Microsoft

Email data is crucial in today's corporate environment. PST files used in Microsoft Outlook store employee emails, contacts, calendars & important business records. However, companies often face a serious problem: the PST file is found, but the password is missing.I recently encountered a corporate PST file issue where the Outlook PST file was found, but the password was missing. After much experimentation, I discovered the Softaken PST Password Removal Tool, & it proved to be quite helpful. The best part about this tool is its simple interface, which makes it easy to use even without any technical knowledge. In just a few steps, the password was removed from the PST file, leaving all data secure. There was no data loss or damage. This program can be a trustworthy & effective solution to recover passwords from old or corporate

We have been setting up a new SharePoint library for contracts and using the SP integration. When I and a couple of other users test it, it returns the doc the source folder/document set.  We are using Document Sets but works the same for folders.Our main user however gets signed docs returned to the root folder. DS site says it’s a know issue. Docusign documentationAnyone found a fix yet?  

Hello,Some time ago I’ve developed a Power Automate flow to automatically send envelopes by using template and to a specific recipients. Few days ago I’ve noticed, that flow suddenly started to fail due to the error message: I was not changing anything in Power Automate at all. It just stopped working. I do not have access to the subscription admin panel, but I can guide our administrator to verify what’s wrong. What should I do? What’s the issue? Templates are shared with the account what is being used to send the documents and were before. I can see them during the action configuration, but I can’t use them any longer.

Hello, Anyone having problems with the new version sharepointfororganization 4.2.1 ?After installing it in the app catalog it is available to install on your SharePoint site. When adding it to you sharepoint site it is installed succesfully on it but on the site it is not visible or possible to initiate Docusign. When you had a previous version installed on the site and you do an update it’s not a problem. So only when it’s a new installation it’s is not possible to use it after installation.  

I received an email today reminding me about the migration to Microsoft Azure however I am not sure if I need to take any action.   These are the options : If you restrict network connections and allow-list specific Docusign IP addresses, you must update your allow-list to include all current Docusign IP ranges from our

I have a docusign template where the first signer role is left empty because it need to be dynamic. The first role ‘Originator’ is emptyI am using Power automate to send the Originator detail and invoke the template. Here is my power automate Step 1. Created the envelope using the template  → No IssuesStep 2. Added the document as Base64 to the envelope → No issuesStep 3. Added the recipient. In this step I provided the role name, Signer name and the signer email  Step 4. When I send the envelo

Hi all!!I would like to ask for your help in this situation.I’m building a a PowerAutomate flow that send a PDF with editable field to be filled, however I cant make that possible in PowerAutomate (although its easy to do it in the web).Do you know how can I do it?? Thanks a lot in advance!

Is there a way to get envelop status?I want to set some condition based on the status of the specifict envelop I sent via PowerAutomate in the same flow.If is signed: Update to SharePoint If is waiting for signature: Wait/Send reminder If is declines: Send email + additional actionsThanks you and best regards.

Hello there,i have installed the DocuSign Integration for Dynamics 365 via App Source. I have enabled Oauth and Sharepoint. The Documents are availabe. Now when trying to “Sign with DocuSign” or “Get Signatures” I get the follwig Error: 0x80040265 Error in CreateEnvelopeOAuth. Error in CreateEnvelopeOAuth   at DynamicsRedirector.Services.DS.CreateEnvelopeOAuth(String emailSubject, String accountId, String postbackUrl, String userId) in /__w/47/s/src/DynamicsRedirector/Services/DS.cs:line 1200 Can you please help me out here? Best Regards 

I’ve acquired the new signing certificate for Docusign and SSO, however I am unable to sign in to the portal as admin to apply the new certificate because of the above issue.This is affecting a lot of our users, and we’ll work to create a contingency for future reference, however I desperately need help now.Is there anyone from Docusign Technical Support that can assist?Many thanks,Shaun

Hello, We are experiencing issues with Docusign connection to Dynamics 365 CRM dropping off and requiring manual intervention to connect the 2 again, typically after a period of time where users are noticing documents are not sending. It’s not very often but often enough that it’s becoming a bit annoying for all involved when it happens. I have not seen any reason for the connection dropping, no passwords are changed and re-connecting is simply going to the Docusign settings in CRM and pressing “Connect”What we really need is some form of alert to us to tell us when the connection has been lost so that we can avoid delays, is there any way to implement this?

Hello,I want to test this scenario for my client : In Dynamics 365, when I start form accoutn and click on “Send with Docusign”, I can’t choose an envelop template.On a technical side, I activate Docusign integration in D365, I created 2 envelop template in docusign, I set all D365 privileges for docusign table.When I go on Docusign Admin setting in Dynamics 365, I can’t see any module for templates.Could you help me please ?Notes : I test with the TRIAL.

