mm patches #1

Rasenkai · 2023-09-19T16:03:11Z

No description provided.

What watermark boosting does is preemptively fire up kswapd to free memory when there hasn't been an allocation failure. It does this by increasing kswapd's high watermark goal and then firing up kswapd. The reason why this causes freezes is because, with the increased high watermark goal, kswapd will steal memory from processes that need it in order to make forward progress. These processes will, in turn, try to allocate memory again, which will cause kswapd to steal necessary pages from those processes again, in a positive feedback loop known as page thrashing. When page thrashing occurs, your system is essentially livelocked until the necessary forward progress can be made to stop processes from trying to continuously allocate memory and trigger kswapd to steal it back. This problem already occurs with kswapd *without* watermark boosting, but it's usually only encountered on machines with a small amount of memory and/or a slow CPU. Watermark boosting just makes the existing problem worse enough to notice on higher spec'd machines. Disable watermark boosting by default since it's a total dumpster fire. I can't imagine why anyone would want to explicitly enable it, but the option is there in case someone does. Signed-off-by: Sultan Alsawaf <[email protected]>

Keeping kswapd running when all the failed allocations that invoked it are satisfied incurs a high overhead due to unnecessary page eviction and writeback, as well as spurious VM pressure events to various registered shrinkers. When kswapd doesn't need to work to make an allocation succeed anymore, stop it prematurely to save resources. Signed-off-by: Sultan Alsawaf <[email protected]>

The page allocator wakes all kswapds in an allocation context's allowed nodemask in the slow path, so it doesn't make sense to have the kswapd- waiter count per each NUMA node. Instead, it should be a global counter to stop all kswapds when there are no failed allocation requests. Signed-off-by: Sultan Alsawaf <[email protected]>

Throttled direct reclaimers will wake up kswapd and wait for kswapd to satisfy their page allocation request, even when the failed allocation lacks the __GFP_KSWAPD_RECLAIM flag in its gfp mask. As a result, kswapd may think that there are no waiters and thus exit prematurely, causing throttled direct reclaimers lacking __GFP_KSWAPD_RECLAIM to stall on waiting for kswapd to wake them up. Incrementing the kswapd_waiters counter when such direct reclaimers become throttled fixes the problem. Signed-off-by: Sultan Alsawaf <[email protected]>

On-demand compaction works fine assuming that you don't have a need to spam the page allocator nonstop for large order page allocations. Signed-off-by: Sultan Alsawaf <[email protected]>

There is noticeable scheduling latency and heavy zone lock contention stemming from rmqueue_bulk's single hold of the zone lock while doing its work, as seen with the preemptoff tracer. There's no actual need for rmqueue_bulk() to hold the zone lock the entire time; it only does so for supposed efficiency. As such, we can relax the zone lock and even reschedule when IRQs are enabled in order to keep the scheduling delays and zone lock contention at bay. Forward progress is still guaranteed, as the zone lock can only be relaxed after page removal. With this change, rmqueue_bulk() no longer appears as a serious offender in the preemptoff tracer, and system latency is noticeably improved. Signed-off-by: Sultan Alsawaf <[email protected]>

Allocating pages with __get_free_page is slower than going through the slab allocator to grab free pages out from a pool. These are the results from running the code at the bottom of this message: [ 1.278602] speedtest: __get_free_page: 9 us [ 1.278606] speedtest: kmalloc: 4 us [ 1.278609] speedtest: kmem_cache_alloc: 4 us [ 1.278611] speedtest: vmalloc: 13 us kmalloc and kmem_cache_alloc (which is what kmalloc uses for common sizes behind the scenes) are the fastest choices. Use kmalloc to speed up sg list allocation. This is the code used to produce the above measurements: static int speedtest(void *data) { static const struct sched_param sched_max_rt_prio = { .sched_priority = MAX_RT_PRIO - 1 }; volatile s64 ctotal = 0, gtotal = 0, ktotal = 0, vtotal = 0; struct kmem_cache *page_pool; int i, j, trials = 1000; volatile ktime_t start; void *ptr[100]; sched_setscheduler_nocheck(current, SCHED_FIFO, &sched_max_rt_prio); page_pool = kmem_cache_create("pages", PAGE_SIZE, PAGE_SIZE, SLAB_PANIC, NULL); for (i = 0; i < trials; i++) { start = ktime_get(); for (j = 0; j < ARRAY_SIZE(ptr); j++) while (!(ptr[j] = kmem_cache_alloc(page_pool, GFP_KERNEL))); ctotal += ktime_us_delta(ktime_get(), start); for (j = 0; j < ARRAY_SIZE(ptr); j++) kmem_cache_free(page_pool, ptr[j]); start = ktime_get(); for (j = 0; j < ARRAY_SIZE(ptr); j++) while (!(ptr[j] = (void *)__get_free_page(GFP_KERNEL))); gtotal += ktime_us_delta(ktime_get(), start); for (j = 0; j < ARRAY_SIZE(ptr); j++) free_page((unsigned long)ptr[j]); start = ktime_get(); for (j = 0; j < ARRAY_SIZE(ptr); j++) while (!(ptr[j] = __kmalloc(PAGE_SIZE, GFP_KERNEL))); ktotal += ktime_us_delta(ktime_get(), start); for (j = 0; j < ARRAY_SIZE(ptr); j++) kfree(ptr[j]); start = ktime_get(); *ptr = vmalloc(ARRAY_SIZE(ptr) * PAGE_SIZE); vtotal += ktime_us_delta(ktime_get(), start); vfree(*ptr); } kmem_cache_destroy(page_pool); printk("%s: __get_free_page: %lld us\n", __func__, gtotal / trials); printk("%s: __kmalloc: %lld us\n", __func__, ktotal / trials); printk("%s: kmem_cache_alloc: %lld us\n", __func__, ctotal / trials); printk("%s: vmalloc: %lld us\n", __func__, vtotal / trials); complete(data); return 0; } static int __init start_test(void) { DECLARE_COMPLETION_ONSTACK(done); BUG_ON(IS_ERR(kthread_run(speedtest, &done, "malloc_test"))); wait_for_completion(&done); return 0; } late_initcall(start_test); Signed-off-by: Sultan Alsawaf <[email protected]>

The RCU read lock isn't necessary in list_lru_count_one() when the condition that requires RCU (CONFIG_MEMCG && !CONFIG_SLOB) isn't met. The highly-frequent RCU lock and unlock adds measurable overhead to the shrink_slab() path when it isn't needed. As such, we can simply omit the RCU read lock in this case to improve performance. Signed-off-by: Sultan Alsawaf <[email protected]> Signed-off-by: Kazuki Hashimoto <[email protected]>

[ Upstream commit 7962ef1 ] In 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 torvalds#8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 torvalds#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 torvalds#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 torvalds#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 torvalds#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 torvalds#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 torvalds#8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 torvalds#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 torvalds#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 torvalds#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 torvalds#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 torvalds#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1". Fixes: 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ef23cb5 ] While debugging a segfault on 'perf lock contention' without an available perf.data file I noticed that it was basically calling: perf_session__delete(ERR_PTR(-1)) Resulting in: (gdb) run lock contention Starting program: /root/bin/perf lock contention [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". failed to open perf.data: No such file or directory (try 'perf record' first) Initializing perf session failed Program received signal SIGSEGV, Segmentation fault. 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 2858 if (!session->auxtrace) (gdb) p session $1 = (struct perf_session *) 0xffffffffffffffff (gdb) bt #0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 #1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300 #2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161 #3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604 #4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322 #5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375 #6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419 #7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535 (gdb) So just set it to NULL after using PTR_ERR(session) to decode the error as perf_session__delete(NULL) is supported. The same problem was found in 'perf top' after an audit of all perf_session__new() failure handling. Fixes: 6ef81c5 ("perf session: Return error code for perf_session__new() function on failure") Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Jeremie Galarneau <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kate Stewart <[email protected]> Cc: Mamatha Inamdar <[email protected]> Cc: Mukesh Ojha <[email protected]> Cc: Nageswara R Sastry <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Shawn Landden <[email protected]> Cc: Song Liu <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tzvetomir Stoyanov <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit abaf1e0 ] While debugging a segfault on 'perf lock contention' without an available perf.data file I noticed that it was basically calling: perf_session__delete(ERR_PTR(-1)) Resulting in: (gdb) run lock contention Starting program: /root/bin/perf lock contention [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". failed to open perf.data: No such file or directory (try 'perf record' first) Initializing perf session failed Program received signal SIGSEGV, Segmentation fault. 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 2858 if (!session->auxtrace) (gdb) p session $1 = (struct perf_session *) 0xffffffffffffffff (gdb) bt #0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 #1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300 #2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161 #3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604 #4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322 #5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375 #6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419 #7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535 (gdb) So just set it to NULL after using PTR_ERR(session) to decode the error as perf_session__delete(NULL) is supported. Fixes: eef4fee ("perf lock: Dynamically allocate lockhash_table") Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mamatha Inamdar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Ross Zwisler <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 82ba0ff ] We should not call trace_handshake_cmd_done_err() if socket lookup has failed. Also we should call trace_handshake_cmd_done_err() before releasing the file, otherwise dereferencing sock->sk can return garbage. This also reverts 7afc6d0 ("net/handshake: Fix uninitialized local variable") Unable to handle kernel paging request at virtual address dfff800000000003 KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfff800000000003] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 5986 Comm: syz-executor292 Not tainted 6.5.0-rc7-syzkaller-gfe4469582053 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193 lr : handshake_nl_done_doit+0x180/0x9c8 sp : ffff800096e37180 x29: ffff800096e37200 x28: 1ffff00012dc6e34 x27: dfff800000000000 x26: ffff800096e373d0 x25: 0000000000000000 x24: 00000000ffffffa8 x23: ffff800096e373f0 x22: 1ffff00012dc6e38 x21: 0000000000000000 x20: ffff800096e371c0 x19: 0000000000000018 x18: 0000000000000000 x17: 0000000000000000 x16: ffff800080516cc4 x15: 0000000000000001 x14: 1fffe0001b14aa3b x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000003 x8 : 0000000000000003 x7 : ffff800080afe47c x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800080a88078 x2 : 0000000000000001 x1 : 00000000ffffffa8 x0 : 0000000000000000 Call trace: handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193 genl_family_rcv_msg_doit net/netlink/genetlink.c:970 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1050 [inline] genl_rcv_msg+0x96c/0xc50 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2549 genl_rcv+0x38/0x50 net/netlink/genetlink.c:1078 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x834/0xb18 net/netlink/af_netlink.c:1914 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x56c/0x840 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmsg+0x26c/0x33c net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2584 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: 12800108 b90043e8 910062b3 d343fe68 (387b6908) Fixes: 3b3009e ("net/handshake: Create a NETLINK service for handling handshake requests") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Chuck Lever <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a96a44a ] './test_progs -t test_local_storage' reported a splat: [ 27.137569] ============================= [ 27.138122] [ BUG: Invalid wait context ] [ 27.138650] 6.5.0-03980-gd11ae1b16b0a torvalds#247 Tainted: G O [ 27.139542] ----------------------------- [ 27.140106] test_progs/1729 is trying to lock: [ 27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130 [ 27.141834] other info that might help us debug this: [ 27.142437] context-{5:5} [ 27.142856] 2 locks held by test_progs/1729: [ 27.143352] #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40 [ 27.144492] #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0 [ 27.145855] stack backtrace: [ 27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G O 6.5.0-03980-gd11ae1b16b0a torvalds#247 [ 27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 27.149127] Call Trace: [ 27.149490] <TASK> [ 27.149867] dump_stack_lvl+0x130/0x1d0 [ 27.152609] dump_stack+0x14/0x20 [ 27.153131] __lock_acquire+0x1657/0x2220 [ 27.153677] lock_acquire+0x1b8/0x510 [ 27.157908] local_lock_acquire+0x29/0x130 [ 27.159048] obj_cgroup_charge+0xf4/0x3c0 [ 27.160794] slab_pre_alloc_hook+0x28e/0x2b0 [ 27.161931] __kmem_cache_alloc_node+0x51/0x210 [ 27.163557] __kmalloc+0xaa/0x210 [ 27.164593] bpf_map_kzalloc+0xbc/0x170 [ 27.165147] bpf_selem_alloc+0x130/0x510 [ 27.166295] bpf_local_storage_update+0x5aa/0x8e0 [ 27.167042] bpf_fd_sk_storage_update_elem+0xdb/0x1a0 [ 27.169199] bpf_map_update_value+0x415/0x4f0 [ 27.169871] map_update_elem+0x413/0x550 [ 27.170330] __sys_bpf+0x5e9/0x640 [ 27.174065] __x64_sys_bpf+0x80/0x90 [ 27.174568] do_syscall_64+0x48/0xa0 [ 27.175201] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 27.175932] RIP: 0033:0x7effb40e41ad [ 27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8 [ 27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141 [ 27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad [ 27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002 [ 27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788 [ 27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000 [ 27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000 [ 27.184958] </TASK> It complains about acquiring a local_lock while holding a raw_spin_lock. It means it should not allocate memory while holding a raw_spin_lock since it is not safe for RT. raw_spin_lock is needed because bpf_local_storage supports tracing context. In particular for task local storage, it is easy to get a "current" task PTR_TO_BTF_ID in tracing bpf prog. However, task (and cgroup) local storage has already been moved to bpf mem allocator which can be used after raw_spin_lock. The splat is for the sk storage. For sk (and inode) storage, it has not been moved to bpf mem allocator. Using raw_spin_lock or not, kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context. However, the local storage helper requires a verifier accepted sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running a bpf prog in a kzalloc unsafe context and also able to hold a verifier accepted sk pointer) could happen. This patch avoids kzalloc after raw_spin_lock to silent the splat. There is an existing kzalloc before the raw_spin_lock. At that point, a kzalloc is very likely required because a lookup has just been done before. Thus, this patch always does the kzalloc before acquiring the raw_spin_lock and remove the later kzalloc usage after the raw_spin_lock. After this change, it will have a charge and then uncharge during the syscall bpf_map_update_elem() code path. This patch opts for simplicity and not continue the old optimization to save one charge and uncharge. This issue is dated back to the very first commit of bpf_sk_storage which had been refactored multiple times to create task, inode, and cgroup storage. This patch uses a Fixes tag with a more