./cad/spice, General-purpose circuit simulation program

[ Image CVSweb ] [ Image Homepage ] [ Image RSS ] [ Image Required by ] [ Image Add to tracker ]

Branch: CURRENT, Version: 3f5.1nb6, Package name: spice-3f5.1nb6, Maintainer: pkgsrc-users

SPICE is a general-purpose circuit simulation program for nonlinear dc,
nonlinear transient, and linear ac analyses. Circuits may contain resistors,
capacitors, inductors, mutual inductors, independent voltage and current
sources, four types of dependent sources, lossless and lossy transmission
lines (two separate implementations), switches, uniform distributed RC
lines, and the five most common semiconductor devices: diodes, BJTs, JFETs,
MESFETs, and MOSFETs.


Required to build:
[pkgtools/x11-links] [pkgtools/cwrappers]

Master sites:

Filesize: 2037.625 KB

Version history: (Expand)

CVS history: (Expand)


   2026-02-09 08:11:53 by Thomas Klausner | Files touched by this commit (1) 
Log message:
spice: comment out dead site
   2026-01-03 23:37:32 by Thomas Klausner | Files touched by this commit (3) 
Log message:
spice: fix build on NetBSD-current
   2025-09-21 23:22:41 by Thomas Klausner | Files touched by this commit (37) 
Log message:
*: reset maintainer
   2021-10-26 12:04:17 by Nia Alarie | Files touched by this commit (63) 
Log message:
cad: Replace RMD160 checksums with BLAKE2s checksums

All checksums have been double-checked against existing RMD160 and
SHA512 hashes
   2021-10-07 15:20:33 by Nia Alarie | Files touched by this commit (63) 
Log message:
cad: Remove SHA1 hashes for distfiles
   2021-04-21 11:07:09 by Thomas Klausner | Files touched by this commit (2) 
Log message:
spice: remove dead download location
   2020-05-20 08:09:10 by Roland Illig | Files touched by this commit (52) 
Log message:
mark packages that fail with -Werror=char-subscripts

These packages are susceptible to bugs when confronted with non-ASCII
characters.

See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94182.

It takes some time to analyze and fix these individually, therefore they
are only marked as "needs work".
   2019-06-08 13:04:30 by Roland Illig | Files touched by this commit (43) 
Log message:
cad/*: let pkglint fix indentation, variable alignment, and LOCALBASE

pkglint -Wall -r -F cad

Manually fixed the indentation in cad/ghdl/Makefile because SITES.* was
(by the current definition) not long enough to count as an outlier line,
and because of this, all other lines were aligned to that line.