Hello DocuSign Team,My name is Mahesh, and I am part of the Application Compatibility team at Microsoft. Our team works to ensure that third-party applications, including DocuSign, continue to function reliably across both pre-release and in-market versions of the Windows operating systemI am getting “Unknown error, please try again later” while trying to signup for DocuSign UWP app via Microsoft Store.Could you please address this in resolving.Thanks,Mahesh

We are trying to setup SCIM connector for DocuSign in Entra for user provisioning and de-provisioning however when while testing the ‘connection after copying the relevant into (Base/tenant URL and token) to Entra, the test connection is failed with error “Your application is not reachable” (reference snip attached).Any support or guidance would be appreciated.

I have seen lot of questions around this like 1 year ago (some 6 months ago), but just want to check if that’s still not possible.I have requirement to send envelope as(Sender/From) different users/email addresses (changes dynamically based on certain conditions) and do not want sender to appear as user who makes the power automate connection.Is this possible? or still limitation?

Sending two or more documents per envelope to a single signer.  They must sign the documents in a specific order.  Doc#2 cannot be available for signing until they have signed Doc #1, etc.  Any Ideas?  I’m using Power Automate because it’s a more complicated flow.  I have everything else but this piece of the puzzle.  Any ideas?

Hi community...as an admin, is there a super quick way to find details on an envelope ID without running a report...in other words, I have an envelope ID...can I enter that within the platform to find all associated details WITHOUT having to run an envelope report and look within that download? Hope this makes sense? Tks, Mike

Hi everyone,I want to add multiple documents to one envelope. Each Document should only be signed once. Since all documents are duplicated from a template and I came up with the ideo of using a specific document propertie as signature anchor. But in my tests this did not work. (When I am using the same anchor in each document, each document has to be signed as often as documents are in the envelope)Has anyone an idea why this does not work or how it could work?Thank you all in advance.Best regardsJens

Is there a way to query the status of an envelope?  I’d like to send out reports with the status of all uncompleted envelopes. Thanks

Hello,  I am trying to use PowerAutomate and Docusign to complete an action of filling in a document created in Docusign Word Template Assistant, based on SharePoint data, and then send this completed for signing.  The workflow runs, but each time, and with multiple tries of different file names (E.g with file extensions, renaming the file, etc) I get a failure: ConnectorException": body "Status code=BadRequest, Message='ValidationFailure: No document found matching the provided name'" The workflow uses: Create envelope using template with recipientsGet document info from envelopeUpdate document generation form fields from envelopeSend Envelope  Any ideas?James 

Hi As of July 1, 2024 Microsoft is no longer allowing Add-In for new tenant.We want to be able to send a document for Esign with our Docusign account will inside the document library. I follow all the steps provided by Docusign and do not see Docusign option anywhere on in Sharepoint.  Does anyone know how we can set this up? Thanks in advance.

I’m currently experiencing an issue where files are not being saved back to SharePoint from DocuSign. After reviewing the logs, I found the following error:  Error:https://services.docusign.net/integrations-sharepoint/v1.0/api/postback?language=en-US :: Error - The underlying connection was closed: An unexpected error occurred on a send.

A member of our C-level team would like to send a group of people an email from within our business email account with a link to a docusign document and also an attachment that is for information only. Is there a way to do that? The document we’re sending for signature requires some explanation, and the sender prefers that the document come from his email address. Thanks for your help. I’ve been searching the community postings but haven’t seen anything particular on this topic. 

Hello everyone,I'm encountering an issue with an action in my power automate workflow and I'm hoping someone here can help me resolve it. Here are the details:Error: Action 'Create_envelope' failedError Message:```<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head><meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/><title>404 - File or directory not found.</title><style type="text/css"><!--body{margin:0;font-size:.7em;font-family:Verdana, Arial, Helvetica, sans-serif;background:#EEEEEE;}fieldset{padding:0 15px 10px 15px;} h1{font-size:2.4em;margin:0;color:#FFF;}h2{font-size:1.7em;margin:0;color:#CC0000;} h3{font-size:1.2em;margin:10px 0 0 0;color:#000000;} #h

I have scenario of conditional logic, like say there are 5 checkbox options (option1, option2, ….) and 3 sub options (option A, option B..) (which i can create using add tab action).Now the requirement is, when user selects option 1 or option 3, then Option A is required and when user selected option 2, then Option B is required…I see there is a way to implement this in REST API, but i don’t see option in any power automate actions, so, is conditional logic possible to implement in power automate built-in connector?