recent commit that should be easier to do backport. Fixes: b00fa38 ("bpf: Enable non-atomic allocations in local storage") Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f4f8a78 ] The opt_num field is controlled by user mode and is not currently validated inside the kernel. An attacker can take advantage of this to trigger an OOB read and potentially leak information. BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88 Read of size 2 at addr ffff88804bc64272 by task poc/6431 CPU: 1 PID: 6431 Comm: poc Not tainted 6.0.0-rc4 #1 Call Trace: nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88 nf_osf_find+0x186/0x2f0 net/netfilter/nfnetlink_osf.c:281 nft_osf_eval+0x37f/0x590 net/netfilter/nft_osf.c:47 expr_call_ops_eval net/netfilter/nf_tables_core.c:214 nft_do_chain+0x2b0/0x1490 net/netfilter/nf_tables_core.c:264 nft_do_chain_ipv4+0x17c/0x1f0 net/netfilter/nft_chain_filter.c:23 [..] Also add validation to genre, subtype and version fields. Fixes: 11eeef4 ("netfilter: passive OS fingerprint xtables match") Reported-by: Lucas Leong <[email protected]> Signed-off-by: Wander Lairson Costa <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9b5ba5c ] Deliver audit log from __nf_tables_dump_rules(), table dereference at the end of the table list loop might point to the list head, leading to this crash. [ 4137.407349] BUG: unable to handle page fault for address: 00000000001f3c50 [ 4137.407357] #PF: supervisor read access in kernel mode [ 4137.407359] #PF: error_code(0x0000) - not-present page [ 4137.407360] PGD 0 P4D 0 [ 4137.407363] Oops: 0000 [#1] PREEMPT SMP PTI [ 4137.407365] CPU: 4 PID: 500177 Comm: nft Not tainted 6.5.0+ torvalds#277 [ 4137.407369] RIP: 0010:string+0x49/0xd0 [ 4137.407374] Code: ff 77 36 45 89 d1 31 f6 49 01 f9 66 45 85 d2 75 19 eb 1e 49 39 f8 76 02 88 07 48 83 c7 01 83 c6 01 48 83 c2 01 4c 39 cf 74 07 <0f> b6 02 84 c0 75 e2 4c 89 c2 e9 58 e5 ff ff 48 c7 c0 0e b2 ff 81 [ 4137.407377] RSP: 0018:ffff8881179737f0 EFLAGS: 00010286 [ 4137.407379] RAX: 00000000001f2c50 RBX: ffff888117973848 RCX: ffff0a00ffffff04 [ 4137.407380] RDX: 00000000001f3c50 RSI: 0000000000000000 RDI: 0000000000000000 [ 4137.407381] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffffffff [ 4137.407383] R10: ffffffffffffffff R11: ffff88813584d200 R12: 0000000000000000 [ 4137.407384] R13: ffffffffa15cf709 R14: 0000000000000000 R15: ffffffffa15cf709 [ 4137.407385] FS: 00007fcfc18bb580(0000) GS:ffff88840e700000(0000) knlGS:0000000000000000 [ 4137.407387] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4137.407388] CR2: 00000000001f3c50 CR3: 00000001055b2001 CR4: 00000000001706e0 [ 4137.407390] Call Trace: [ 4137.407392] <TASK> [ 4137.407393] ? __die+0x1b/0x60 [ 4137.407397] ? page_fault_oops+0x6b/0xa0 [ 4137.407399] ? exc_page_fault+0x60/0x120 [ 4137.407403] ? asm_exc_page_fault+0x22/0x30 [ 4137.407408] ? string+0x49/0xd0 [ 4137.407410] vsnprintf+0x257/0x4f0 [ 4137.407414] kvasprintf+0x3e/0xb0 [ 4137.407417] kasprintf+0x3e/0x50 [ 4137.407419] nf_tables_dump_rules+0x1c0/0x360 [nf_tables] [ 4137.407439] ? __alloc_skb+0xc3/0x170 [ 4137.407442] netlink_dump+0x170/0x330 [ 4137.407447] __netlink_dump_start+0x227/0x300 [ 4137.407449] nf_tables_getrule+0x205/0x390 [nf_tables] Deliver audit log only once at the end of the rule dump+reset for consistency with the set dump+reset. Ensure audit reset access to table under rcu read side lock. The table list iteration holds rcu read lock side, but recent audit code dereferences table object out of the rcu read lock side. Fixes: ea078ae ("netfilter: nf_tables: Audit log rule reset") Fixes: 7e9be11 ("netfilter: nf_tables: Audit log setelem reset") Signed-off-by: Pablo Neira Ayuso <[email protected]> Acked-by: Phil Sutter <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 768d612 upstream. Yikebaer reported an issue: ================================================================== BUG: KASAN: slab-use-after-free in ext4_es_insert_extent+0xc68/0xcb0 fs/ext4/extents_status.c:894 Read of size 4 at addr ffff888112ecc1a4 by task syz-executor/8438 CPU: 1 PID: 8438 Comm: syz-executor Not tainted 6.5.0-rc5 #1 Call Trace: [...] kasan_report+0xba/0xf0 mm/kasan/report.c:588 ext4_es_insert_extent+0xc68/0xcb0 fs/ext4/extents_status.c:894 ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680 ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462 ext4_zero_range fs/ext4/extents.c:4622 [inline] ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721 [...] Allocated by task 8438: [...] kmem_cache_zalloc include/linux/slab.h:693 [inline] __es_alloc_extent fs/ext4/extents_status.c:469 [inline] ext4_es_insert_extent+0x672/0xcb0 fs/ext4/extents_status.c:873 ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680 ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462 ext4_zero_range fs/ext4/extents.c:4622 [inline] ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721 [...] Freed by task 8438: [...] kmem_cache_free+0xec/0x490 mm/slub.c:3823 ext4_es_try_to_merge_right fs/ext4/extents_status.c:593 [inline] __es_insert_extent+0x9f4/0x1440 fs/ext4/extents_status.c:802 ext4_es_insert_extent+0x2ca/0xcb0 fs/ext4/extents_status.c:882 ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680 ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462 ext4_zero_range fs/ext4/extents.c:4622 [inline] ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721 [...] ================================================================== The flow of issue triggering is as follows: 1. remove es raw es es removed es1 |-------------------| -> |----|.......|------| 2. insert es es insert es1 merge with es es1 merge with es and free es1 |----|.......|------| -> |------------|------| -> |-------------------| es merges with newes, then merges with es1, frees es1, then determines if es1->es_len is 0 and triggers a UAF. The code flow is as follows: ext4_es_insert_extent es1 = __es_alloc_extent(true); es2 = __es_alloc_extent(true); __es_remove_extent(inode, lblk, end, NULL, es1) __es_insert_extent(inode, &newes, es1) ---> insert es1 to es tree __es_insert_extent(inode, &newes, es2) ext4_es_try_to_merge_right ext4_es_free_extent(inode, es1) ---> es1 is freed if (es1 && !es1->es_len) // Trigger UAF by determining if es1 is used. We determine whether es1 or es2 is used immediately after calling __es_remove_extent() or __es_insert_extent() to avoid triggering a UAF if es1 or es2 is freed. Reported-by: Yikebaer Aizezi <[email protected]> Closes: https://lore.kernel.org/lkml/CALcu4raD4h9coiyEBL4Bm0zjDwxC2CyPiTwsP3zFuhot6y9Beg@mail.gmail.com Fixes: 2a69c45 ("ext4: using nofail preallocation in ext4_es_insert_extent()") Cc: [email protected] Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a3ab557 upstream. Let's flush the inode being aborted atomic operation to avoid stale dirty inode during eviction in this call stack: f2fs_mark_inode_dirty_sync+0x22/0x40 [f2fs] f2fs_abort_atomic_write+0xc4/0xf0 [f2fs] f2fs_evict_inode+0x3f/0x690 [f2fs] ? sugov_start+0x140/0x140 evict+0xc3/0x1c0 evict_inodes+0x17b/0x210 generic_shutdown_super+0x32/0x120 kill_block_super+0x21/0x50 deactivate_locked_super+0x31/0x90 cleanup_mnt+0x100/0x160 task_work_run+0x59/0x90 do_exit+0x33b/0xa50 do_group_exit+0x2d/0x80 __x64_sys_exit_group+0x14/0x20 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd This triggers f2fs_bug_on() in f2fs_evict_inode: f2fs_bug_on(sbi, is_inode_flag_set(inode, FI_DIRTY_INODE)); This fixes the syzbot report: loop0: detected capacity change from 0 to 131072 F2FS-fs (loop0): invalid crc value F2FS-fs (loop0): Found nat_bits in checkpoint F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4 ------------[ cut here ]------------ kernel BUG at fs/f2fs/inode.c:869! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 5014 Comm: syz-executor220 Not tainted 6.4.0-syzkaller-11479-g6cd06ab12d1a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 RIP: 0010:f2fs_evict_inode+0x172d/0x1e00 fs/f2fs/inode.c:869 Code: ff df 48 c1 ea 03 80 3c 02 00 0f 85 6a 06 00 00 8b 75 40 ba 01 00 00 00 4c 89 e7 e8 6d ce 06 00 e9 aa fc ff ff e8 63 22 e2 fd <0f> 0b e8 5c 22 e2 fd 48 c7 c0 a8 3a 18 8d 48 ba 00 00 00 00 00 fc RSP: 0018:ffffc90003a6fa00 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff8880273b8000 RSI: ffffffff83a2bd0d RDI: 0000000000000007 RBP: ffff888077db91b0 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888029a3c000 R13: ffff888077db9660 R14: ffff888029a3c0b8 R15: ffff888077db9c50 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1909bb9000 CR3: 00000000276a9000 CR4: 0000000000350ef0 Call Trace: <TASK> evict+0x2ed/0x6b0 fs/inode.c:665 dispose_list+0x117/0x1e0 fs/inode.c:698 evict_inodes+0x345/0x440 fs/inode.c:748 generic_shutdown_super+0xaf/0x480 fs/super.c:478 kill_block_super+0x64/0xb0 fs/super.c:1417 kill_f2fs_super+0x2af/0x3c0 fs/f2fs/super.c:4704 deactivate_locked_super+0x98/0x160 fs/super.c:330 deactivate_super+0xb1/0xd0 fs/super.c:361 cleanup_mnt+0x2ae/0x3d0 fs/namespace.c:1254 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xa9a/0x29a0 kernel/exit.c:874 do_group_exit+0xd4/0x2a0 kernel/exit.c:1024 __do_sys_exit_group kernel/exit.c:1035 [inline] __se_sys_exit_group kernel/exit.c:1033 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1033 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f309be71a09 Code: Unable to access opcode bytes at 0x7f309be719df. RSP: 002b:00007fff171df518 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f309bef7330 RCX: 00007f309be71a09 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffffffffffc0 R09: 00007f309bef1e40 R10: 0000000000010600 R11: 0000000000000246 R12: 00007f309bef7330 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:f2fs_evict_inode+0x172d/0x1e00 fs/f2fs/inode.c:869 Code: ff df 48 c1 ea 03 80 3c 02 00 0f 85 6a 06 00 00 8b 75 40 ba 01 00 00 00 4c 89 e7 e8 6d ce 06 00 e9 aa fc ff ff e8 63 22 e2 fd <0f> 0b e8 5c 22 e2 fd 48 c7 c0 a8 3a 18 8d 48 ba 00 00 00 00 00 fc RSP: 0018:ffffc90003a6fa00 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff8880273b8000 RSI: ffffffff83a2bd0d RDI: 0000000000000007 RBP: ffff888077db91b0 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888029a3c000 R13: ffff888077db9660 R14: ffff888029a3c0b8 R15: ffff888077db9c50 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1909bb9000 CR3: 00000000276a9000 CR4: 0000000000350ef0 Cc: <[email protected]> Reported-and-tested-by: [email protected] Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 5c13e23 upstream. ====================================================== WARNING: possible circular locking dependency detected 6.5.0-rc5-syzkaller-00353-gae545c3283dc #0 Not tainted ------------------------------------------------------ syz-executor273/5027 is trying to acquire lock: ffff888077fe1fb0 (&fi->i_sem){+.+.}-{3:3}, at: f2fs_down_write fs/f2fs/f2fs.h:2133 [inline] ffff888077fe1fb0 (&fi->i_sem){+.+.}-{3:3}, at: f2fs_add_inline_entry+0x300/0x6f0 fs/f2fs/inline.c:644 but task is already holding lock: ffff888077fe07c8 (&fi->i_xattr_sem){.+.+}-{3:3}, at: f2fs_down_read fs/f2fs/f2fs.h:2108 [inline] ffff888077fe07c8 (&fi->i_xattr_sem){.+.+}-{3:3}, at: f2fs_add_dentry+0x92/0x230 fs/f2fs/dir.c:783 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&fi->i_xattr_sem){.+.+}-{3:3}: down_read+0x9c/0x470 kernel/locking/rwsem.c:1520 f2fs_down_read fs/f2fs/f2fs.h:2108 [inline] f2fs_getxattr+0xb1e/0x12c0 fs/f2fs/xattr.c:532 __f2fs_get_acl+0x5a/0x900 fs/f2fs/acl.c:179 f2fs_acl_create fs/f2fs/acl.c:377 [inline] f2fs_init_acl+0x15c/0xb30 fs/f2fs/acl.c:420 f2fs_init_inode_metadata+0x159/0x1290 fs/f2fs/dir.c:558 f2fs_add_regular_entry+0x79e/0xb90 fs/f2fs/dir.c:740 f2fs_add_dentry+0x1de/0x230 fs/f2fs/dir.c:788 f2fs_do_add_link+0x190/0x280 fs/f2fs/dir.c:827 f2fs_add_link fs/f2fs/f2fs.h:3554 [inline] f2fs_mkdir+0x377/0x620 fs/f2fs/namei.c:781 vfs_mkdir+0x532/0x7e0 fs/namei.c:4117 do_mkdirat+0x2a9/0x330 fs/namei.c:4140 __do_sys_mkdir fs/namei.c:4160 [inline] __se_sys_mkdir fs/namei.c:4158 [inline] __x64_sys_mkdir+0xf2/0x140 fs/namei.c:4158 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (&fi->i_sem){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x2e3d/0x5de0 kernel/locking/lockdep.c:5144 lock_acquire kernel/locking/lockdep.c:5761 [inline] lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726 down_write+0x93/0x200 kernel/locking/rwsem.c:1573 f2fs_down_write fs/f2fs/f2fs.h:2133 [inline] f2fs_add_inline_entry+0x300/0x6f0 fs/f2fs/inline.c:644 f2fs_add_dentry+0xa6/0x230 fs/f2fs/dir.c:784 f2fs_do_add_link+0x190/0x280 fs/f2fs/dir.c:827 f2fs_add_link fs/f2fs/f2fs.h:3554 [inline] f2fs_mkdir+0x377/0x620 fs/f2fs/namei.c:781 vfs_mkdir+0x532/0x7e0 fs/namei.c:4117 ovl_do_mkdir fs/overlayfs/overlayfs.h:196 [inline] ovl_mkdir_real+0xb5/0x370 fs/overlayfs/dir.c:146 ovl_workdir_create+0x3de/0x820 fs/overlayfs/super.c:309 ovl_make_workdir fs/overlayfs/super.c:711 [inline] ovl_get_workdir fs/overlayfs/super.c:864 [inline] ovl_fill_super+0xdab/0x6180 fs/overlayfs/super.c:1400 vfs_get_super+0xf9/0x290 fs/super.c:1152 vfs_get_tree+0x88/0x350 fs/super.c:1519 do_new_mount fs/namespace.c:3335 [inline] path_mount+0x1492/0x1ed0 fs/namespace.c:3662 do_mount fs/namespace.c:3675 [inline] __do_sys_mount fs/namespace.c:3884 [inline] __se_sys_mount fs/namespace.c:3861 [inline] __x64_sys_mount+0x293/0x310 fs/namespace.c:3861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- rlock(&fi->i_xattr_sem); lock(&fi->i_sem); lock(&fi->i_xattr_sem); lock(&fi->i_sem); Cc: <[email protected]> Reported-and-tested-by: [email protected] Fixes: 5eda1ad "f2fs: fix deadlock in i_xattr_sem and inode page lock" Tested-by: Guenter Roeck <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 6f0df8e upstream. In the eviction recency check, we attempt to retrieve the memcg to which the folio belonged when it was evicted, by the memcg id stored in the shadow entry. However, there is a chance that the retrieved memcg is not the original memcg that has been killed, but a new one which happens to have the same id. This is a somewhat unfortunate, but acceptable and rare inaccuracy in the heuristics. However, if we retrieve this new memcg between its allocation and when it is properly attached to the memcg hierarchy, we could run into the following NULL pointer exception during the memcg hierarchy traversal done in mem_cgroup_get_nr_swap_pages(): [ 155757.793456] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 155757.807568] #PF: supervisor read access in kernel mode [ 155757.818024] #PF: error_code(0x0000) - not-present page [ 155757.828482] PGD 401f77067 P4D 401f77067 PUD 401f76067 PMD 0 [ 155757.839985] Oops: 0000 [#1] SMP [ 155757.887870] RIP: 0010:mem_cgroup_get_nr_swap_pages+0x3d/0xb0 [ 155757.899377] Code: 29 19 4a 02 48 39 f9 74 63 48 8b 97 c0 00 00 00 48 8b b7 58 02 00 00 48 2b b7 c0 01 00 00 48 39 f0 48 0f 4d c6 48 39 d1 74 42 <48> 8b b2 c0 00 00 00 48 8b ba 58 02 00 00 48 2b ba c0 01 00 00 48 [ 155757.937125] RSP: 0018:ffffc9002ecdfbc8 EFLAGS: 00010286 [ 155757.947755] RAX: 00000000003a3b1c RBX: 000007ffffffffff RCX: ffff888280183000 [ 155757.962202] RDX: 0000000000000000 RSI: 0007ffffffffffff RDI: ffff888bbc2d1000 [ 155757.976648] RBP: 0000000000000001 R08: 000000000000000b R09: ffff888ad9cedba0 [ 155757.991094] R10: ffffea0039c07900 R11: 0000000000000010 R12: ffff888b23a7b000 [ 155758.005540] R13: 0000000000000000 R14: ffff888bbc2d1000 R15: 000007ffffc71354 [ 155758.019991] FS: 00007f6234c68640(0000) GS:ffff88903f9c0000(0000) knlGS:0000000000000000 [ 155758.036356] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 155758.048023] CR2: 00000000000000c0 CR3: 0000000a83eb8004 CR4: 00000000007706e0 [ 155758.062473] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 155758.076924] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 155758.091376] PKRU: 55555554 [ 155758.096957] Call Trace: [ 155758.102016] <TASK> [ 155758.106502] ? __die+0x78/0xc0 [ 155758.112793] ? page_fault_oops+0x286/0x380 [ 155758.121175] ? exc_page_fault+0x5d/0x110 [ 155758.129209] ? asm_exc_page_fault+0x22/0x30 [ 155758.137763] ? mem_cgroup_get_nr_swap_pages+0x3d/0xb0 [ 155758.148060] workingset_test_recent+0xda/0x1b0 [ 155758.157133] workingset_refault+0xca/0x1e0 [ 155758.165508] filemap_add_folio+0x4d/0x70 [ 155758.173538] page_cache_ra_unbounded+0xed/0x190 [ 155758.182919] page_cache_sync_ra+0xd6/0x1e0 [ 155758.191738] filemap_read+0x68d/0xdf0 [ 155758.199495] ? mlx5e_napi_poll+0x123/0x940 [ 155758.207981] ? __napi_schedule+0x55/0x90 [ 155758.216095] __x64_sys_pread64+0x1d6/0x2c0 [ 155758.224601] do_syscall_64+0x3d/0x80 [ 155758.232058] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 155758.242473] RIP: 0033:0x7f62c29153b5 [ 155758.249938] Code: e8 48 89 75 f0 89 7d f8 48 89 4d e0 e8 b4 e6 f7 ff 41 89 c0 4c 8b 55 e0 48 8b 55 e8 48 8b 75 f0 8b 7d f8 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 45 f8 e8 e7 e6 f7 ff 48 8b [ 155758.288005] RSP: 002b:00007f6234c5ffd0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 [ 155758.303474] RAX: ffffffffffffffda RBX: 00007f628c4e70c0 RCX: 00007f62c29153b5 [ 155758.318075] RDX: 000000000003c041 RSI: 00007f61d2986000 RDI: 0000000000000076 [ 155758.332678] RBP: 00007f6234c5fff0 R08: 0000000000000000 R09: 0000000064d5230c [ 155758.347452] R10: 000000000027d450 R11: 0000000000000293 R12: 000000000003c041 [ 155758.362044] R13: 00007f61d2986000 R14: 00007f629e11b060 R15: 000000000027d450 [ 155758.376661] </TASK> This patch fixes the issue by moving the memcg's id publication from the alloc stage to online stage, ensuring that any memcg acquired via id must be connected to the memcg tree. Link: https://lkml.kernel.org/r/[email protected] Fixes: f78dfc7 ("workingset: fix confusion around eviction vs refault container") Signed-off-by: Johannes Weiner <[email protected]> Co-developed-by: Nhat Pham <[email protected]> Signed-off-by: Nhat Pham <[email protected]> Acked-by: Shakeel Butt <[email protected]> Cc: Yosry Ahmed <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Roman Gushchin <[email protected]> Cc: Muchun Song <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit e7f1326 upstream. One of the CI runs triggered the following panic assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229 ------------[ cut here ]------------ kernel BUG at fs/btrfs/subpage.c:229! