYZ, coneUVW, ?Name, ?ShowLegend, ?Opacity, ?Text, ?MultiText, ?ColorScale, ?ShowScale, ?ColorBar, ?SizeMode, ?ConeAnchor, ?CameraProjectionType, ?Camera, ?UseDefaults)
Parameters:
('a * 'b * 'c) seq
-
Sets the x, y, and z coordinates of the vector field and of the displayed cones.
coneUVW : ('d * 'e * 'f) seq
-
Sets the x, y, and z components of the vector field.
?Name : string
-
Sets the trace name. The trace name appear as the legend item and on hover
?ShowLegend : bool
-
Determines whether or not an item corresponding to this trace is shown in the legend.
?Opacity : float
-
Sets the opactity of the trace
?Text : 'g
-
Sets a text associated with each datum
?MultiText : 'g seq
-
Sets individual text for each datum
?ColorScale : Colorscale
-
Sets the colorscale
?ShowScale : bool
-
Whether or not to show the colorbar/colorscale
?ColorBar : ColorBar
-
Sets the colorbar
?SizeMode : ConeSizeMode
-
Determines whether `sizeref` is set as a "scaled" (i.e unitless) scalar (normalized by the max u/v/w norm in the vector field) or as "absolute" value (in the same units as the vector field).
?ConeAnchor : ConeAnchor
-
Sets the cones' anchor with respect to their x/y/z positions. Note that "cm" denote the cone's center of mass which corresponds to 1/4 from the tail to tip.
?CameraProjectionType : CameraProjectionType
-
Sets the camera projection type of this trace.
?Camera : Camera
-
Sets the camera of this trace.
?UseDefaults : bool
-
If set to false, ignore the global default settings set in `Defaults`
Returns: GenericChart
Type parameters: 'a, 'b, 'c, 'd, 'e, 'f, 'g (requires :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible) |
Creates a cone plot, typically used to visualize vector fields. Specify a vector field using 6 1D arrays: 3 position arrays `x`, `y` and `z` and 3 vector component arrays `u`, `v`, `w`. The cones are drawn exactly at the positions given by `x`, `y` and `z`.
|
Full Usage:
Chart.Cone(xEncoded, yEncoded, zEncoded, uEncoded, vEncoded, wEncoded, ?Name, ?ShowLegend, ?Opacity, ?Text, ?MultiText, ?ColorScale, ?ShowScale, ?ColorBar, ?SizeMode, ?ConeAnchor, ?CameraProjectionType, ?Camera, ?UseDefaults)
Parameters:
EncodedTypedArray
yEncoded : EncodedTypedArray
zEncoded : EncodedTypedArray
uEncoded : EncodedTypedArray
vEncoded : EncodedTypedArray
wEncoded : EncodedTypedArray
?Name : string
?ShowLegend : bool
?Opacity : float
?Text : 'a
?MultiText : 'a seq
?ColorScale : Colorscale
?ShowScale : bool
?ColorBar : ColorBar
?SizeMode : ConeSizeMode
?ConeAnchor : ConeAnchor
?CameraProjectionType : CameraProjectionType
?Camera : Camera
?UseDefaults : bool
Returns: GenericChart
Type parameters: 'a (requires :> System.IConvertible) |
Creates a cone plot from encoded vector-field coordinates and components.
|
Full Usage:
Chart.Cone(x, y, z, u, v, w, ?Name, ?ShowLegend, ?Opacity, ?Text, ?MultiText, ?ColorScale, ?ShowScale, ?ColorBar, ?SizeMode, ?ConeAnchor, ?CameraProjectionType, ?Camera, ?UseDefaults)
Parameters:
'a seq
-
Sets the x coordinates of the vector field and of the displayed cones.
y : 'b seq
-
Sets the y coordinates of the vector field and of the displayed cones.
z : 'c seq
-
Sets the z coordinates of the vector field and of the displayed cones.
u : 'd seq
-
Sets the x components of the vector field.
v : 'e seq
-
Sets the y components of the vector field.
w : 'f seq
-
Sets the z components of the vector field.
?Name : string
-
Sets the trace name. The trace name appear as the legend item and on hover
?ShowLegend : bool
-
Determines whether or not an item corresponding to this trace is shown in the legend.
