×
sorted by:
new
hottopcontroversial

Added support for printing stacked baseplates by veroz in gridfinity

[–]veroz[S] 0 points1 point  (0 children)

Hmm, you’d be the first I know to try it. You could always print a sample and play with the gap distance

Making the gridfinity bins 'lighter" by Dependent-Bridge-740 in gridfinity

[–]veroz 9 points10 points  (0 children)

https://gridfinitylayouttool.com/designer can do hex walls, lightweight floor, and whatever wall thickness you want

First big drawer.... by Significant-Steak432 in gridfinity

[–]veroz 3 points4 points  (0 children)

https://gridfinitylayouttool.com/baseplate (also in the sidebar)

First big drawer.... by Significant-Steak432 in gridfinity

[–]veroz 0 points1 point  (0 children)

When you export the zip and import it into your slicer, make sure you auto-arrange the models. This print will require several unique pieces that line up side by side.

edit: or actually, what precisely do you mean by the baseplate was too small?

edit 2: Oh, read the print-guide in the zip file. You need to print multiple copies of certain pieces

Converted existing toolbox by DraconPern in gridfinity

[–]veroz 0 points1 point  (0 children)

It so purdy

Added support for printing stacked baseplates by veroz in gridfinity

[–]veroz[S] 0 points1 point  (0 children)

Yes, the bin designer already supports this!

Where can I find a tool to make cutouts for gridfinity bins by Dependent-Bridge-740 in gridfinity

[–]veroz 2 points3 points  (0 children)

I just added a little thing to https://gridfinitylayouttool.com/designer that could use some testers, go to the cutout editor, click the phone icon, and scan the QR code.

Added support for printing stacked baseplates by veroz in gridfinity

[–]veroz[S] 1 point2 points  (0 children)

Woo! That’s awesome to hear!

Added support for printing stacked baseplates by veroz in gridfinity

[–]veroz[S] 1 point2 points  (0 children)

Exactly, it'll create a separate stack per unique baseplate

Added support for printing stacked baseplates by veroz in gridfinity

[–]veroz[S] 3 points4 points  (0 children)

To be honest, you have too many disparate implementations and none of them are done particularly well. The bin heights do not follow gridfinity spec which is a huge red flag. If anyone prints your bins with and uses them alongside other gridfinity bins they will not match.

Added support for printing stacked baseplates by veroz in gridfinity

[–]veroz[S] 1 point2 points  (0 children)

Thanks! It works by putting a 0.2mm gap between each plate so there’s less squish and the bond is weaker so you can snap them apart.

In your slicer you can also choose to fill the gap with a non-stick filament like PETG for cleaner separation. I’ll add instructions to the tool on how to do that.

Added support for printing stacked baseplates by veroz in gridfinity

[–]veroz[S] 11 points12 points  (0 children)

Hey folks,

I just added vertical stacking to https://gridfinitylayouttool.com/baseplate

I did a test print with 8 stacked baseplates and it came out great! Looking for more testers to try it out and overall feedback on the UI. I had to use a small flat head screwdriver to crack them open a bit but it should be even easier if you use PETG between the gaps.

76
77
Image

Added support for printing stacked baseplates (i.redd.it)

submitted by veroz to r/gridfinity

Need help to find the online generator by Ok_Tip_6051 in gridfinity

[–]veroz 1 point2 points  (0 children)

Great idea! I added the ability to set dividers by mm

Help! How to make a stackable baseplate? by toiavalle in gridfinity

[–]veroz 0 points1 point  (0 children)

https://gridfinitylayouttool.com/designer can do this. Just make a 7x7 bin and enable Lid with stackable top grid then just print the lid.

Need help to find the online generator by Ok_Tip_6051 in gridfinity

[–]veroz 1 point2 points  (0 children)

You can set the half-bin position if you sync with the layout and toggle the settings near the grid dimensions in the layout tab. It's a bit hidden and now that I'm typing this out I should just expose that control in the baseplate generator.

Also could you elaborate on labels? (Because label tabs are already supported)

Need help to find the online generator by Ok_Tip_6051 in gridfinity

[–]veroz 7 points8 points  (0 children)

It’s available now! Give it a spin

Need help to find the online generator by Ok_Tip_6051 in gridfinity

[–]veroz 21 points22 points  (0 children)

I’ll add this to https://gridfinitylayouttool.com right now. Give me 15 minutes

Gridfinity Layout Tool updates: bin designer, UI improvements, and more by veroz in gridfinity

[–]veroz[S] 1 point2 points  (0 children)

They are saved to your browser by default. You can log in with google or GitHub to enable online storage

How do I print bins longer than my 256^3 print area? by TomF1965 in gridfinity

[–]veroz 1 point2 points  (0 children)

Check out https://gridfinitylayouttool.com/baseplate

Web based layout planner? by slise-rd in gridfinity

[–]veroz 0 points1 point  (0 children)

gridfinitylayouttool.com

looking for the trifecta by pacman529 in gridfinity

[–]veroz 2 points3 points  (0 children)

What would be your ideal look like? I'd be happy to extend what gridfinitylayouttool.com/baseplate can provide

Bin generator for scalable open bins and tiles by SurPelle in gridfinity

[–]veroz 5 points6 points  (0 children)

Check out my tool: https://gridfinitylayouttool.com/designer

Baseplate connectors, cutout editor, split bins, and a call for testers! by veroz in gridfinity

[–]veroz[S] 0 points1 point  (0 children)

Thanks, taking a look

Seeking some advice with an 'odd size' box to use with gridfinity by Dependent-Bridge-740 in gridfinity

[–]veroz 1 point2 points  (0 children)

Works now!

view more: next ›