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 0 PID: 923660 Comm: btrfs Not tainted 6.5.0-rc3+ #1 pstate: 6140000 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_subpage_assert+0xbc/0xf0 lr : btrfs_subpage_assert+0xbc/0xf0 sp : ffff800093213720 x29: ffff800093213720 x28: ffff8000932138b4 x27: 000000000c280000 x26: 00000001b5d00000 x25: 000000000c281000 x24: 000000000c281fff x23: 0000000000001000 x22: 0000000000000000 x21: ffffff42b95bf880 x20: ffff42b9528e0000 x19: 0000000000001000 x18: ffffffffffffffff x17: 667274622f736620 x16: 6e69202c65746176 x15: 0000000000000028 x14: 0000000000000003 x13: 00000000002672d7 x12: 0000000000000000 x11: ffffcd3f0ccd9204 x10: ffffcd3f0554ae50 x9 : ffffcd3f0379528c x8 : ffff800093213428 x7 : 0000000000000000 x6 : ffffcd3f091771e8 x5 : ffff42b97f333948 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff42b9556cde80 x0 : 000000000000004f Call trace: btrfs_subpage_assert+0xbc/0xf0 btrfs_subpage_set_dirty+0x38/0xa0 btrfs_page_set_dirty+0x58/0x88 relocate_one_page+0x204/0x5f0 relocate_file_extent_cluster+0x11c/0x180 relocate_data_extent+0xd0/0xf8 relocate_block_group+0x3d0/0x4e8 btrfs_relocate_block_group+0x2d8/0x490 btrfs_relocate_chunk+0x54/0x1a8 btrfs_balance+0x7f4/0x1150 btrfs_ioctl+0x10f0/0x20b8 __arm64_sys_ioctl+0x120/0x11d8 invoke_syscall.constprop.0+0x80/0xd8 do_el0_svc+0x6c/0x158 el0_svc+0x50/0x1b0 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x194/0x198 Code: 91098021 b0007fa0 91346000 97e9c6d2 (d4210000) This is the same problem outlined in 17b17fc ("btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand") , and the fix is the same. I originally looked for the same pattern elsewhere in our code, but mistakenly skipped over this code because I saw the page cache readahead before we set_page_extent_mapped, not realizing that this was only in the !page case, that we can still end up with a !uptodate page and then do the btrfs_read_folio further down. The fix here is the same as the above mentioned patch, move the set_page_extent_mapped call to after the btrfs_read_folio() block to make sure that we have the subpage blocksize stuff setup properly before using the page. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit f1187ef upstream. Fix a goof where KVM tries to grab source vCPUs from the destination VM when doing intrahost migration. Grabbing the wrong vCPU not only hoses the guest, it also crashes the host due to the VMSA pointer being left NULL. BUG: unable to handle page fault for address: ffffe38687000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 39 PID: 17143 Comm: sev_migrate_tes Tainted: GO 6.5.0-smp--fff2e47e6c3b-next torvalds#151 Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.28.0 07/10/2023 RIP: 0010:__free_pages+0x15/0xd0 RSP: 0018:ffff923fcf6e3c78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffe38687000000 RCX: 0000000000000100 RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffe38687000000 RBP: ffff923fcf6e3c88 R08: ffff923fcafb0000 R09: 0000000000000000 R10: 0000000000000000 R11: ffffffff83619b90 R12: ffff923fa9540000 R13: 0000000000080007 R14: ffff923f6d35d000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff929d0d7c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffe38687000000 CR3: 0000005224c34005 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> sev_free_vcpu+0xcb/0x110 [kvm_amd] svm_vcpu_free+0x75/0xf0 [kvm_amd] kvm_arch_vcpu_destroy+0x36/0x140 [kvm] kvm_destroy_vcpus+0x67/0x100 [kvm] kvm_arch_destroy_vm+0x161/0x1d0 [kvm] kvm_put_kvm+0x276/0x560 [kvm] kvm_vm_release+0x25/0x30 [kvm] __fput+0x106/0x280 ____fput+0x12/0x20 task_work_run+0x86/0xb0 do_exit+0x2e3/0x9c0 do_group_exit+0xb1/0xc0 __x64_sys_exit_group+0x1b/0x20 do_syscall_64+0x41/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> CR2: ffffe38687000000 Fixes: 6defa24 ("KVM: SEV: Init target VMCBs in sev_migrate_from") Cc: [email protected] Cc: Peter Gonda <[email protected]> Reviewed-by: Peter Gonda <[email protected]> Reviewed-by: Pankaj Gupta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 2810c1e ] Inject fault while probing kunit-example-test.ko, if kstrdup() fails in mod_sysfs_setup() in load_module(), the mod->state will switch from MODULE_STATE_COMING to MODULE_STATE_GOING instead of from MODULE_STATE_LIVE to MODULE_STATE_GOING, so only kunit_module_exit() will be called without kunit_module_init(), and the mod->kunit_suites is no set correctly and the free in kunit_free_suite_set() will cause below wild-memory-access bug. The mod->state state machine when load_module() succeeds: MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_LIVE ^ | | | delete_module +---------------- MODULE_STATE_GOING <---------+ The mod->state state machine when load_module() fails at mod_sysfs_setup(): MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_GOING ^ | | | +-----------------------------------------------+ Call kunit_module_init() at MODULE_STATE_COMING state to fix the issue because MODULE_STATE_LIVE is transformed from it. Unable to handle kernel paging request at virtual address ffffff341e942a88 KASAN: maybe wild-memory-access in range [0x0003f9a0f4a15440-0x0003f9a0f4a15447] Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000441ea000 [ffffff341e942a88] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: kunit_example_test(-) cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: kunit_example_test] CPU: 3 PID: 2035 Comm: modprobe Tainted: G W N 6.5.0-next-20230828+ torvalds#136 Hardware name: linux,dummy-virt (DT) pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kfree+0x2c/0x70 lr : kunit_free_suite_set+0xcc/0x13c sp : ffff8000829b75b0 x29: ffff8000829b75b0 x28: ffff8000829b7b90 x27: 0000000000000000 x26: dfff800000000000 x25: ffffcd07c82a7280 x24: ffffcd07a50ab300 x23: ffffcd07a50ab2e8 x22: 1ffff00010536ec0 x21: dfff800000000000 x20: ffffcd07a50ab2f0 x19: ffffcd07a50ab2f0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffffcd07c24b6764 x14: ffffcd07c24b63c0 x13: ffffcd07c4cebb94 x12: ffff700010536ec7 x11: 1ffff00010536ec6 x10: ffff700010536ec6 x9 : dfff800000000000 x8 : 00008fffefac913a x7 : 0000000041b58ab3 x6 : 0000000000000000 x5 : 1ffff00010536ec5 x4 : ffff8000829b7628 x3 : dfff800000000000 x2 : ffffff341e942a80 x1 : ffffcd07a50aa000 x0 : fffffc0000000000 Call trace: kfree+0x2c/0x70 kunit_free_suite_set+0xcc/0x13c kunit_module_notify+0xd8/0x360 blocking_notifier_call_chain+0xc4/0x128 load_module+0x382c/0x44a4 init_module_from_file+0xd4/0x128 idempotent_init_module+0x2c8/0x524 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x38/0x78 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: aa0003e1 b25657e0 d34cfc42 8b021802 (f9400440) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: 0x4d0742200000 from 0xffff800080000000 PHYS_OFFSET: 0xffffee43c0000000 CPU features: 0x88000203,3c020000,1000421b Memory Limit: none Rebooting in 1 seconds.. Fixes: 3d6e446 ("kunit: unify module and builtin suite definitions") Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: Rae Moar <[email protected]> Reviewed-by: David Gow <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…n smcr_port_add [ Upstream commit f5146e3 ] While doing smcr_port_add, there maybe linkgroup add into or delete from smc_lgr_list.list at the same time, which may result kernel crash. So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add. The crash calltrace show below: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 559726 Comm: kworker/0:92 Kdump: loaded Tainted: G Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 449e491 04/01/2014 Workqueue: events smc_ib_port_event_work [smc] RIP: 0010:smcr_port_add+0xa6/0xf0 [smc] RSP: 0000:ffffa5a2c8f67de0 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffff9935e0650000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff9935e0654290 RDI: ffff9935c8560000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9934c0401918 R10: 0000000000000000 R11: ffffffffb4a5c278 R12: ffff99364029aae4 R13: ffff99364029aa00 R14: 00000000ffffffed R15: ffff99364029ab08 FS: 0000000000000000(0000) GS:ffff994380600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000f06a10003 CR4: 0000000002770ef0 PKRU: 55555554 Call Trace: smc_ib_port_event_work+0x18f/0x380 [smc] process_one_work+0x19b/0x340 worker_thread+0x30/0x370 ? process_one_work+0x340/0x340 kthread+0x114/0x130 ? __kthread_cancel_work+0x50/0x50 ret_from_fork+0x1f/0x30 Fixes: 1f90a05 ("net/smc: add smcr_port_add() and smcr_link_up() processing") Signed-off-by: Guangguan Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 403f0e7 ] macb_set_tx_clk() is called under a spinlock but itself calls clk_set_rate() which can sleep. This results in: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 | pps pps1: new PPS source ptp1 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 40, name: kworker/u4:3 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | 4 locks held by kworker/u4:3/40: | #0: ffff000003409148 | macb ff0c000.ethernet: gem-ptp-timer ptp clock registered. | ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #1: ffff8000833cbdd8 ((work_completion)(&pl->resolve)){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #2: ffff000004f01578 (&pl->state_mutex){+.+.}-{4:4}, at: phylink_resolve+0x44/0x4e8 | #3: ffff000004f06f50 (&bp->lock){....}-{3:3}, at: macb_mac_link_up+0x40/0x2ac | irq event stamp: 113998 | hardirqs last enabled at (113997): [<ffff800080e8503c>] _raw_spin_unlock_irq+0x30/0x64 | hardirqs last disabled at (113998): [<ffff800080e84478>] _raw_spin_lock_irqsave+0xac/0xc8 | softirqs last enabled at (113608): [<ffff800080010630>] __do_softirq+0x430/0x4e4 | softirqs last disabled at (113597): [<ffff80008001614c>] ____do_softirq+0x10/0x1c | CPU: 0 PID: 40 Comm: kworker/u4:3 Not tainted 6.5.0-11717-g9355ce8b2f50-dirty torvalds#368 | Hardware name: ... ZynqMP ... (DT) | Workqueue: events_power_efficient phylink_resolve | Call trace: | dump_backtrace+0x98/0xf0 | show_stack+0x18/0x24 | dump_stack_lvl+0x60/0xac | dump_stack+0x18/0x24 | __might_resched+0x144/0x24c | __might_sleep+0x48/0x98 | __mutex_lock+0x58/0x7b0 | mutex_lock_nested+0x24/0x30 | clk_prepare_lock+0x4c/0xa8 | clk_set_rate+0x24/0x8c | macb_mac_link_up+0x25c/0x2ac | phylink_resolve+0x178/0x4e8 | process_one_work+0x1ec/0x51c | worker_thread+0x1ec/0x3e4 | kthread+0x120/0x124 | ret_from_fork+0x10/0x20 The obvious fix is to move the call to macb_set_tx_clk() out of the protected area. This seems safe as rx and tx are both disabled anyway at this point. It is however not entirely clear what the spinlock shall protect. It could be the read-modify-write access to the NCFGR register, but this is accessed in macb_set_rx_mode() and macb_set_rxcsum_feature() as well without holding the spinlock. It could also be the register accesses done in mog_init_rings() or macb_init_buffers(), but again these functions are called without holding the spinlock in macb_hresp_error_task(). The locking seems fishy in this driver and it might deserve another look before this patch is applied. Fixes: 633e98a ("net: macb: use resolved link config in mac_link_up()") Signed-off-by: Sascha Hauer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 910e230 ] Macro symbol_put() is defined as __symbol_put(__stringify(x)) ksym_name = "jiffies" symbol_put(ksym_name) will be resolved as __symbol_put("ksym_name") which is clearly wrong. So symbol_put must be replaced with __symbol_put. When we uninstall hw_breakpoint.ko (rmmod), a kernel bug occurs with the following error: [11381.854152] kernel BUG at kernel/module/main.c:779! [11381.854159] invalid opcode: 0000 [#2] PREEMPT SMP PTI [11381.854163] CPU: 8 PID: 59623 Comm: rmmod Tainted: G D OE 6.2.9-200.fc37.x86_64 #1 [11381.854167] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B360M-HDV, BIOS P3.20 10/23/2018 [11381.854169] RIP: 0010:__symbol_put+0xa2/0xb0 [11381.854175] Code: 00 e8 92 d2 f7 ff 65 8b 05 c3 2f e6 78 85 c0 74 1b 48 8b 44 24 30 65 48 2b 04 25 28 00 00 00 75 12 48 83 c4 38 c3 cc cc cc cc <0f> 0b 0f 1f 44 00 00 eb de e8 c0 df d8 00 90 90 90 90 90 90 90 90 [11381.854178] RSP: 0018:ffffad8ec6ae7dd0 EFLAGS: 00010246 [11381.854181] RAX: 0000000000000000 RBX: ffffffffc1fd1240 RCX: 000000000000000c [11381.854184] RDX: 000000000000006b RSI: ffffffffc02bf7c7 RDI: ffffffffc1fd001c [11381.854186] RBP: 000055a38b76e7c8 R08: ffffffff871ccfe0 R09: 0000000000000000 [11381.854188] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [11381.854190] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [11381.854192] FS: 00007fbf7c62c740(0000) GS:ffff8c5badc00000(0000) knlGS:0000000000000000 [11381.854195] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11381.854197] CR2: 000055a38b7793f8 CR3: 0000000363e1e001 CR4: 00000000003726e0 [11381.854200] DR0: ffffffffb3407980 DR1: 0000000000000000 DR2: 0000000000000000 [11381.854202] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [11381.854204] Call Trace: [11381.854207] <TASK> [11381.854212] s_module_exit+0xc/0xff0 [symbol_getput] [11381.854219] __do_sys_delete_module.constprop.0+0x198/0x2f0 [11381.854225] do_syscall_64+0x58/0x80 [11381.854231] ? exit_to_user_mode_prepare+0x180/0x1f0 [11381.854237] ? syscall_exit_to_user_mode+0x17/0x40 [11381.854241] ? do_syscall_64+0x67/0x80 [11381.854245] ? syscall_exit_to_user_mode+0x17/0x40 [11381.854248] ? do_syscall_64+0x67/0x80 [11381.854252] ? exc_page_fault+0x70/0x170 [11381.854256] entry_SYSCALL_64_after_hwframe+0x72/0xdc Signed-off-by: Rong Tao <[email protected]> Reviewed-by: Petr Mladek <[email protected]> Signed-off-by: Luis Chamberlain <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b97f96e ] When compiling the kernel with clang and having HARDENED_USERCOPY enabled, the liburing openat2.t test case fails during request setup: usercopy: Kernel memory overwrite attempt detected to SLUB object 'io_kiocb' (offset 24, size 24)! ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:102! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU: 3 PID: 413 Comm: openat2.t Tainted: G N 6.4.3-g6995e2de6891-dirty torvalds#19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 RIP: 0010:usercopy_abort+0x84/0x90 Code: ce 49 89 ce 48 c7 c3 68 48 98 82 48 0f 44 de 48 c7 c7 56 c6 94 82 4c 89 de 48 89 c1 41 52 41 56 53 e8 e0 51 c5 00 48 83 c4 18 <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 41 57 41 56 RSP: 0018:ffffc900016b3da0 EFLAGS: 00010296 RAX: 0000000000000062 RBX: ffffffff82984868 RCX: 4e9b661ac6275b00 RDX: ffff8881b90ec580 RSI: ffffffff82949a64 RDI: 00000000ffffffff RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc900016b3c88 R11: ffffc900016b3c30 R12: 00007ffe549659e0 R13: ffff888119014000 R14: 0000000000000018 R15: 0000000000000018 FS: 00007f862e3ca680(0000) GS:ffff8881b90c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005571483542a8 CR3: 0000000118c11000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die_body+0x63/0xb0 ? die+0x9d/0xc0 ? do_trap+0xa7/0x180 ? usercopy_abort+0x84/0x90 ? do_error_trap+0xc6/0x110 ? usercopy_abort+0x84/0x90 ? handle_invalid_op+0x2c/0x40 ? usercopy_abort+0x84/0x90 ? exc_invalid_op+0x2f/0x40 ? asm_exc_invalid_op+0x16/0x20 ? usercopy_abort+0x84/0x90 __check_heap_object+0xe2/0x110 __check_object_size+0x142/0x3d0 io_openat2_prep+0x68/0x140 io_submit_sqes+0x28a/0x680 __se_sys_io_uring_enter+0x120/0x580 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x55714834de26 Code: ca 01 0f b6 82 d0 00 00 00 8b ba cc 00 00 00 45 31 c0 31 d2 41 b9 08 00 00 00 83 e0 01 c1 e0 04 41 09 c2 b8 aa 01 00 00 0f 05 <c3> 66 0f 1f 84 00 00 00 00 00 89 30 eb 89 0f 1f 40 00 8b 00 a8 06 RSP: 002b:00007ffe549659c8 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00007ffe54965a50 RCX: 000055714834de26 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000000 R11: 0000000000000246 R12: 000055714834f057 R13: 00007ffe54965a50 R14: 0000000000000001 R15: 0000557148351dd8 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- when it tries to copy struct open_how from userspace into the per-command space in the io_kiocb. There's nothing wrong with the copy, but we're missing the appropriate annotations for allowing user copies to/from the io_kiocb slab. Allow copies in the per-command area, which is from the 'file' pointer to when 'opcode' starts. We do have existing user copies there, but they are not all annotated like the one that openat2_prep() uses, copy_struct_from_user(). But in practice opcodes should be allowed to copy data into their per-command area in the io_kiocb. Reported-by: Breno Leitao <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2319b9c ] The device may be scheduled during the resume process, so this cannot appear in atomic operations. Since pm_runtime_set_active will resume suppliers, put set active outside the spin lock, which is only used to protect the struct cdns data structure, otherwise the kernel will report the following warning: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1163 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 651, name: sh preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 PID: 651 Comm: sh Tainted: G WC 6.1.20 #1 Hardware name: Freescale i.MX8QM MEK (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x64/0x80 dump_stack+0x1c/0x38 __might_resched+0x1fc/0x240 __might_sleep+0x68/0xc0 __pm_runtime_resume+0x9c/0xe0 rpm_get_suppliers+0x68/0x1b0 __pm_runtime_set_status+0x298/0x560 cdns_resume+0xb0/0x1c0 cdns3_controller_resume.isra.0+0x1e0/0x250 cdns3_plat_resume+0x28/0x40 Signed-off-by: Xiaolei Wang <[email protected]> Acked-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit af42269 ] For cases where icc_bw_set() can be called in callbaths that could deadlock against shrinker/reclaim, such as runpm resume, we need to decouple the icc locking. Introduce a new icc_bw_lock for cases where we need to serialize bw aggregation and update to decouple that from paths that require memory allocation such as node/link creation/ destruction. Fixes this lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.2.0-rc8-debug+ torvalds#554 Not tainted ------------------------------------------------------ ring0/132 is trying to acquire lock: ffffff80871916d0 (&gmu->lock){+.+.}-{3:3}, at: a6xx_pm_resume+0xf0/0x234 but task is already holding lock: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (dma_fence_map){++++}-{0:0}: __dma_fence_might_wait+0x74/0xc0 dma_resv_lockdep+0x1f4/0x2f4 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x80/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 topology_parse_cpu_capacity+0x8c/0x178 get_cpu_for_node+0x88/0xc4 parse_cluster+0x1b0/0x28c parse_cluster+0x8c/0x28c init_cpu_topology+0x168/0x188 smp_prepare_cpus+0x24/0xf8 kernel_init_freeable+0x18c/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #2 (fs_reclaim){+.+.}-{0:0}: __fs_reclaim_acquire+0x3c/0x48 fs_reclaim_acquire+0x54/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 kzalloc.constprop.0+0x14/0x20 icc_node_create_nolock+0x4c/0xc4 icc_node_create+0x38/0x58 qcom_icc_rpmh_probe+0x1b8/0x248 platform_probe+0x70/0xc4 really_probe+0x158/0x290 __driver_probe_device+0xc8/0xe0 driver_probe_device+0x44/0x100 __driver_attach+0xf8/0x108 bus_for_each_dev+0x78/0xc4 driver_attach+0x2c/0x38 bus_add_driver+0xd0/0x1d8 driver_register+0xbc/0xf8 __platform_driver_register+0x30/0x3c qnoc_driver_init+0x24/0x30 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #1 (icc_lock){+.+.}-{3:3}: __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 icc_set_bw+0x88/0x2b4 _set_opp_bw+0x8c/0xd8 _set_opp+0x19c/0x300 dev_pm_opp_set_opp+0x84/0x94 a6xx_gmu_resume+0x18c/0x804 a6xx_pm_resume+0xf8/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc adreno_load_gpu+0xc4/0x17c msm_open+0x50/0x120 drm_file_alloc+0x17c/0x228 drm_open_helper+0x74/0x118 drm_open+0xa0/0x144 drm_stub_open+0xd4/0xe4 chrdev_open+0x1b8/0x1e4 do_dentry_open+0x2f8/0x38c vfs_open+0x34/0x40 path_openat+0x64c/0x7b4 do_filp_open+0x54/0xc4 do_sys_openat2+0x9c/0x100 do_sys_open+0x50/0x7c __arm64_sys_openat+0x28/0x34 invoke_syscall+0x8c/0x128 el0_svc_common.constprop.0+0xa0/0x11c do_el0_svc+0xac/0xbc el0_svc+0x48/0xa0 el0t_64_sync_handler+0xac/0x13c el0t_64_sync+0x190/0x194 -> #0 (&gmu->lock){+.+.}-{3:3}: __lock_acquire+0xe00/0x1060 lock_acquire+0x1e0/0x2f8 __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 a6xx_pm_resume+0xf0/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc pm_runtime_get_sync.isra.0+0x14/0x20 msm_gpu_submit+0x58/0x178 msm_job_run+0x78/0x150 drm_sched_main+0x290/0x370 kthread+0xf0/0x100 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: &gmu->lock --> mmu_notifier_invalidate_range_start --> dma_fence_map Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(dma_fence_map); lock(mmu_notifier_invalidate_range_start); lock(dma_fence_map); lock(&gmu->lock); *** DEADLOCK *** 2 locks held by ring0/132: #0: ffffff8087191170 (&gpu->lock){+.+.}-{3:3}, at: msm_job_run+0x64/0x150 #1: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150 stack backtrace: CPU: 7 PID: 132 Comm: ring0 Not tainted 6.2.0-rc8-debug+ torvalds#554 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Call trace: dump_backtrace.part.0+0xb4/0xf8 show_stack+0x20/0x38 dump_stack_lvl+0x9c/0xd0 dump_stack+0x18/0x34 print_circular_bug+0x1b4/0x1f0 check_noncircular+0x78/0xac __lock_acquire+0xe00/0x1060 lock_acquire+0x1e0/0x2f8 __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 a6xx_pm_resume+0xf0/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc pm_runtime_get_sync.isra.0+0x14/0x20 msm_gpu_submit+0x58/0x178 msm_job_run+0x78/0x150 drm_sched_main+0x290/0x370 kthread+0xf0/0x100 ret_from_fork+0x10/0x20 Signed-off-by: Rob Clark <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit bc056e7 ] When we calculate the end position of ext4_free_extent, this position may be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not the first case of adjusting the best extent, that is, new_bex_end > 0, the following BUG_ON will be triggered: ========================================================= kernel BUG at fs/ext4/mballoc.c:5116! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ torvalds#279 RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430 Call Trace: <TASK> ext4_mb_use_best_found+0x203/0x2f0 ext4_mb_try_best_found+0x163/0x240 ext4_mb_regular_allocator+0x158/0x1550 ext4_mb_new_blocks+0x86a/0xe10 ext4_ext_map_blocks+0xb0c/0x13a0 ext4_map_blocks+0x2cd/0x8f0 ext4_iomap_begin+0x27b/0x400 iomap_iter+0x222/0x3d0 __iomap_dio_rw+0x243/0xcb0 iomap_dio_rw+0x16/0x80 ========================================================= A simple reproducer demonstrating the problem: mkfs.ext4 -F /dev/sda -b 4096 100M mount /dev/sda /tmp/test fallocate -l1M /tmp/test/tmp fallocate -l10M /tmp/test/file fallocate -i -o 1M -l16777203M /tmp/test/file fsstress -d /tmp/test -l 0 -n 100000 -p 8 & sleep 10 && killall -9 fsstress rm -f /tmp/test/tmp xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192" We simply refactor the logic for adjusting the best extent by adding a temporary ext4_free_extent ex and use extent_logical_end() to avoid overflow, which also simplifies the code. Cc: [email protected] # 6.4 Fixes: 93cdf49 ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()") Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Ritesh Harjani (IBM) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

… tree" commit 3c70de9 upstream. This reverts commit 06f4543. John Ogness reports the case that the allocation is in atomic context under acquired spin-lock. [ 12.555784] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306 [ 12.555808] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 70, name: kworker/1:2 [ 12.555814] preempt_count: 1, expected: 0 [ 12.555820] INFO: lockdep is turned off. [ 12.555824] irq event stamp: 208 [ 12.555828] hardirqs last enabled at (207): [<c00000000111e414>] ._raw_spin_unlock_irq+0x44/0x80 [ 12.555850] hardirqs last disabled at (208): [<c00000000110ff94>] .__schedule+0x854/0xfe0 [ 12.555859] softirqs last enabled at (188): [<c000000000f73504>] .addrconf_verify_rtnl+0x2c4/0xb70 [ 12.555872] softirqs last disabled at (182): [<c000000000f732b0>] .addrconf_verify_rtnl+0x70/0xb70 [ 12.555884] CPU: 1 PID: 70 Comm: kworker/1:2 Tainted: G S 6.6.0-rc1 #1 [ 12.555893] Hardware name: PowerMac7,2 PPC970 0x390202 PowerMac [ 12.555898] Workqueue: firewire_ohci .bus_reset_work [firewire_ohci] [ 12.555939] Call Trace: [ 12.555944] [c000000009677830] [c0000000010d83c0] .dump_stack_lvl+0x8c/0xd0 (unreliable) [ 12.555963] [c0000000096778b0] [c000000000140270] .__might_resched+0x320/0x340 [ 12.555978] [c000000009677940] [c000000000497600] .__kmem_cache_alloc_node+0x390/0x460 [ 12.555993] [c000000009677a10] [c0000000003fe620] .__kmalloc+0x70/0x310 [ 12.556007] [c000000009677ac0] [c0003d00004e2268] .fw_core_handle_bus_reset+0x2c8/0xba0 [firewire_core] [ 12.556060] [c000000009677c20] [c0003d0000491190] .bus_reset_work+0x330/0x9b0 [firewire_ohci] [ 12.556079] [c000000009677d10] [c00000000011d0d0] .process_one_work+0x280/0x6f0 [ 12.556094] [c000000009677e10] [c00000000011d8a0] .worker_thread+0x360/0x500 [ 12.556107] [c000000009677ef0] [c00000000012e3b4] .kthread+0x154/0x160 [ 12.556120] [c000000009677f90] [c00000000000bfa8] .start_kernel_thread+0x10/0x14 Cc: [email protected] Reported-by: John Ogness <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/raw Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 0a2c549 upstream. nvme_fc_delete_assocation() waits for pending I/O to complete before returning, and an error can cause ->ioerr_work to be queued after cancel_work_sync() had been called. Move the call to cancel_work_sync() to be after nvme_fc_delete_association() to ensure ->ioerr_work is not running when the nvme_fc_ctrl object is freed. Otherwise the following can occur: [ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL [ 1135.917705] ------------[ cut here ]------------ [ 1135.922336] kernel BUG at lib/list_debug.c:52! [ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary) [ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025 [ 1135.950969] Workqueue: 0x0 (nvme-wq) [ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f [ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b [ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046 [ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000 [ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0 [ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08 [ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100 [ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0 [ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000 [ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0 [ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 1136.055910] PKRU: 55555554 [ 1136.058623] Call Trace: [ 1136.061074] <TASK> [ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0 [ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0 [ 1136.071898] ? move_linked_works+0x4a/0xa0 [ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.081744] ? __die_body.cold+0x8/0x12 [ 1136.085584] ? die+0x2e/0x50 [ 1136.088469] ? do_trap+0xca/0x110 [ 1136.091789] ? do_error_trap+0x65/0x80 [ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.101289] ? exc_invalid_op+0x50/0x70 [ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20 [ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.120806] move_linked_works+0x4a/0xa0 [ 1136.124733] worker_thread+0x216/0x3a0 [ 1136.128485] ? __pfx_worker_thread+0x10/0x10 [ 1136.132758] kthread+0xfa/0x240 [ 1136.135904] ? __pfx_kthread+0x10/0x10 [ 1136.139657] ret_from_fork+0x31/0x50 [ 1136.143236] ? __pfx_kthread+0x10/0x10 [ 1136.146988] ret_from_fork_asm+0x1a/0x30 [ 1136.150915] </TASK> Fixes: 19fce04 ("nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context") Cc: [email protected] Tested-by: Marco Patalano <[email protected]> Reviewed-by: Justin Tee <[email protected]> Signed-off-by: Ewan D. Milne <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit e696518 upstream. If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and we attempt to dereference it in tcm_loop_tpg_address_show() we will get a segfault, see below for an example. So, check tl_hba->sh before dereferencing it. Unable to allocate struct scsi_host BUG: kernel NULL pointer dereference, address: 0000000000000194 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop] ... Call Trace: <TASK> configfs_read_iter+0x12d/0x1d0 [configfs] vfs_read+0x1b5/0x300 ksys_read+0x6f/0xf0 ... Cc: [email protected] Fixes: 2628b35 ("tcm_loop: Show address of tpg in configfs") Signed-off-by: Hamza Mahfooz <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Allen Pais <[email protected]> Link: https://patch.msgid.link/1762370746-6304-1-git-send-email-hamzamahfooz@linux.microsoft.com Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit dfe28c4 ] The validation of the set(nsh(...)) action is completely wrong. It runs through the nsh_key_put_from_nlattr() function that is the same function that validates NSH keys for the flow match and the push_nsh() action. However, the set(nsh(...)) has a very different memory layout. Nested attributes in there are doubled in size in case of the masked set(). That makes proper validation impossible. There is also confusion in the code between the 'masked' flag, that says that the nested attributes are doubled in size containing both the value and the mask, and the 'is_mask' that says that the value we're parsing is the mask. This is causing kernel crash on trying to write into mask part of the match with SW_FLOW_KEY_PUT() during validation, while validate_nsh() doesn't allocate any memory for it: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1c2383067 P4D 1c2383067 PUD 20b703067 PMD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 8 UID: 0 Kdump: loaded Not tainted 6.17.0-rc4+ torvalds#107 PREEMPT(voluntary) RIP: 0010:nsh_key_put_from_nlattr+0x19d/0x610 [openvswitch] Call Trace: <TASK> validate_nsh+0x60/0x90 [openvswitch] validate_set.constprop.0+0x270/0x3c0 [openvswitch] __ovs_nla_copy_actions+0x477/0x860 [openvswitch] ovs_nla_copy_actions+0x8d/0x100 [openvswitch] ovs_packet_cmd_execute+0x1cc/0x310 [openvswitch] genl_family_rcv_msg_doit+0xdb/0x130 genl_family_rcv_msg+0x14b/0x220 genl_rcv_msg+0x47/0xa0 netlink_rcv_skb+0x53/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x280/0x3b0 netlink_sendmsg+0x1f7/0x430 ____sys_sendmsg+0x36b/0x3a0 ___sys_sendmsg+0x87/0xd0 __sys_sendmsg+0x6d/0xd0 do_syscall_64+0x7b/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The third issue with this process is that while trying to convert the non-masked set into masked one, validate_set() copies and doubles the size of the OVS_KEY_ATTR_NSH as if it didn't have any nested attributes. It should be copying each nested attribute and doubling them in size independently. And the process must be properly reversed during the conversion back from masked to a non-masked variant during the flow dump. In the end, the only two outcomes of trying to use this action are either validation failure or a kernel crash. And if somehow someone manages to install a flow with such an action, it will most definitely not do what it is supposed to, since all the keys and the masks are mixed up. Fixing all the issues is a complex task as it requires re-writing most of the validation code. Given that and the fact that this functionality never worked since introduction, let's just remove it altogether. It's better to re-introduce it later with a proper implementation instead of trying to fix it in stable releases. Fixes: b2d0f5d ("openvswitch: enable NSH support") Reported-by: Junvy Yang <[email protected]> Signed-off-by: Ilya Maximets <[email protected]> Acked-by: Eelco Chaudron <[email protected]> Reviewed-by: Aaron Conole <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f94c1a1 ] The function devl_rate_nodes_destroy is documented to "Unset parent for all rate objects". However, it was only calling the driver-specific `rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing the parent's refcount, without actually