?Opacity : float
-
Sets the opactity of the trace
?Text : 'g
-
Sets a text associated with each datum
?MultiText : 'g seq
-
Sets individual text for each datum
?ColorScale : Colorscale
-
Sets the colorscale
?ShowScale : bool
-
Whether or not to show the colorbar/colorscale
?ColorBar : ColorBar
-
Sets the colorbar
?SizeMode : ConeSizeMode
-
Determines whether `sizeref` is set as a "scaled" (i.e unitless) scalar (normalized by the max u/v/w norm in the vector field) or as "absolute" value (in the same units as the vector field).
?ConeAnchor : ConeAnchor
-
Sets the cones' anchor with respect to their x/y/z positions. Note that "cm" denote the cone's center of mass which corresponds to 1/4 from the tail to tip.
?CameraProjectionType : CameraProjectionType
-
Sets the camera projection type of this trace.
?Camera : Camera
-
Sets the camera of this trace.
?UseDefaults : bool
-
If set to false, ignore the global default settings set in `Defaults`
Returns: GenericChart
Type parameters: 'a, 'b, 'c, 'd, 'e, 'f, 'g (requires :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible) |
Creates a cone plot, typically used to visualize vector fields. Specify a vector field using 6 1D arrays: 3 position arrays `x`, `y` and `z` and 3 vector component arrays `u`, `v`, `w`. The cones are drawn exactly at the positions given by `x`, `y` and `z`.
|
Full Usage:
Chart.StreamTube(xyzuvw, ?Name, ?ShowLegend, ?Opacity, ?Text, ?MultiText, ?ColorScale, ?ShowScale, ?ColorBar, ?MaxDisplayed, ?TubeStarts, ?CameraProjectionType, ?Camera, ?UseDefaults)
Parameters:
('a * 'b * 'c * 'd * 'e * 'f) seq
-
Sets the x, y, and z coordinates of the vector field and of the displayed cones together with the x, y, and z components of the vector field.
?Name : string
-
Sets the trace name. The trace name appear as the legend item and on hover
?ShowLegend : bool
-
Determines whether or not an item corresponding to this trace is shown in the legend.
?Opacity : float
-
Sets the opactity of the trace
?Text : 'g
-
Sets a text associated with each datum
?MultiText : 'g seq
-
Sets individual text for each datum
?ColorScale : Colorscale
-
Sets the colorscale
?ShowScale : bool
-
Whether or not to show the colorbar/colorscale
?ColorBar : ColorBar
-
Sets the colorbar
?MaxDisplayed : int
-
The maximum number of displayed segments in a streamtube.
?TubeStarts : StreamTubeStarts
-
Use this object to specify custom tube start positions
?CameraProjectionType : CameraProjectionType
-
Sets the camera projection type of this trace.
?Camera : Camera
-
Sets the camera of this trace.
?UseDefaults : bool
-
If set to false, ignore the global default settings set in `Defaults`
Returns: GenericChart
Type parameters: 'a, 'b, 'c, 'd, 'e, 'f, 'g (requires :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible) |
Creates a streamtube plot, typically used to visualize flow in a vector field. Specify a vector field using 6 1D arrays of equal length: 3 position arrays `x`, `y` and `z` and 3 vector component arrays `u`, `v`, and `w`. By default, the tubes' starting positions will be cut from the vector field's x-z plane at its minimum y value. To specify your own starting position, use `TubeStarts`. The color is encoded by the norm of (u, v, w), and the local radius by the divergence of (u, v, w).
|
Full Usage:
Chart.StreamTube(streamTubeXYZ, streamTubeUVW, ?Name, ?ShowLegend, ?Opacity, ?Text, ?MultiText, ?ColorScale, ?ShowScale, ?ColorBar, ?MaxDisplayed, ?TubeStarts, ?CameraProjectionType, ?Camera, ?UseDefaults)
Parameters:
('a * 'b * 'c) seq
-
Sets the x, y, and z coordinates of the vector field and of the displayed cones.
streamTubeUVW : ('d * 'e * 'f) seq
-
Sets the x, y, and z components of the vector field.
?Name : string
-
Sets the trace name. The trace name appear as the legend item and on hover
?ShowLegend : bool
-
Determines whether or not an item corresponding to this trace is shown in the legend.
?Opacity : float
-
Sets the opactity of the trace
?Text : 'g
-
Sets a text associated with each datum
?MultiText : 'g seq
-
Sets individual text for each datum
?ColorScale : Colorscale
-
Sets the colorscale
?ShowScale : bool
-
Whether or not to show the colorbar/colorscale
?ColorBar : ColorBar
-
Sets the colorbar
?MaxDisplayed : int
-
The maximum number of displayed segments in a streamtube.
