Choose the Basic if you need an affordable enclosure that will remain in one permanent location.

Choose the Standard if you want better acoustic control and the ability to move the enclosure. This is the best choice for most churches.

Choose the Premium if you want the highest level of sound control, acoustic treatment, built-in power, and the full wrap clear shield.

While the enclosure is designed to control drum volume and reduce sound bleeding into vocal and stage microphones, it is not a completely soundproof room.

We do not guarantee a specific decibel reduction because every drummer, drum kit, stage, microphone setup, and room is different.

All three models have the same footprint, which is 80 inches by 80 inches with the curved front and a height of 7 feet.

Custom requests can be reviewed, but they may affect the price and production time.

90% of standard acoustic drum kits will fit inside our enclosure. For comparison, it will comfortably fit a 6pc drum set.

If you have a larger kit with more toms, several cymbal stands, electronics, or other equipment, please provide the complete drum kit layout before production. We will help confirm whether everything will fit comfortably.

We use premium clear polycarbonate. It provides excellent visibility while being virtually indestructible.

You can choose side or rear access, depending on your stage space.

The Basic is designed for a fixed installation.

The Standard and Premium include caster wheels so they can be moved when needed. Before moving the enclosure, all caster brakes must be unlocked and all cables must be moved out of the way.

Always push from the enclosure's side framing. Never push directly against the clear shield.

We strongly recommend it for most churches. Adding dedicated AC would be more expensive, bulky, noisy, and may require additional HVAC work.

Our $695 two-fan system quietly brings fresh air toward the drummer while removing hot air from the enclosure. It is extremely effective, does not interfere with the microphones, and keeps the drummer comfortable without the cost or headache of adding air conditioning.

The 2-fan system uses two extremely low-noise fans. The upper exhaust removes hot air while the lower intake brings cooler, fresh air toward the drummer.

It is designed to operate without interfering with the drum microphones.

No. The drum kit, microphones, stands, audio cables, and other production equipment are not included unless they are specifically listed in a custom proposal.

Drum tuning and audio-system optimization may be available as separate services.

Custom colors, finishes, layouts, and special requests can be reviewed after the order is submitted.

Custom work must be approved before production and may affect the final price and completion time.

No. Delivery and professional installation are calculated separately based on the church's location and the requirements of the project.

We will confirm the delivery and installation price before production begins.

We currently serve the lower 48 United States only.

We do not ship to Alaska, Hawaii, U.S. territories, or international locations.

Our current estimated production time is approximately 3 to 6 weeks after all selections, measurements, and required payments are confirmed.

This is an estimate. Your actual delivery and installation schedule will be confirmed before production.

Most installations are completed in a few hours when the stage and installation area are ready.

Large projects, difficult access, custom work, or unexpected site conditions may require additional time.

DIY assembly is not available as of right now. The enclosure installation requires our professional crew to deploy it to guarantee quality control.

Yes. The enclosure is assembled in sections and can be disassembled for relocation.

Because the parts are large and must be handled carefully, we recommend contacting us before moving it to another building or stage.