setting the `devlink_rate->parent` pointer to NULL. This leaves a dangling pointer in the `devlink_rate` struct, which cause refcount error in netdevsim[1] and mlx5[2]. In addition, this is inconsistent with the behavior of `devlink_nl_rate_parent_node_set`, where the parent pointer is correctly cleared. This patch fixes the issue by explicitly setting `devlink_rate->parent` to NULL after notifying the driver, thus fulfilling the function's documented behavior for all rate objects. [1] repro steps: echo 1 > /sys/bus/netdevsim/new_device devlink dev eswitch set netdevsim/netdevsim1 mode switchdev echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs devlink port function rate add netdevsim/netdevsim1/test_node devlink port function rate set netdevsim/netdevsim1/128 parent test_node echo 1 > /sys/bus/netdevsim/del_device dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 __nsim_dev_port_del+0x6c/0x70 [netdevsim] nsim_dev_reload_destroy+0x11c/0x140 [netdevsim] nsim_drv_remove+0x2b/0xb0 [netdevsim] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xc6/0x130 device_del+0x159/0x3c0 device_unregister+0x1a/0x60 del_device_store+0x111/0x170 [netdevsim] kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x55/0x10f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] devlink dev eswitch set pci/0000:08:00.0 mode switchdev devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000 devlink port function rate add pci/0000:08:00.0/group1 devlink port function rate set pci/0000:08:00.0/32768 parent group1 modprobe -r mlx5_ib mlx5_fwctl mlx5_core dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core] mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core] mlx5_sf_esw_event+0xc4/0x120 [mlx5_core] notifier_call_chain+0x33/0xa0 blocking_notifier_call_chain+0x3b/0x50 mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core] mlx5_eswitch_disable+0x63/0x90 [mlx5_core] mlx5_unload+0x1d/0x170 [mlx5_core] mlx5_uninit_one+0xa2/0x130 [mlx5_core] remove_one+0x78/0xd0 [mlx5_core] pci_device_remove+0x39/0xa0 device_release_driver_internal+0x194/0x1f0 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x53/0x1f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: d755598 ("devlink: Allow setting parent node of rate objects") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Carolina Jubran <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d47515a ] The mlx5_irq_alloc() function can inadvertently free the entire rmap and end up in a crash[1] when the other threads tries to access this, when request_irq() fails due to exhausted IRQ vectors. This commit modifies the cleanup to remove only the specific IRQ mapping that was just added. This prevents removal of other valid mappings and ensures precise cleanup of the failed IRQ allocation's associated glue object. Note: This error is observed when both fwctl and rds configs are enabled. [1] mlx5_core 0000:05:00.0: Successfully registered panic handler for port 1 mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to request irq. err = -28 infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while trying to test write-combining support mlx5_core 0000:05:00.0: Successfully unregistered panic handler for port 1 mlx5_core 0000:06:00.0: Successfully registered panic handler for port 1 mlx5_core 0000:06:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to request irq. err = -28 infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while trying to test write-combining support mlx5_core 0000:06:00.0: Successfully unregistered panic handler for port 1 mlx5_core 0000:03:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to request irq. err = -28 mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to request irq. err = -28 general protection fault, probably for non-canonical address 0xe277a58fde16f291: 0000 [#1] SMP NOPTI RIP: 0010:free_irq_cpu_rmap+0x23/0x7d Call Trace: <TASK> ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core] ? __die_body.cold+0x8/0xa ? die_addr+0x39/0x53 ? exc_general_protection+0x1c4/0x3e9 ? dev_vprintk_emit+0x5f/0x90 ? asm_exc_general_protection+0x22/0x27 ? free_irq_cpu_rmap+0x23/0x7d mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core] irq_pool_request_vector+0x7d/0x90 [mlx5_core] mlx5_irq_request+0x2e/0xe0 [mlx5_core] mlx5_irq_request_vector+0xad/0xf7 [mlx5_core] comp_irq_request_pci+0x64/0xf0 [mlx5_core] create_comp_eq+0x71/0x385 [mlx5_core] ? mlx5e_open_xdpsq+0x11c/0x230 [mlx5_core] mlx5_comp_eqn_get+0x72/0x90 [mlx5_core] ? xas_load+0x8/0x91 mlx5_comp_irqn_get+0x40/0x90 [mlx5_core] mlx5e_open_channel+0x7d/0x3c7 [mlx5_core] mlx5e_open_channels+0xad/0x250 [mlx5_core] mlx5e_open_locked+0x3e/0x110 [mlx5_core] mlx5e_open+0x23/0x70 [mlx5_core] __dev_open+0xf1/0x1a5 __dev_change_flags+0x1e1/0x249 dev_change_flags+0x21/0x5c do_setlink+0x28b/0xcc4 ? __nla_parse+0x22/0x3d ? inet6_validate_link_af+0x6b/0x108 ? cpumask_next+0x1f/0x35 ? __snmp6_fill_stats64.constprop.0+0x66/0x107 ? __nla_validate_parse+0x48/0x1e6 __rtnl_newlink+0x5ff/0xa57 ? kmem_cache_alloc_trace+0x164/0x2ce rtnl_newlink+0x44/0x6e rtnetlink_rcv_msg+0x2bb/0x362 ? __netlink_sendskb+0x4c/0x6c ? netlink_unicast+0x28f/0x2ce ? rtnl_calcit.isra.0+0x150/0x146 netlink_rcv_skb+0x5f/0x112 netlink_unicast+0x213/0x2ce netlink_sendmsg+0x24f/0x4d9 __sock_sendmsg+0x65/0x6a ____sys_sendmsg+0x28f/0x2c9 ? import_iovec+0x17/0x2b ___sys_sendmsg+0x97/0xe0 __sys_sendmsg+0x81/0xd8 do_syscall_64+0x35/0x87 entry_SYSCALL_64_after_hwframe+0x6e/0x0 RIP: 0033:0x7fc328603727 Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48 RSP: 002b:00007ffe8eb3f1a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc328603727 RDX: 0000000000000000 RSI: 00007ffe8eb3f1f0 RDI: 000000000000000d RBP: 00007ffe8eb3f1f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 0000000000000000 R14: 00007ffe8eb3f3c8 R15: 00007ffe8eb3f3bc </TASK> ---[ end trace f43ce73c3c2b13a2 ]--- RIP: 0010:free_irq_cpu_rmap+0x23/0x7d Code: 0f 1f 80 00 00 00 00 48 85 ff 74 6b 55 48 89 fd 53 66 83 7f 06 00 74 24 31 db 48 8b 55 08 0f b7 c3 48 8b 04 c2 48 85 c0 74 09 <8b> 38 31 f6 e8 c4 0a b8 ff 83 c3 01 66 3b 5d 06 72 de b8 ff ff ff RSP: 0018:ff384881640eaca0 EFLAGS: 00010282 RAX: e277a58fde16f291 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ff2335e2e20b3600 RSI: 0000000000000000 RDI: ff2335e2e20b3400 RBP: ff2335e2e20b3400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000ffffffe4 R12: ff384881640ead88 R13: ff2335c3760751e0 R14: ff2335e2e1672200 R15: ff2335c3760751f8 FS: 00007fc32ac22480(0000) GS:ff2335e2d6e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f651ab54000 CR3: 00000029f1206003 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1dc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) kvm-guest: disable async PF for cpu 0 Fixes: 3354822 ("net/mlx5: Use dynamic msix vectors allocation") Signed-off-by: Mohith Kumar Thummaluru<[email protected]> Tested-by: Mohith Kumar Thummaluru<[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Reviewed-by: Shay Drori <[email protected]> Signed-off-by: Pradyumn Rahar <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 830d68f ] The following splat was reported: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000008d0fd8000 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP CPU: 5 UID: 1000 PID: 149076 Comm: Xwayland Tainted: G S 6.16.0-rc2-00809-g0b6974bb4134-dirty torvalds#367 PREEMPT Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Qualcomm Technologies, Inc. SM8650 HDK (DT) pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : build_detached_freelist+0x28/0x224 lr : kmem_cache_free_bulk.part.0+0x38/0x244 sp : ffff000a508c7a20 x29: ffff000a508c7a20 x28: ffff000a508c7d50 x27: ffffc4e49d16f350 x26: 0000000000000058 x25: 00000000fffffffc x24: 0000000000000000 x23: ffff00098c4e1450 x22: 00000000fffffffc x21: 0000000000000000 x20: ffff000a508c7af8 x19: 0000000000000002 x18: 00000000000003e8 x17: ffff000809523850 x16: ffff000809523820 x15: 0000000000401640 x14: ffff000809371140 x13: 0000000000000130 x12: ffff0008b5711e30 x11: 00000000001058fa x10: 0000000000000a80 x9 : ffff000a508c7940 x8 : ffff000809371ba0 x7 : 781fffe033087fff x6 : 0000000000000000 x5 : ffff0008003cd000 x4 : 781fffe033083fff x3 : ffff000a508c7af8 x2 : fffffdffc0000000 x1 : 0001000000000000 x0 : ffff0008001a6a00 Call trace: build_detached_freelist+0x28/0x224 (P) kmem_cache_free_bulk.part.0+0x38/0x244 kmem_cache_free_bulk+0x10/0x1c msm_iommu_pagetable_prealloc_cleanup+0x3c/0xd0 msm_vma_job_free+0x30/0x240 msm_ioctl_vm_bind+0x1d0/0x9a0 drm_ioctl_kernel+0x84/0x104 drm_ioctl+0x358/0x4d4 __arm64_sys_ioctl+0x8c/0xe0 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x3c/0xe0 do_el0_svc+0x18/0x20 el0_svc+0x30/0x100 el0t_64_sync_handler+0x104/0x130 el0t_64_sync+0x170/0x174 Code: aa0203f5 b26287e2 f2dfbfe2 aa0303f4 (f8737ab6) ---[ end trace 0000000000000000 ]--- Since msm_vma_job_free() is called directly from the ioctl, this looks like an error path cleanup issue. Which I think results from prealloc_cleanup() called without a preceding successful prealloc_allocate() call. So handle that case better. Reported-by: Connor Abbott <[email protected]> Signed-off-by: Rob Clark <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/678677/ Message-ID: <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

… NULL on error [ Upstream commit 90a8830 ] Make knav_dma_open_channel consistently return NULL on error instead of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h returns NULL when the driver is disabled, but the driver implementation does not even return NULL or ERR_PTR on failure, causing inconsistency in the users. This results in a crash in netcp_free_navigator_resources as followed (trimmed): Unhandled fault: alignment exception (0x221) at 0xfffffff2 [fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000 Internal error: : 221 [#1] SMP ARM Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE Hardware name: Keystone PC is at knav_dma_close_channel+0x30/0x19c LR is at netcp_free_navigator_resources+0x2c/0x28c [... TRIM...] Call trace: knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c netcp_ndo_open from __dev_open+0x114/0x29c __dev_open from __dev_change_flags+0x190/0x208 __dev_change_flags from netif_change_flags+0x1c/0x58 netif_change_flags from dev_change_flags+0x38/0xa0 dev_change_flags from ip_auto_config+0x2c4/0x11f0 ip_auto_config from do_one_initcall+0x58/0x200 do_one_initcall from kernel_init_freeable+0x1cc/0x238 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x38 [... TRIM...] Standardize the error handling by making the function return NULL on all error conditions. The API is used in just the netcp_core.c so the impact is limited. Note, this change, in effect reverts commit 5b6cb43 ("net: ethernet: ti: netcp_core: return error while dma channel open issue"), but provides a less error prone implementation. Suggested-by: Simon Horman <[email protected]> Suggested-by: Jacob Keller <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 0ebc27a ] Since commit 30f241f ("xsk: Fix immature cq descriptor production"), the descriptor number is stored in skb control block and xsk_cq_submit_addr_locked() relies on it to put the umem addrs onto pool's completion queue. skb control block shouldn't be used for this purpose as after transmit xsk doesn't have control over it and other subsystems could use it. This leads to the following kernel panic due to a NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 1 PID: 927 Comm: p4xsk.bin Not tainted 6.16.12+deb14-cloud-amd64 #1 PREEMPT(lazy) Debian 6.16.12-1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:xsk_destruct_skb+0xd0/0x180 [...] Call Trace: <IRQ> ? napi_complete_done+0x7a/0x1a0 ip_rcv_core+0x1bb/0x340 ip_rcv+0x30/0x1f0 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0x87/0x130 __napi_poll+0x28/0x180 net_rx_action+0x339/0x420 handle_softirqs+0xdc/0x320 ? handle_edge_irq+0x90/0x1e0 do_softirq.part.0+0x3b/0x60 </IRQ> <TASK> __local_bh_enable_ip+0x60/0x70 __dev_direct_xmit+0x14e/0x1f0 __xsk_generic_xmit+0x482/0xb70 ? __remove_hrtimer+0x41/0xa0 ? __xsk_generic_xmit+0x51/0xb70 ? _raw_spin_unlock_irqrestore+0xe/0x40 xsk_sendmsg+0xda/0x1c0 __sys_sendto+0x1ee/0x200 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x84/0x2f0 ? __pfx_pollwake+0x10/0x10 ? __rseq_handle_notify_resume+0xad/0x4c0 ? restore_fpregs_from_fpstate+0x3c/0x90 ? switch_fpu_return+0x5b/0xe0 ? do_syscall_64+0x204/0x2f0 ? do_syscall_64+0x204/0x2f0 ? do_syscall_64+0x204/0x2f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [...] Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x1c000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Instead use the skb destructor_arg pointer along with pointer tagging. As pointers are always aligned to 8B, use the bottom bit to indicate whether this a single address or an allocated struct containing several addresses. Fixes: 30f241f ("xsk: Fix immature cq descriptor production") Closes: https://lore.kernel.org/netdev/[email protected]/ Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Fernando Fernandez Mancera <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Reviewed-by: Jason Xing <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 43962db upstream. The crash in process_v2_sparse_read() for fscrypt-encrypted directories has been reported. Issue takes place for Ceph msgr2 protocol in secure mode. It can be reproduced by the steps: sudo mount -t ceph :/ /mnt/cephfs/ -o name=admin,fs=cephfs,ms_mode=secure (1) mkdir /mnt/cephfs/fscrypt-test-3 (2) cp area_decrypted.tar /mnt/cephfs/fscrypt-test-3 (3) fscrypt encrypt --source=raw_key --key=./my.key /mnt/cephfs/fscrypt-test-3 (4) fscrypt lock /mnt/cephfs/fscrypt-test-3 (5) fscrypt unlock --key=my.key /mnt/cephfs/fscrypt-test-3 (6) cat /mnt/cephfs/fscrypt-test-3/area_decrypted.tar (7) Issue has been triggered [ 408.072247] ------------[ cut here ]------------ [ 408.072251] WARNING: CPU: 1 PID: 392 at net/ceph/messenger_v2.c:865 ceph_con_v2_try_read+0x4b39/0x72f0 [ 408.072267] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypass polyval_clmulni ghash_clmulni_intel aesni_intel rapl input_leds psmouse serio_raw i2c_piix4 vga16fb bochs vgastate i2c_smbus floppy mac_hid qemu_fw_cfg pata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore [ 408.072304] CPU: 1 UID: 0 PID: 392 Comm: kworker/1:3 Not tainted 6.17.0-rc7+ [ 408.072307] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-5.fc42 04/01/2014 [ 408.072310] Workqueue: ceph-msgr ceph_con_workfn [ 408.072314] RIP: 0010:ceph_con_v2_try_read+0x4b39/0x72f0 [ 408.072317] Code: c7 c1 20 f0 d4 ae 50 31 d2 48 c7 c6 60 27 d5 ae 48 c7 c7 f8 8e 6f b0 68 60 38 d5 ae e8 00 47 61 fe 48 83 c4 18 e9 ac fc ff ff <0f> 0b e9 06 fe ff ff 4c 8b 9d 98 fd ff ff 0f 84 64 e7 ff ff 89 85 [ 408.072319] RSP: 0018:ffff88811c3e7a30 EFLAGS: 00010246 [ 408.072322] RAX: ffffed1024874c6f RBX: ffffea00042c2b40 RCX: 0000000000000f38 [ 408.072324] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 408.072325] RBP: ffff88811c3e7ca8 R08: 0000000000000000 R09: 00000000000000c8 [ 408.072326] R10: 00000000000000c8 R11: 0000000000000000 R12: 00000000000000c8 [ 408.072327] R13: dffffc0000000000 R14: ffff8881243a6030 R15: 0000000000003000 [ 408.072329] FS: 0000000000000000(0000) GS:ffff88823eadf000(0000) knlGS:0000000000000000 [ 408.072331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 408.072332] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0 [ 408.072336] PKRU: 55555554 [ 408.072337] Call Trace: [ 408.072338] <TASK> [ 408.072340] ? sched_clock_noinstr+0x9/0x10 [ 408.072344] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [ 408.072347] ? _raw_spin_unlock+0xe/0x40 [ 408.072349] ? finish_task_switch.isra.0+0x15d/0x830 [ 408.072353] ? __kasan_check_write+0x14/0x30 [ 408.072357] ? mutex_lock+0x84/0xe0 [ 408.072359] ? __pfx_mutex_lock+0x10/0x10 [ 408.072361] ceph_con_workfn+0x27e/0x10e0 [ 408.072364] ? metric_delayed_work+0x311/0x2c50 [ 408.072367] process_one_work+0x611/0xe20 [ 408.072371] ? __kasan_check_write+0x14/0x30 [ 408.072373] worker_thread+0x7e3/0x1580 [ 408.072375] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 408.072378] ? __pfx_worker_thread+0x10/0x10 [ 408.072381] kthread+0x381/0x7a0 [ 408.072383] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 408.072385] ? __pfx_kthread+0x10/0x10 [ 408.072387] ? __kasan_check_write+0x14/0x30 [ 408.072389] ? recalc_sigpending+0x160/0x220 [ 408.072392] ? _raw_spin_unlock_irq+0xe/0x50 [ 408.072394] ? calculate_sigpending+0x78/0xb0 [ 408.072395] ? __pfx_kthread+0x10/0x10 [ 408.072397] ret_from_fork+0x2b6/0x380 [ 408.072400] ? __pfx_kthread+0x10/0x10 [ 408.072402] ret_from_fork_asm+0x1a/0x30 [ 408.072406] </TASK> [ 408.072407] ---[ end trace 0000000000000000 ]--- [ 408.072418] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI [ 408.072984] KASAN: null-ptr-deref in range [0x0000000000000000- 0x0000000000000007] [ 408.073350] CPU: 1 UID: 0 PID: 392 Comm: kworker/1:3 Tainted: G W 6.17.0-rc7+ #1 PREEMPT(voluntary) [ 408.073886] Tainted: [W]=WARN [ 408.074042] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-5.fc42 04/01/2014 [ 408.074468] Workqueue: ceph-msgr ceph_con_workfn [ 408.074694] RIP: 0010:ceph_msg_data_advance+0x79/0x1a80 [ 408.074976] Code: fc ff df 49 8d 77 08 48 c1 ee 03 80 3c 16 00 0f 85 07 11 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b 5f 08 48 89 de 48 c1 ee 03 <0f> b6 14 16 84 d2 74 09 80 fa 03 0f 8e 0f 0e 00 00 8b 13 83 fa 03 [ 408.075884] RSP: 0018:ffff88811c3e7990 EFLAGS: 00010246 [ 408.076305] RAX: ffff8881243a6388 RBX: 0000000000000000 RCX: 0000000000000000 [ 408.076909] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff8881243a6378 [ 408.077466] RBP: ffff88811c3e7a20 R08: 0000000000000000 R09: 00000000000000c8 [ 408.078034] R10: ffff8881243a6388 R11: 0000000000000000 R12: ffffed1024874c71 [ 408.078575] R13: dffffc0000000000 R14: ffff8881243a6030 R15: ffff8881243a6378 [ 408.079159] FS: 0000000000000000(0000) GS:ffff88823eadf000(0000) knlGS:0000000000000000 [ 408.079736] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 408.080039] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0 [ 408.080376] PKRU: 55555554 [ 408.080513] Call Trace: [ 408.080630] <TASK> [ 408.080729] ceph_con_v2_try_read+0x49b9/0x72f0 [ 408.081115] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [ 408.081348] ? _raw_spin_unlock+0xe/0x40 [ 408.081538] ? finish_task_switch.isra.0+0x15d/0x830 [ 408.081768] ? __kasan_check_write+0x14/0x30 [ 408.081986] ? mutex_lock+0x84/0xe0 [ 408.082160] ? __pfx_mutex_lock+0x10/0x10 [ 408.082343] ceph_con_workfn+0x27e/0x10e0 [ 408.082529] ? metric_delayed_work+0x311/0x2c50 [ 408.082737] process_one_work+0x611/0xe20 [ 408.082948] ? __kasan_check_write+0x14/0x30 [ 408.083156] worker_thread+0x7e3/0x1580 [ 408.083331] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 408.083557] ? __pfx_worker_thread+0x10/0x10 [ 408.083751] kthread+0x381/0x7a0 [ 408.083922] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 408.084139] ? __pfx_kthread+0x10/0x10 [ 408.084310] ? __kasan_check_write+0x14/0x30 [ 408.084510] ? recalc_sigpending+0x160/0x220 [ 408.084708] ? _raw_spin_unlock_irq+0xe/0x50 [ 408.084917] ? calculate_sigpending+0x78/0xb0 [ 408.085138] ? __pfx_kthread+0x10/0x10 [ 408.085335] ret_from_fork+0x2b6/0x380 [ 408.085525] ? __pfx_kthread+0x10/0x10 [ 408.085720] ret_from_fork_asm+0x1a/0x30 [ 408.085922] </TASK> [ 408.086036] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypass polyval_clmulni ghash_clmulni_intel aesni_intel rapl input_leds psmouse serio_raw i2c_piix4 vga16fb bochs vgastate i2c_smbus floppy mac_hid qemu_fw_cfg pata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore [ 408.087778] ---[ end trace 0000000000000000 ]--- [ 408.088007] RIP: 0010:ceph_msg_data_advance+0x79/0x1a80 [ 408.088260] Code: fc ff df 49 8d 77 08 48 c1 ee 03 80 3c 16 00 0f 85 07 11 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b 5f 08 48 89 de 48 c1 ee 03 <0f> b6 14 16 84 d2 74 09 80 fa 03 0f 8e 0f 0e 00 00 8b 13 83 fa 03 [ 408.089118] RSP: 0018:ffff88811c3e7990 EFLAGS: 00010246 [ 408.089357] RAX: ffff8881243a6388 RBX: 0000000000000000 RCX: 0000000000000000 [ 408.089678] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff8881243a6378 [ 408.090020] RBP: ffff88811c3e7a20 R08: 0000000000000000 R09: 00000000000000c8 [ 408.090360] R10: ffff8881243a6388 R11: 0000000000000000 R12: ffffed1024874c71 [ 408.090687] R13: dffffc0000000000 R14: ffff8881243a6030 R15: ffff8881243a6378 [ 408.091035] FS: 0000000000000000(0000) GS:ffff88823eadf000(0000) knlGS:0000000000000000 [ 408.091452] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 408.092015] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0 [ 408.092530] PKRU: 55555554 [ 417.112915] ================================================================== [ 417.113491] BUG: KASAN: slab-use-after-free in __mutex_lock.constprop.0+0x1522/0x1610 [ 417.114014] Read of size 4 at addr ffff888124870034 by task kworker/2:0/4951 [ 417.114587] CPU: 2 UID: 0 PID: 4951 Comm: kworker/2:0 Tainted: G D W 6.17.0-rc7+ #1 PREEMPT(voluntary) [ 417.114592] Tainted: [D]=DIE, [W]=WARN [ 417.114593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-5.fc42 04/01/2014 [ 417.114596] Workqueue: events handle_timeout [ 417.114601] Call Trace: [ 417.114602] <TASK> [ 417.114604] dump_stack_lvl+0x5c/0x90 [ 417.114610] print_report+0x171/0x4dc [ 417.114613] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 417.114617] ? kasan_complete_mode_report_info+0x80/0x220 [ 417.114621] kasan_report+0xbd/0x100 [ 417.114625] ? __mutex_lock.constprop.0+0x1522/0x1610 [ 417.114628] ? __mutex_lock.constprop.0+0x1522/0x1610 [ 417.114630] __asan_report_load4_noabort+0x14/0x30 [ 417.114633] __mutex_lock.constprop.0+0x1522/0x1610 [ 417.114635] ? queue_con_delay+0x8d/0x200 [ 417.114638] ? __pfx___mutex_lock.constprop.0+0x10/0x10 [ 417.114641] ? __send_subscribe+0x529/0xb20 [ 417.114644] __mutex_lock_slowpath+0x13/0x20 [ 417.114646] mutex_lock+0xd4/0xe0 [ 417.114649] ? __pfx_mutex_lock+0x10/0x10 [ 417.114652] ? ceph_monc_renew_subs+0x2a/0x40 [ 417.114654] ceph_con_keepalive+0x22/0x110 [ 417.114656] handle_timeout+0x6b3/0x11d0 [ 417.114659] ? _raw_spin_unlock_irq+0xe/0x50 [ 417.114662] ? __pfx_handle_timeout+0x10/0x10 [ 417.114664] ? queue_delayed_work_on+0x8e/0xa0 [ 417.114669] process_one_work+0x611/0xe20 [ 417.114672] ? __kasan_check_write+0x14/0x30 [ 417.114676] worker_thread+0x7e3/0x1580 [ 417.114678] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 417.114682] ? __pfx_sched_setscheduler_nocheck+0x10/0x10 [ 417.114687] ? __pfx_worker_thread+0x10/0x10 [ 417.114689] kthread+0x381/0x7a0 [ 417.114692] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 417.114694] ? __pfx_kthread+0x10/0x10 [ 417.114697] ? __kasan_check_write+0x14/0x30 [ 417.114699] ? recalc_sigpending+0x160/0x220 [ 417.114703] ? _raw_spin_unlock_irq+0xe/0x50 [ 417.114705] ? calculate_sigpending+0x78/0xb0 [ 417.114707] ? __pfx_kthread+0x10/0x10 [ 417.114710] ret_from_fork+0x2b6/0x380 [ 417.114713] ? __pfx_kthread+0x10/0x10 [ 417.114715] ret_from_fork_asm+0x1a/0x30 [ 417.114720] </TASK> [ 417.125171] Allocated by task 2: [ 417.125333] kasan_save_stack+0x26/0x60 [ 417.125522] kasan_save_track+0x14/0x40 [ 417.125742] kasan_save_alloc_info+0x39/0x60 [ 417.125945] __kasan_slab_alloc+0x8b/0xb0 [ 417.126133] kmem_cache_alloc_node_noprof+0x13b/0x460 [ 417.126381] copy_process+0x320/0x6250 [ 417.126595] kernel_clone+0xb7/0x840 [ 417.126792] kernel_thread+0xd6/0x120 [ 417.126995] kthreadd+0x85c/0xbe0 [ 417.127176] ret_from_fork+0x2b6/0x380 [ 417.127378] ret_from_fork_asm+0x1a/0x30 [ 417.127692] Freed by task 0: [ 417.127851] kasan_save_stack+0x26/0x60 [ 417.128057] kasan_save_track+0x14/0x40 [ 417.128267] kasan_save_free_info+0x3b/0x60 [ 417.128491] __kasan_slab_free+0x6c/0xa0 [ 417.128708] kmem_cache_free+0x182/0x550 [ 417.128906] free_task+0xeb/0x140 [ 417.129070] __put_task_struct+0x1d2/0x4f0 [ 417.129259] __put_task_struct_rcu_cb+0x15/0x20 [ 417.129480] rcu_do_batch+0x3d3/0xe70 [ 417.129681] rcu_core+0x549/0xb30 [ 417.129839] rcu_core_si+0xe/0x20 [ 417.130005] handle_softirqs+0x160/0x570 [ 417.130190] __irq_exit_rcu+0x189/0x1e0 [ 417.130369] irq_exit_rcu+0xe/0x20 [ 417.130531] sysvec_apic_timer_interrupt+0x9f/0xd0 [ 417.130768] asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ 417.131082] Last potentially related work creation: [ 417.131305] kasan_save_stack+0x26/0x60 [ 417.131484] kasan_record_aux_stack+0xae/0xd0 [ 417.131695] __call_rcu_common+0xcd/0x14b0 [ 417.131909] call_rcu+0x31/0x50 [ 417.132071] delayed_put_task_struct+0x128/0x190 [ 417.132295] rcu_do_batch+0x3d3/0xe70 [ 417.132478] rcu_core+0x549/0xb30 [ 417.132658] rcu_core_si+0xe/0x20 [ 417.132808] handle_softirqs+0x160/0x570 [ 417.132993] __irq_exit_rcu+0x189/0x1e0 [ 417.133181] irq_exit_rcu+0xe/0x20 [ 417.133353] sysvec_apic_timer_interrupt+0x9f/0xd0 [ 417.133584] asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ 417.133921] Second to last potentially related work creation: [ 417.134183] kasan_save_stack+0x26/0x60 [ 417.134362] kasan_record_aux_stack+0xae/0xd0 [ 417.134566] __call_rcu_common+0xcd/0x14b0 [ 417.134782] call_rcu+0x31/0x50 [ 417.134929] put_task_struct_rcu_user+0x58/0xb0 [ 417.135143] finish_task_switch.isra.0+0x5d3/0x830 [ 417.135366] __schedule+0xd30/0x5100 [ 417.135534] schedule_idle+0x5a/0x90 [ 417.135712] do_idle+0x25f/0x410 [ 417.135871] cpu_startup_entry+0x53/0x70 [ 417.136053] start_secondary+0x216/0x2c0 [ 417.136233] common_startup_64+0x13e/0x141 [ 417.136894] The buggy address belongs to the object at ffff888124870000 which belongs to the cache task_struct of size 10504 [ 417.138122] The buggy address is located 52 bytes inside of freed 10504-byte region [ffff888124870000, ffff888124872908) [ 417.139465] The buggy address belongs to the physical page: [ 417.140016] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x124870 [ 417.140789] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 417.141519] memcg:ffff88811aa20e01 [ 417.141874] anon flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff) [ 417.142600] page_type: f5(slab) [ 417.142922] raw: 0017ffffc0000040 ffff88810094f040 0000000000000000 dead000000000001 [ 417.143554] raw: 0000000000000000 0000000000030003 00000000f5000000 ffff88811aa20e01 [ 417.143954] head: 0017ffffc0000040 ffff88810094f040 0000000000000000 dead000000000001 [ 417.144329] head: 0000000000000000 0000000000030003 00000000f5000000 ffff88811aa20e01 [ 417.144710] head: 0017ffffc0000003 ffffea0004921c01 00000000ffffffff 00000000ffffffff [ 417.145106] head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008 [ 417.145485] page dumped because: kasan: bad access detected [ 417.145859] Memory state around the buggy address: [ 417.146094] ffff88812486ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 417.146439] ffff88812486ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 417.146791] >ffff888124870000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 417.147145] ^ [ 417.147387] ffff888124870080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 417.147751] ffff888124870100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 417.148123] ================================================================== First of all, we have warning in get_bvec_at() because cursor->total_resid contains zero value. And, finally, we have crash in ceph_msg_data_advance() because cursor->data is NULL. It means that get_bvec_at() receives not initialized ceph_msg_data_cursor structure because data is NULL and total_resid contains zero. Moreover, we don't have likewise issue for the case of Ceph msgr1 protocol because ceph_msg_data_cursor_init() has been called before reading sparse data. This patch adds calling of ceph_msg_data_cursor_init() in the beginning of process_v2_sparse_read() with the goal to guarantee that logic of reading sparse data works correctly for the case of Ceph msgr2 protocol. Cc: [email protected] Link: https://tracker.ceph.com/issues/73152 Signed-off-by: Viacheslav Dubeyko <[email protected]> Reviewed-by: Ilya Dryomov <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…ptcp_do_fastclose(). commit f07f4ea upstream. syzbot reported divide-by-zero in __tcp_select_window() by MPTCP socket. [0] We had a similar issue for the bare TCP and fixed in commit 499350a ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0"). Let's apply the same fix to mptcp_do_fastclose(). [0]: Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 6068 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:__tcp_select_window+0x824/0x1320 net/ipv4/tcp_output.c:3336 Code: ff ff ff 44 89 f1 d3 e0 89 c1 f7 d1 41 01 cc 41 21 c4 e9 a9 00 00 00 e8 ca 49 01 f8 e9 9c 00 00 00 e8 c0 49 01 f8 44 89 e0 99 <f7> 7c 24 1c 41 29 d4 48 bb 00 00 00 00 00 fc ff df e9 80 00 00 00 RSP: 0018:ffffc90003017640 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88807b469e40 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90003017730 R08: ffff888033268143 R09: 1ffff1100664d028 R10: dffffc0000000000 R11: ffffed100664d029 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 000055557faa0500(0000) GS:ffff888126135000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f64a1912ff8 CR3: 0000000072122000 CR4: 00000000003526f0 Call Trace: <TASK> tcp_select_window net/ipv4/tcp_output.c:281 [inline] __tcp_transmit_skb+0xbc7/0x3aa0 net/ipv4/tcp_output.c:1568 tcp_transmit_skb net/ipv4/tcp_output.c:1649 [inline] tcp_send_active_reset+0x2d1/0x5b0 net/ipv4/tcp_output.c:3836 mptcp_do_fastclose+0x27e/0x380 net/mptcp/protocol.c:2793 mptcp_disconnect+0x238/0x710 net/mptcp/protocol.c:3253 mptcp_sendmsg_fastopen+0x2f8/0x580 net/mptcp/protocol.c:1776 mptcp_sendmsg+0x1774/0x1980 net/mptcp/protocol.c:1855 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe5/0x270 net/socket.c:742 __sys_sendto+0x3bd/0x520 net/socket.c:2244 __do_sys_sendto net/socket.c:2251 [inline] __se_sys_sendto net/socket.c:2247 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2247 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f66e998f749 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffff9acedb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f66e9be5fa0 RCX: 00007f66e998f749 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007ffff9acee10 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007f66e9be5fa0 R14: 00007f66e9be5fa0 R15: 0000000000000006 </TASK> Fixes: ae15506 ("mptcp: fix duplicate reset on fastclose") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Cc: [email protected] Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit eb9ac77 upstream. A synchronous external abort occurs on the Renesas RZ/G3S SoC if unbind is executed after the configuration sequence described above: modprobe usb_f_ecm modprobe libcomposite modprobe configfs cd /sys/kernel/config/usb_gadget mkdir -p g1 cd g1 echo "0x1d6b" > idVendor echo "0x0104" > idProduct mkdir -p strings/0x409 echo "0123456789" > strings/0x409/serialnumber echo "Renesas." > strings/0x409/manufacturer echo "Ethernet Gadget" > strings/0x409/product mkdir -p functions/ecm.usb0 mkdir -p configs/c.1 mkdir -p configs/c.1/strings/0x409 echo "ECM" > configs/c.1/strings/0x409/configuration if [ ! -L configs/c.1/ecm.usb0 ]; then ln -s functions/ecm.usb0 configs/c.1 fi echo 11e20000.usb > UDC echo 11e20000.usb > /sys/bus/platform/drivers/renesas_usbhs/unbind The displayed trace is as follows: Internal error: synchronous external abort: 0000000096000010 [#1] SMP CPU: 0 UID: 0 PID: 188 Comm: sh Tainted: G M 6.17.0-rc7-next-20250922-00010-g41050493b2bd torvalds#55 PREEMPT Tainted: [M]=MACHINE_CHECK Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] lr : usbhsg_update_pullup+0x3c/0x68 [renesas_usbhs] sp : ffff8000838b3920 x29: ffff8000838b3920 x28: ffff00000d585780 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000c3e3810 x23: ffff00000d5e5c80 x22: ffff00000d5e5d40 x21: 0000000000000000 x20: 0000000000000000 x19: ffff00000d5e5c80 x18: 0000000000000020 x17: 2e30303230316531 x16: 312d7968703a7968 x15: 3d454d414e5f4344 x14: 000000000000002c x13: 0000000000000000 x12: 0000000000000000 x11: ffff00000f358f38 x10: ffff00000f358db0 x9 : ffff00000b41f418 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 000000004b5ccb9d x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff800083790000 x0 : ffff00000d5e5c80 Call trace: usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] (P) usbhsg_pullup+0x4c/0x7c [renesas_usbhs] usb_gadget_disconnect_locked+0x48/0xd4 gadget_unbind_driver+0x44/0x114 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_release_driver+0x18/0x24 bus_remove_device+0xcc/0x10c device_del+0x14c/0x404 usb_del_gadget+0x88/0xc0 usb_del_gadget_udc+0x18/0x30 usbhs_mod_gadget_remove+0x24/0x44 [renesas_usbhs] usbhs_mod_remove+0x20/0x30 [renesas_usbhs] usbhs_remove+0x98/0xdc [renesas_usbhs] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_driver_detach+0x18/0x24 unbind_store+0xb4/0xb8 drv_attr_store+0x24/0x38 sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x128/0x1b8 vfs_write+0x2ac/0x350 ksys_write+0x68/0xfc __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 7100003f 1a9f07e1 531c6c22 f9400001 (79400021) ---[ end trace 0000000000000000 ]--- note: sh[188] exited with irqs disabled note: sh[188] exited with preempt_count 1 The issue occurs because usbhs_sys_function_pullup(), which accesses the IP registers, is executed after the USBHS clocks have been disabled. The problem is reproducible on the Renesas RZ/G3S SoC starting with the addition of module stop in the clock enable/disable APIs. With module stop functionality enabled, a bus error is expected if a master accesses a module whose clock has been stopped and module stop activated. Disable the IP clocks at the end of remove. Cc: stable <[email protected]> Fixes: f1407d5 ("usb: renesas_usbhs: Add Renesas USBHS common code") Signed-off-by: Claudiu Beznea <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 3ce62c1 upstream. [WHAT] IGT kms_cursor_legacy's long-nonblocking-modeset-vs-cursor-atomic fails with NULL pointer dereference. This can be reproduced with both an eDP panel and a DP monitors connected. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 13 UID: 0 PID: 2960 Comm: kms_cursor_lega Not tainted 6.16.0-99-custom torvalds#8 PREEMPT(voluntary) Hardware name: AMD ........ RIP: 0010:dc_stream_get_scanoutpos+0x34/0x130 [amdgpu] Code: 57 4d 89 c7 41 56 49 89 ce 41 55 49 89 d5 41 54 49 89 fc 53 48 83 ec 18 48 8b 87 a0 64 00 00 48 89 75 d0 48 c7 c6 e0 41 30 c2 <48> 8b 38 48 8b 9f 68 06 00 00 e8 8d d7 fd ff 31 c0 48 81 c3 e0 02 RSP: 0018:ffffd0f3c2bd7608 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffd0f3c2bd7668 RDX: ffffd0f3c2bd7664 RSI: ffffffffc23041e0 RDI: ffff8b32494b8000 RBP: ffffd0f3c2bd7648 R08: ffffd0f3c2bd766c R09: ffffd0f3c2bd7760 R10: ffffd0f3c2bd7820 R11: 0000000000000000 R12: ffff8b32494b8000 R13: ffffd0f3c2bd7664 R14: ffffd0f3c2bd7668 R15: ffffd0f3c2bd766c FS: 000071f631b68700(0000) GS:ffff8b399f114000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001b8105000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> dm_crtc_get_scanoutpos+0xd7/0x180 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x86/0x1c0 [amdgpu] ? __pfx_amdgpu_crtc_get_scanout_position+0x10/0x10[amdgpu] amdgpu_crtc_get_scanout_position+0x27/0x50 [amdgpu] drm_crtc_vblank_helper_get_vblank_timestamp_internal+0xf7/0x400 drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x30 drm_crtc_get_last_vbltimestamp+0x55/0x90 drm_crtc_next_vblank_start+0x45/0xa0 drm_atomic_helper_wait_for_fences+0x81/0x1f0 ... Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Hung <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 621e55f) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