?TubeStarts : StreamTubeStarts
-
Use this object to specify custom tube start positions
?CameraProjectionType : CameraProjectionType
-
Sets the camera projection type of this trace.
?Camera : Camera
-
Sets the camera of this trace.
?UseDefaults : bool
-
If set to false, ignore the global default settings set in `Defaults`
Returns: GenericChart
Type parameters: 'a, 'b, 'c, 'd, 'e, 'f, 'g (requires :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible) |
Creates a streamtube plot, typically used to visualize flow in a vector field. Specify a vector field using 6 1D arrays of equal length: 3 position arrays `x`, `y` and `z` and 3 vector component arrays `u`, `v`, and `w`. By default, the tubes' starting positions will be cut from the vector field's x-z plane at its minimum y value. To specify your own starting position, use `TubeStarts`. The color is encoded by the norm of (u, v, w), and the local radius by the divergence of (u, v, w).
|
Full Usage:
Chart.StreamTube(xEncoded, yEncoded, zEncoded, uEncoded, vEncoded, wEncoded, ?Name, ?ShowLegend, ?Opacity, ?Text, ?MultiText, ?ColorScale, ?ShowScale, ?ColorBar, ?MaxDisplayed, ?TubeStarts, ?CameraProjectionType, ?Camera, ?UseDefaults)
Parameters:
EncodedTypedArray
yEncoded : EncodedTypedArray
zEncoded : EncodedTypedArray
uEncoded : EncodedTypedArray
vEncoded : EncodedTypedArray
wEncoded : EncodedTypedArray
?Name : string
?ShowLegend : bool
?Opacity : float
?Text : 'a
?MultiText : 'a seq
?ColorScale : Colorscale
?ShowScale : bool
?ColorBar : ColorBar
?MaxDisplayed : int
?TubeStarts : StreamTubeStarts
?CameraProjectionType : CameraProjectionType
?Camera : Camera
?UseDefaults : bool
Returns: GenericChart
Type parameters: 'a (requires :> System.IConvertible) |
Creates a streamtube plot from encoded vector-field coordinates and components.
|
Full Usage:
Chart.StreamTube(x, y, z, u, v, w, ?Name, ?ShowLegend, ?Opacity, ?Text, ?MultiText, ?ColorScale, ?ShowScale, ?ColorBar, ?MaxDisplayed, ?TubeStarts, ?CameraProjectionType, ?Camera, ?UseDefaults)
Parameters:
'a seq
-
Sets the x coordinates of the vector field and of the displayed cones.
y : 'b seq
-
Sets the y coordinates of the vector field and of the displayed cones.
z : 'c seq
-
Sets the z coordinates of the vector field and of the displayed cones.
u : 'd seq
-
Sets the x components of the vector field.
v : 'e seq
-
Sets the y components of the vector field.
w : 'f seq
-
Sets the z components of the vector field.
?Name : string
-
Sets the trace name. The trace name appear as the legend item and on hover
?ShowLegend : bool
-
Determines whether or not an item corresponding to this trace is shown in the legend.
?Opacity : float
-
Sets the opactity of the trace
?Text : 'g
-
Sets a text associated with each datum
?MultiText : 'g seq
-
Sets individual text for each datum
?ColorScale : Colorscale
-
Sets the colorscale
?ShowScale : bool
-
Whether or not to show the colorbar/colorscale
?ColorBar : ColorBar
-
Sets the colorbar
?MaxDisplayed : int
-
The maximum number of displayed segments in a streamtube.
?TubeStarts : StreamTubeStarts
-
Use this object to specify custom tube start positions
?CameraProjectionType : CameraProjectionType
-
Sets the camera projection type of this trace.
?Camera : Camera
-
Sets the camera of this trace.
?UseDefaults : bool
-
If set to false, ignore the global default settings set in `Defaults`
Returns: GenericChart
Type parameters: 'a, 'b, 'c, 'd, 'e, 'f, 'g (requires :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible and :> System.IConvertible) |
Creates a streamtube plot, typically used to visualize flow in a vector field. Specify a vector field using 6 1D arrays of equal length: 3 position arrays `x`, `y` and `z` and 3 vector component arrays `u`, `v`, and `w`. By default, the tubes' starting positions will be cut from the vector field's x-z plane at its minimum y value. To specify your own starting position, use `TubeStarts`. The color is encoded by the norm of (u, v, w), and the local radius by the divergence of (u, v, w).
|