…em corrupted commit 986835b upstream. There's issue when file system corrupted: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:1289! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 5 UID: 0 PID: 2031 Comm: mkdir Not tainted 6.18.0-rc1-next RIP: 0010:jbd2_journal_get_create_access+0x3b6/0x4d0 RSP: 0018:ffff888117aafa30 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88811a86b000 RCX: ffffffff89a63534 RDX: 1ffff110200ec602 RSI: 0000000000000004 RDI: ffff888100763010 RBP: ffff888100763000 R08: 0000000000000001 R09: ffff888100763028 R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88812c432000 R14: ffff88812c608000 R15: ffff888120bfc000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f91d6970c99 CR3: 00000001159c4000 CR4: 00000000000006f0 Call Trace: <TASK> __ext4_journal_get_create_access+0x42/0x170 ext4_getblk+0x319/0x6f0 ext4_bread+0x11/0x100 ext4_append+0x1e6/0x4a0 ext4_init_new_dir+0x145/0x1d0 ext4_mkdir+0x326/0x920 vfs_mkdir+0x45c/0x740 do_mkdirat+0x234/0x2f0 __x64_sys_mkdir+0xd6/0x120 do_syscall_64+0x5f/0xfa0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The above issue occurs with us in errors=continue mode when accompanied by storage failures. There have been many inconsistencies in the file system data. In the case of file system data inconsistency, for example, if the block bitmap of a referenced block is not set, it can lead to the situation where a block being committed is allocated and used again. As a result, the following condition will not be satisfied then trigger BUG_ON. Of course, it is entirely possible to construct a problematic image that can trigger this BUG_ON through specific operations. In fact, I have constructed such an image and easily reproduced this issue. Therefore, J_ASSERT() holds true only under ideal conditions, but it may not necessarily be satisfied in exceptional scenarios. Using J_ASSERT() directly in abnormal situations would cause the system to crash, which is clearly not what we want. So here we directly trigger a JBD abort instead of immediately invoking BUG_ON. Fixes: 470decc ("[PATCH] jbd2: initial copy of files from jbd") Signed-off-by: Ye Bin <[email protected]> Reviewed-by: Jan Kara <[email protected]> Message-ID: <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 0cd8fee upstream. Fix a race between inline data destruction and block mapping. The function ext4_destroy_inline_data_nolock() changes the inode data layout by clearing EXT4_INODE_INLINE_DATA and setting EXT4_INODE_EXTENTS. At the same time, another thread may execute ext4_map_blocks(), which tests EXT4_INODE_EXTENTS to decide whether to call ext4_ext_map_blocks() or ext4_ind_map_blocks(). Without i_data_sem protection, ext4_ind_map_blocks() may receive inode with EXT4_INODE_EXTENTS flag and triggering assert. kernel BUG at fs/ext4/indirect.c:546! EXT4-fs (loop2): unmounting filesystem. invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:ext4_ind_map_blocks.cold+0x2b/0x5a fs/ext4/indirect.c:546 Call Trace: <TASK> ext4_map_blocks+0xb9b/0x16f0 fs/ext4/inode.c:681 _ext4_get_block+0x242/0x590 fs/ext4/inode.c:822 ext4_block_write_begin+0x48b/0x12c0 fs/ext4/inode.c:1124 ext4_write_begin+0x598/0xef0 fs/ext4/inode.c:1255 ext4_da_write_begin+0x21e/0x9c0 fs/ext4/inode.c:3000 generic_perform_write+0x259/0x5d0 mm/filemap.c:3846 ext4_buffered_write_iter+0x15b/0x470 fs/ext4/file.c:285 ext4_file_write_iter+0x8e0/0x17f0 fs/ext4/file.c:679 call_write_iter include/linux/fs.h:2271 [inline] do_iter_readv_writev+0x212/0x3c0 fs/read_write.c:735 do_iter_write+0x186/0x710 fs/read_write.c:861 vfs_iter_write+0x70/0xa0 fs/read_write.c:902 iter_file_splice_write+0x73b/0xc90 fs/splice.c:685 do_splice_from fs/splice.c:763 [inline] direct_splice_actor+0x10f/0x170 fs/splice.c:950 splice_direct_to_actor+0x33a/0xa10 fs/splice.c:896 do_splice_direct+0x1a9/0x280 fs/splice.c:1002 do_sendfile+0xb13/0x12c0 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fixes: c755e25 ("ext4: fix deadlock between inline_data and ext4_expand_extra_isize_ea()") Cc: [email protected] # v4.11+ Signed-off-by: Alexey Nepomnyashih <[email protected]> Message-ID: <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a51f025 upstream. Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from the fact that in case of early device detach via pcl818_detach(), subdevice dev->read_subdev may not have initialized its pointer to &struct comedi_async as intended. Thus, any such dereferencing of &s->async->cmd will lead to general protection fault and kernel crash. Mitigate this problem by removing a call to pcl818_ai_cancel() from pcl818_detach() altogether. This way, if the subdevice setups its support for async commands, everything async-related will be handled via subdevice's own ->cancel() function in comedi_device_detach_locked() even before pcl818_detach(). If no support for asynchronous commands is provided, there is no need to cancel anything either. [1] Syzbot crash: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762 ... Call Trace: <TASK> pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115 comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207 do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline] comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] ... Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=fce5d9d5bd067d6fbe9b Fixes: 00aba6e ("staging: comedi: pcl818: remove 'neverending_ai' from private data") Cc: stable <[email protected]> Signed-off-by: Nikita Zhandarovich <[email protected]> Reviewed-by: Ian Abbott <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 78b4d64 ] A timer that expires a vgem fence automatically in 10 seconds is now released with timer_delete_sync() from fence->ops.release() called on last dma_fence_put(). In some scenarios, it can run in IRQ context, which is not safe unless TIMER_IRQSAFE is used. One potentially risky scenario was demonstrated in Intel DRM CI trybot, BAT run on machine bat-adlp-6, while working on new IGT subtests syncobj_timeline@stress-* as user space replacements of some problematic test cases of a dma-fence-chain selftest [1]. [117.004338] ================================ [117.004340] WARNING: inconsistent lock state [117.004342] 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 Tainted: G S U [117.004346] -------------------------------- [117.004347] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [117.004349] swapper/0/0 [HC1[1]:SC1[1]:HE0:SE0] takes: [117.004352] ffff888138f86aa8 ((&fence->timer)){?.-.}-{0:0}, at: __timer_delete_sync+0x4b/0x190 [117.004361] {HARDIRQ-ON-W} state was registered at: [117.004363] lock_acquire+0xc4/0x2e0 [117.004366] call_timer_fn+0x80/0x2a0 [117.004368] __run_timers+0x231/0x310 [117.004370] run_timer_softirq+0x76/0xe0 [117.004372] handle_softirqs+0xd4/0x4d0 [117.004375] __irq_exit_rcu+0x13f/0x160 [117.004377] irq_exit_rcu+0xe/0x20 [117.004379] sysvec_apic_timer_interrupt+0xa0/0xc0 [117.004382] asm_sysvec_apic_timer_interrupt+0x1b/0x20 [117.004385] cpuidle_enter_state+0x12b/0x8a0 [117.004388] cpuidle_enter+0x2e/0x50 [117.004393] call_cpuidle+0x22/0x60 [117.004395] do_idle+0x1fd/0x260 [117.004398] cpu_startup_entry+0x29/0x30 [117.004401] start_secondary+0x12d/0x160 [117.004404] common_startup_64+0x13e/0x141 [117.004407] irq event stamp: 2282669 [117.004409] hardirqs last enabled at (2282668): [<ffffffff8289db71>] _raw_spin_unlock_irqrestore+0x51/0x80 [117.004414] hardirqs last disabled at (2282669): [<ffffffff82882021>] sysvec_irq_work+0x11/0xc0 [117.004419] softirqs last enabled at (2254702): [<ffffffff8289fd00>] __do_softirq+0x10/0x18 [117.004423] softirqs last disabled at (2254725): [<ffffffff813d4ddf>] __irq_exit_rcu+0x13f/0x160 [117.004426] other info that might help us debug this: [117.004429] Possible unsafe locking scenario: [117.004432] CPU0 [117.004433] ---- [117.004434] lock((&fence->timer)); [117.004436] <Interrupt> [117.004438] lock((&fence->timer)); [117.004440] *** DEADLOCK *** [117.004443] 1 lock held by swapper/0/0: [117.004445] #0: ffffc90000003d50 ((&fence->timer)){?.-.}-{0:0}, at: call_timer_fn+0x7a/0x2a0 [117.004450] stack backtrace: [117.004453] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G S U 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 PREEMPT(voluntary) [117.004455] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [117.004455] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 [117.004456] Call Trace: [117.004456] <IRQ> [117.004457] dump_stack_lvl+0x91/0xf0 [117.004460] dump_stack+0x10/0x20 [117.004461] print_usage_bug.part.0+0x260/0x360 [117.004463] mark_lock+0x76e/0x9c0 [117.004465] ? register_lock_class+0x48/0x4a0 [117.004467] __lock_acquire+0xbc3/0x2860 [117.004469] lock_acquire+0xc4/0x2e0 [117.004470] ? __timer_delete_sync+0x4b/0x190 [117.004472] ? __timer_delete_sync+0x4b/0x190 [117.004473] __timer_delete_sync+0x68/0x190 [117.004474] ? __timer_delete_sync+0x4b/0x190 [117.004475] timer_delete_sync+0x10/0x20 [117.004476] vgem_fence_release+0x19/0x30 [vgem] [117.004478] dma_fence_release+0xc1/0x3b0 [117.004480] ? dma_fence_release+0xa1/0x3b0 [117.004481] dma_fence_chain_release+0xe7/0x130 [117.004483] dma_fence_release+0xc1/0x3b0 [117.004484] ? _raw_spin_unlock_irqrestore+0x27/0x80 [117.004485] dma_fence_chain_irq_work+0x59/0x80 [117.004487] irq_work_single+0x75/0xa0 [117.004490] irq_work_run_list+0x33/0x60 [117.004491] irq_work_run+0x18/0x40 [117.004493] __sysvec_irq_work+0x35/0x170 [117.004494] sysvec_irq_work+0x47/0xc0 [117.004496] asm_sysvec_irq_work+0x1b/0x20 [117.004497] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [117.004499] Code: 00 75 1c 65 ff 0d d9 34 68 01 74 20 5b 41 5c 5d 31 c0 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc e8 7f 9d d3 fe fb 0f 1f 44 00 00 <eb> d7 0f 1f 44 00 00 5b 41 5c 5d 31 c0 31 d2 31 c9 31 f6 31 ff c3 [117.004499] RSP: 0018:ffffc90000003cf0 EFLAGS: 00000246 [117.004500] RAX: 0000000000000000 RBX: ffff888155e94c40 RCX: 0000000000000000 [117.004501] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [117.004502] RBP: ffffc90000003d00 R08: 0000000000000000 R09: 0000000000000000 [117.004502] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000246 [117.004502] R13: 0000000000000001 R14: 0000000000000246 R15: ffff888155e94c80 [117.004506] dma_fence_signal+0x49/0xb0 [117.004507] ? __pfx_vgem_fence_timeout+0x10/0x10 [vgem] [117.004508] vgem_fence_timeout+0x12/0x20 [vgem] [117.004509] call_timer_fn+0xa1/0x2a0 [117.004512] ? __pfx_vgem_fence_timeout+0x10/0x10 [vgem] [117.004513] __run_timers+0x231/0x310 [117.004514] ? tmigr_handle_remote+0x2ac/0x560 [117.004517] timer_expire_remote+0x46/0x70 [117.004518] tmigr_handle_remote+0x433/0x560 [117.004520] ? __run_timers+0x239/0x310 [117.004521] ? run_timer_softirq+0x21/0xe0 [117.004522] ? lock_release+0xce/0x2a0 [117.004524] run_timer_softirq+0xcf/0xe0 [117.004525] handle_softirqs+0xd4/0x4d0 [117.004526] __irq_exit_rcu+0x13f/0x160 [117.004527] irq_exit_rcu+0xe/0x20 [117.004528] sysvec_apic_timer_interrupt+0xa0/0xc0 [117.004529] </IRQ> [117.004529] <TASK> [117.004529] asm_sysvec_apic_timer_interrupt+0x1b/0x20 [117.004530] RIP: 0010:cpuidle_enter_state+0x12b/0x8a0 [117.004532] Code: 48 0f a3 05 97 ce 0e 01 0f 82 2e 03 00 00 31 ff e8 8a 41 bd fe 80 7d d0 00 0f 85 11 03 00 00 e8 8b 06 d5 fe fb 0f 1f 44 00 00 <45> 85 f6 0f 88 67 02 00 00 4d 63 ee 49 83 fd 0a 0f 83 34 06 00 00 [117.004532] RSP: 0018:ffffffff83403d88 EFLAGS: 00000246 [117.004533] RAX: 0000000000000000 RBX: ffff88888f046440 RCX: 0000000000000000 [117.004533] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [117.004534] RBP: ffffffff83403dd8 R08: 0000000000000000 R09: 0000000000000000 [117.004534] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff837cbe80 [117.004534] R13: 0000000000000004 R14: 0000000000000004 R15: 0000001ad1df466b [117.004537] ? cpuidle_enter_state+0x125/0x8a0 [117.004538] ? sched_clock_noinstr+0x9/0x10 [117.004540] cpuidle_enter+0x2e/0x50 [117.004542] call_cpuidle+0x22/0x60 [117.004542] do_idle+0x1fd/0x260 [117.004544] cpu_startup_entry+0x29/0x30 [117.004546] rest_init+0x104/0x200 [117.004548] start_kernel+0x93d/0xbd0 [117.004550] ? load_ucode_intel_bsp+0x2a/0x90 [117.004551] ? sme_unmap_bootdata+0x14/0x80 [117.004554] x86_64_start_reservations+0x18/0x30 [117.004555] x86_64_start_kernel+0xfd/0x150 [117.004556] ? soft_restart_cpu+0x14/0x14 [117.004558] common_startup_64+0x13e/0x141 [117.004560] </TASK> [117.004565] ------------[ cut here ]------------ [117.004692] WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1610 __timer_delete_sync+0x126/0x190 [117.004697] Modules linked in: vgem snd_hda_codec_intelhdmi snd_hda_codec_hdmi i915 prime_numbers ttm drm_buddy drm_display_helper cec rc_core i2c_algo_bit hid_sensor_custom hid_sensor_hub hid_generic intel_ishtp_hid hid intel_uncore_frequency intel_uncore_frequency_common x86_pkg_temp_thermal intel_powerclamp cmdlinepart ee1004 r8153_ecm spi_nor coretemp cdc_ether mei_pxp mei_hdcp usbnet mtd intel_rapl_msr wmi_bmof kvm_intel snd_hda_intel snd_intel_dspcfg processor_thermal_device_pci kvm snd_hda_codec processor_thermal_device irqbypass processor_thermal_wt_hint polyval_clmulni platform_temperature_control snd_hda_core ghash_clmulni_intel processor_thermal_rfim spi_pxa2xx_platform snd_hwdep aesni_intel processor_thermal_rapl dw_dmac snd_pcm dw_dmac_core intel_rapl_common r8152 rapl mii intel_cstate spi_pxa2xx_core i2c_i801 processor_thermal_wt_req snd_timer i2c_mux mei_me intel_ish_ipc processor_thermal_power_floor e1000e snd i2c_smbus spi_intel_pci processor_thermal_mbox mei soundcore intel_ishtp thunderbolt idma64 [117.004733] spi_intel int340x_thermal_zone igen6_edac binfmt_misc intel_skl_int3472_tps68470 intel_pmc_core tps68470_regulator video clk_tps68470 pmt_telemetry pmt_discovery nls_iso8859_1 pmt_class intel_pmc_ssram_telemetry intel_skl_int3472_discrete int3400_thermal intel_hid intel_skl_int3472_common acpi_thermal_rel intel_vsec wmi pinctrl_tigerlake acpi_tad sparse_keymap acpi_pad dm_multipath msr nvme_fabrics fuse efi_pstore nfnetlink autofs4 [117.004782] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G S U 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 PREEMPT(voluntary) [117.004787] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [117.004789] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 [117.004793] RIP: 0010:__timer_delete_sync+0x126/0x190 [117.004795] Code: 31 c0 45 31 c9 c3 cc cc cc cc 48 8b 75 d0 45 84 f6 74 63 49 c7 45 18 00 00 00 00 48 89 c7 e8 51 46 39 01 f3 90 e9 66 ff ff ff <0f> 0b e9 5f ff ff ff e8 ee e4 0c 00 49 8d 5d 28 45 31 c9 31 c9 4c [117.004801] RSP: 0018:ffffc90000003a40 EFLAGS: 00010046 [117.004804] RAX: ffffffff815093fb RBX: ffff888138f86aa8 RCX: 0000000000000000 [117.004807] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [117.004809] RBP: ffffc90000003a70 R08: 0000000000000000 R09: 0000000000000000 [117.004812] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff815093fb [117.004814] R13: ffff888138f86a80 R14: 0000000000000000 R15: 0000000000000000 [117.004817] FS: 0000000000000000(0000) GS:ffff88890b0f7000(0000) knlGS:0000000000000000 [117.004820] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [117.004823] CR2: 00005db8131eb7f0 CR3: 0000000003448000 CR4: 0000000000f52ef0 [117.004826] PKRU: 55555554 [117.004827] Call Trace: [117.004829] <IRQ> [117.004831] timer_delete_sync+0x10/0x20 [117.004833] vgem_fence_release+0x19/0x30 [vgem] [117.004836] dma_fence_release+0xc1/0x3b0 [117.004838] ? dma_fence_release+0xa1/0x3b0 [117.004841] dma_fence_chain_release+0xe7/0x130 [117.004844] dma_fence_release+0xc1/0x3b0 [117.004847] ? _raw_spin_unlock_irqrestore+0x27/0x80 [117.004850] dma_fence_chain_irq_work+0x59/0x80 [117.004853] irq_work_single+0x75/0xa0 [117.004857] irq_work_run_list+0x33/0x60 [117.004860] irq_work_run+0x18/0x40 [117.004863] __sysvec_irq_work+0x35/0x170 [117.004865] sysvec_irq_work+0x47/0xc0 [117.004868] asm_sysvec_irq_work+0x1b/0x20 [117.004871] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [117.004874] Code: 00 75 1c 65 ff 0d d9 34 68 01 74 20 5b 41 5c 5d 31 c0 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc e8 7f 9d d3 fe fb 0f 1f 44 00 00 <eb> d7 0f 1f 44 00 00 5b 41 5c 5d 31 c0 31 d2 31 c9 31 f6 31 ff c3 [117.004879] RSP: 0018:ffffc90000003cf0 EFLAGS: 00000246 [117.004882] RAX: 0000000000000000 RBX: ffff888155e94c40 RCX: 0000000000000000 [117.004884] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [117.004887] RBP: ffffc90000003d00 R08: 0000000000000000 R09: 0000000000000000 [117.004890] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000246 [117.004892] R13: 0000000000000001 R14: 0000000000000246 R15: ffff888155e94c80 [117.004897] dma_fence_signal+0x49/0xb0 [117.004899] ? __pfx_vgem_fence_timeout+0x10/0x10 [vgem] [117.004902] vgem_fence_timeout+0x12/0x20 [vgem] [117.004904] call_timer_fn+0xa1/0x2a0 [117.004908] ? __pfx_vgem_fence_timeout+0x10/0x10 [vgem] [117.004910] __run_timers+0x231/0x310 [117.004913] ? tmigr_handle_remote+0x2ac/0x560 [117.004917] timer_expire_remote+0x46/0x70 [117.004919] tmigr_handle_remote+0x433/0x560 [117.004923] ? __run_timers+0x239/0x310 [117.004925] ? run_timer_softirq+0x21/0xe0 [117.004928] ? lock_release+0xce/0x2a0 [117.004931] run_timer_softirq+0xcf/0xe0 [117.004933] handle_softirqs+0xd4/0x4d0 [117.004936] __irq_exit_rcu+0x13f/0x160 [117.004938] irq_exit_rcu+0xe/0x20 [117.004940] sysvec_apic_timer_interrupt+0xa0/0xc0 [117.004943] </IRQ> [117.004944] <TASK> [117.004946] asm_sysvec_apic_timer_interrupt+0x1b/0x20 [117.004949] RIP: 0010:cpuidle_enter_state+0x12b/0x8a0 [117.004953] Code: 48 0f a3 05 97 ce 0e 01 0f 82 2e 03 00 00 31 ff e8 8a 41 bd fe 80 7d d0 00 0f 85 11 03 00 00 e8 8b 06 d5 fe fb 0f 1f 44 00 00 <45> 85 f6 0f 88 67 02 00 00 4d 63 ee 49 83 fd 0a 0f 83 34 06 00 00 [117.004961] RSP: 0018:ffffffff83403d88 EFLAGS: 00000246 [117.004963] RAX: 0000000000000000 RBX: ffff88888f046440 RCX: 0000000000000000 [117.004966] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [117.004968] RBP: ffffffff83403dd8 R08: 0000000000000000 R09: 0000000000000000 [117.004971] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff837cbe80 [117.004974] R13: 0000000000000004 R14: 0000000000000004 R15: 0000001ad1df466b [117.004978] ? cpuidle_enter_state+0x125/0x8a0 [117.004981] ? sched_clock_noinstr+0x9/0x10 [117.004985] cpuidle_enter+0x2e/0x50 [117.004989] call_cpuidle+0x22/0x60 [117.004991] do_idle+0x1fd/0x260 [117.005001] cpu_startup_entry+0x29/0x30 [117.005004] rest_init+0x104/0x200 [117.005008] start_kernel+0x93d/0xbd0 [117.005011] ? load_ucode_intel_bsp+0x2a/0x90 [117.005014] ? sme_unmap_bootdata+0x14/0x80 [117.005017] x86_64_start_reservations+0x18/0x30 [117.005020] x86_64_start_kernel+0xfd/0x150 [117.005023] ? soft_restart_cpu+0x14/0x14 [117.005026] common_startup_64+0x13e/0x141 [117.005030] </TASK> [117.005032] irq event stamp: 2282669 [117.005034] hardirqs last enabled at (2282668): [<ffffffff8289db71>] _raw_spin_unlock_irqrestore+0x51/0x80 [117.005038] hardirqs last disabled at (2282669): [<ffffffff82882021>] sysvec_irq_work+0x11/0xc0 [117.005043] softirqs last enabled at (2254702): [<ffffffff8289fd00>] __do_softirq+0x10/0x18 [117.005047] softirqs last disabled at (2254725): [<ffffffff813d4ddf>] __irq_exit_rcu+0x13f/0x160 [117.005051] ---[ end trace 0000000000000000 ]--- Make the timer IRQ safe. [1] https://patchwork.freedesktop.org/series/154987/#rev2 Fixes: 4077798 ("drm/vgem: Attach sw fences to exported vGEM dma-buf (ioctl)") Signed-off-by: Janusz Krzysztofik <[email protected]> Reviewed-by: Christian König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 163e5f2 ] When using perf record with the `--overwrite` option, a segmentation fault occurs if an event fails to open. For example: perf record -e cycles-ct -F 1000 -a --overwrite Error: cycles-ct:H: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' perf: Segmentation fault #0 0x6466b6 in dump_stack debug.c:366 #1 0x646729 in sighandler_dump_stack debug.c:378 #2 0x453fd1 in sigsegv_handler builtin-record.c:722 #3 0x7f8454e65090 in __restore_rt libc-2.32.so[54090] #4 0x6c5671 in __perf_event__synthesize_id_index synthetic-events.c:1862 #5 0x6c5ac0 in perf_event__synthesize_id_index synthetic-events.c:1943 #6 0x458090 in record__synthesize builtin-record.c:2075 #7 0x45a85a in __cmd_record builtin-record.c:2888 torvalds#8 0x45deb6 in cmd_record builtin-record.c:4374 torvalds#9 0x4e5e33 in run_builtin perf.c:349 torvalds#10 0x4e60bf in handle_internal_command perf.c:401 torvalds#11 0x4e6215 in run_argv perf.c:448 torvalds#12 0x4e653a in main perf.c:555 torvalds#13 0x7f8454e4fa72 in __libc_start_main libc-2.32.so[3ea72] torvalds#14 0x43a3ee in _start ??:0 The --overwrite option implies --tail-synthesize, which collects non-sample events reflecting the system status when recording finishes. However, when evsel opening fails (e.g., unsupported event 'cycles-ct'), session->evlist is not initialized and remains NULL. The code unconditionally calls record__synthesize() in the error path, which iterates through the NULL evlist pointer and causes a segfault. To fix it, move the record__synthesize() call inside the error check block, so it's only called when there was no error during recording, ensuring that evlist is properly initialized. Fixes: 4ea648a ("perf record: Add --tail-synthesize option") Signed-off-by: Shuai Xue <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 23b2d2f ] When booting with KASAN enabled the following splat is encountered during probe of the k1 clock driver: UBSAN: array-index-out-of-bounds in drivers/clk/spacemit/ccu-k1.c:1044:16 index 0 is out of range for type 'clk_hw *[*]' CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc5+ #1 PREEMPT(lazy) Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2022.10spacemit 10/01/2022 Call Trace: [<ffffffff8002b628>] dump_backtrace+0x28/0x38 [<ffffffff800027d2>] show_stack+0x3a/0x50 [<ffffffff800220c2>] dump_stack_lvl+0x5a/0x80 [<ffffffff80022100>] dump_stack+0x18/0x20 [<ffffffff800164b8>] ubsan_epilogue+0x10/0x48 [<ffffffff8099034e>] __ubsan_handle_out_of_bounds+0xa6/0xa8 [<ffffffff80acbfa6>] k1_ccu_probe+0x37e/0x420 [<ffffffff80b79e6e>] platform_probe+0x56/0x98 [<ffffffff80b76a7e>] really_probe+0x9e/0x350 [<ffffffff80b76db0>] __driver_probe_device+0x80/0x138 [<ffffffff80b76f52>] driver_probe_device+0x3a/0xd0 [<ffffffff80b771c4>] __driver_attach+0xac/0x1b8 [<ffffffff80b742fc>] bus_for_each_dev+0x6c/0xc8 [<ffffffff80b76296>] driver_attach+0x26/0x38 [<ffffffff80b759ae>] bus_add_driver+0x13e/0x268 [<ffffffff80b7836a>] driver_register+0x52/0x100 [<ffffffff80b79a78>] __platform_driver_register+0x28/0x38 [<ffffffff814585da>] k1_ccu_driver_init+0x22/0x38 [<ffffffff80023a8a>] do_one_initcall+0x62/0x2a0 [<ffffffff81401c60>] do_initcalls+0x170/0x1a8 [<ffffffff81401e7a>] kernel_init_freeable+0x16a/0x1e0 [<ffffffff811f7534>] kernel_init+0x2c/0x180 [<ffffffff80025f56>] ret_from_fork_kernel+0x16/0x1d8 [<ffffffff81205336>] ret_from_fork_kernel_asm+0x16/0x18 ---[ end trace ]--- This is bogus and is simply a result of KASAN consulting the `.num` member of the struct for bounds information (as it should due to `__counted_by`) and finding 0 set by kzalloc() because it has not been initialized before the loop that fills in the array. The easy fix is to just move the line that sets `num` to before the loop that fills the array so that KASAN has the information it needs to accurately conclude that the access is valid. Fixes: 1b72c59 ("clk: spacemit: Add clock support for SpacemiT K1 SoC") Tested-by: Yanko Kaneti <[email protected]> Signed-off-by: Charles Mirabile <[email protected]> Reviewed-by: Alex Elder <[email protected]> Reviewed-by: Troy Mitchell <[email protected]> Reviewed-by: Yixun Lan <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 385aab8 ] MT7996 driver can use both wed and wed_hif2 devices to offload traffic from/to the wireless NIC. In the current codebase we assume to always use the primary wed device in wed callbacks resulting in the following crash if the hw runs wed_hif2 (e.g. 6GHz link). [ 297.455876] Unable to handle kernel read from unreadable memory at virtual address 000000000000080a [ 297.464928] Mem abort info: [ 297.467722] ESR = 0x0000000096000005 [ 297.471461] EC = 0x25: DABT (current EL), IL = 32 bits [ 297.476766] SET = 0, FnV = 0 [ 297.479809] EA = 0, S1PTW = 0 [ 297.482940] FSC = 0x05: level 1 translation fault [ 297.487809] Data abort info: [ 297.490679] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 297.496156] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 297.501196] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 297.506500] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000107480000 [ 297.512927] [000000000000080a] pgd=08000001097fb003, p4d=08000001097fb003, pud=08000001097fb003, pmd=0000000000000000 [ 297.523532] Internal error: Oops: 0000000096000005 [#1] SMP [ 297.715393] CPU: 2 UID: 0 PID: 45 Comm: kworker/u16:2 Tainted: G O 6.12.50 #0 [ 297.723908] Tainted: [O]=OOT_MODULE [ 297.727384] Hardware name: Banana Pi BPI-R4 (2x SFP+) (DT) [ 297.732857] Workqueue: nf_ft_offload_del nf_flow_rule_route_ipv6 [nf_flow_table] [ 297.740254] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 297.747205] pc : mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.752688] lr : mtk_wed_flow_remove+0x58/0x80 [ 297.757126] sp : ffffffc080fe3ae0 [ 297.760430] x29: ffffffc080fe3ae0 x28: ffffffc080fe3be0 x27: 00000000deadbef7 [ 297.767557] x26: ffffff80c5ebca00 x25: 0000000000000001 x24: ffffff80c85f4c00 [ 297.774683] x23: ffffff80c1875b78 x22: ffffffc080d42cd0 x21: ffffffc080660018 [ 297.781809] x20: ffffff80c6a076d0 x19: ffffff80c6a043c8 x18: 0000000000000000 [ 297.788935] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000 [ 297.796060] x14: 0000000000000019 x13: ffffff80c0ad8ec0 x12: 00000000fa83b2da [ 297.803185] x11: ffffff80c02700c0 x10: ffffff80c0ad8ec0 x9 : ffffff81fef96200 [ 297.810311] x8 : ffffff80c02700c0 x7 : ffffff80c02700d0 x6 : 0000000000000002 [ 297.817435] x5 : 0000000000000400 x4 : 0000000000000000 x3 : 0000000000000000 [ 297.824561] x2 : 0000000000000001 x1 : 0000000000000800 x0 : ffffff80c6a063c8 [ 297.831686] Call trace: [ 297.834123] mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.839254] mtk_wed_flow_remove+0x58/0x80 [ 297.843342] mtk_flow_offload_cmd+0x434/0x574 [ 297.847689] mtk_wed_setup_tc_block_cb+0x30/0x40 [ 297.852295] nf_flow_offload_ipv6_hook+0x7f4/0x964 [nf_flow_table] [ 297.858466] nf_flow_rule_route_ipv6+0x438/0x4a4 [nf_flow_table] [ 297.864463] process_one_work+0x174/0x300 [ 297.868465] worker_thread+0x278/0x430 [ 297.872204] kthread+0xd8/0xdc [ 297.875251] ret_from_fork+0x10/0x20 [ 297.878820] Code: 928b5ae0 8b000273 91400a60 f943fa61 (79401421) [ 297.884901] ---[ end trace 0000000000000000 ]--- Fix the issue detecting the proper wed reference to use running wed callabacks. Fixes: 83eafc9 ("wifi: mt76: mt7996: add wed tx support") Tested-by: Daniel Pawlik <[email protected]> Tested-by: Matteo Croce <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ccb61a3 ] kbd_led_set() can sleep, and so may not be used as the brightness_set() callback. Otherwise using this led with a trigger leads to system hangs accompanied by: BUG: scheduling while atomic: acpi_fakekeyd/2588/0x00000003 CPU: 4 UID: 0 PID: 2588 Comm: acpi_fakekeyd Not tainted 6.17.9+deb14-amd64 #1 PREEMPT(lazy) Debian 6.17.9-1 Hardware name: ASUSTeK COMPUTER INC. ASUS EXPERTBOOK B9403CVAR/B9403CVAR, BIOS B9403CVAR.311 12/24/2024 Call Trace: <TASK> [...] schedule_timeout+0xbd/0x100 __down_common+0x175/0x290 down_timeout+0x67/0x70 acpi_os_wait_semaphore+0x57/0x90 [...] asus_wmi_evaluate_method3+0x87/0x190 [asus_wmi] led_trigger_event+0x3f/0x60 [...] Fixes: 9fe44fc ("platform/x86: asus-wmi: Simplify the keyboard brightness updating process") Signed-off-by: Anton Khirnov <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Denis Benato <[email protected]> Link: https://patch.msgid.link/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d84e47e ] Since commit a735831 ("drm/nouveau: vendor in drm_encoder_slave API") nouveau appears to be broken for all dispnv04 GPUs (before NV50). Depending on the kernel version, either having no display output and hanging in kernel for a long time, or even oopsing in the cleanup path like: Hardware name: PowerMac11,2 PPC970MP 0x440101 PowerMac ... nouveau 0000:0a:00.0: drm: 0x14C5: Parsing digital output script table BUG: Unable to handle kernel data access on read at 0x00041520 Faulting instruction address: 0xc0003d0001be0844 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=8 NUMA PowerMac Modules linked in: windfarm_cpufreq_clamp windfarm_smu_sensors windfarm_smu_controls windfarm_pm112 snd_aoa_codec_onyx snd_aoa_fabric_layout snd_aoa windfarm_pid jo apple_mfi_fastcharge rndis_host cdc_ether usbnet mii snd_aoa_i2sbus snd_aoa_soundbus snd_pcm snd_timer snd soundcore rack_meter windfarm_smu_sat windfarm_max6690_s m75_sensor windfarm_core gpu_sched drm_gpuvm drm_exec drm_client_lib drm_ttm_helper ttm drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks syscopyar _sys_fops i2c_algo_bit backlight uio_pdrv_genirq uio uninorth_agp agpgart zram dm_mod dax ipv6 nfsv4 dns_resolver nfs lockd grace sunrpc offb cfbfillrect cfbimgblt ont input_leds sr_mod cdrom sd_mod uas ata_generic hid_apple hid_generic usbhid hid usb_storage pata_macio sata_svw libata firewire_ohci scsi_mod firewire_core ohci ehci_pci ehci_hcd tg3 ohci_hcd libphy usbcore usb_common nls_base led_class CPU: 0 UID: 0 PID: 245 Comm: (udev-worker) Not tainted 6.14.0-09584-g7d06015d936c #7 PREEMPTLAZY Hardware name: PowerMac11,2 PPC970MP 0x440101 PowerMac NIP: c0003d0001be0844 LR: c0003d0001be0830 CTR: 0000000000000000 REGS: c0000000053f70e0 TRAP: 0300 Not tainted (6.14.0-09584-g7d06015d936c) MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 24222220 XER: 00000000 DAR: 0000000000041520 DSISR: 40000000 IRQMASK: 0 \x0aGPR00: c0003d0001be0830 c0000000053f7380 c0003d0000911900 c000000007bc6800 \x0aGPR04: 0000000000000000 0000000000000000 c000000007bc6e70 0000000000000001 \x0aGPR08: 01f3040000000000 0000000000041520 0000000000000000 c0003d0000813958 \x0aGPR12: c000000000071a48 c000000000e28000 0000000000000020 0000000000000000 \x0aGPR16: 0000000000000000 0000000000f52630 0000000000000000 0000000000000000 \x0aGPR20: 0000000000000000 0000000000000000 0000000000000001 c0003d0000928528 \x0aGPR24: c0003d0000928598 0000000000000000 c000000007025480 c000000007025480 \x0aGPR28: c0000000010b4000 0000000000000000 c000000007bc1800 c000000007bc6800 NIP [c0003d0001be0844] nv_crtc_destroy+0x44/0xd4 [nouveau] LR [c0003d0001be0830] nv_crtc_destroy+0x30/0xd4 [nouveau] Call Trace: [c0000000053f7380] [c0003d0001be0830] nv_crtc_destroy+0x30/0xd4 [nouveau] (unreliable) [c0000000053f73c0] [c0003d00007f7bf4] drm_mode_config_cleanup+0x27c/0x30c [drm] [c0000000053f7490] [c0003d0001bdea50] nouveau_display_create+0x1cc/0x550 [nouveau] [c0000000053f7500] [c0003d0001bcc29c] nouveau_drm_device_init+0x1c8/0x844 [nouveau] [c0000000053f75e0] [c0003d0001bcc9ec] nouveau_drm_probe+0xd4/0x1e0 [nouveau] [c0000000053f7670] [c000000000557d24] local_pci_probe+0x50/0xa8 [c0000000053f76f0] [c000000000557fa8] pci_device_probe+0x22c/0x240 [c0000000053f7760] [c0000000005fff3c] really_probe+0x188/0x31c [c0000000053f77e0] [c000000000600204] __driver_probe_device+0x134/0x13c [c0000000053f7860] [c0000000006002c0] driver_probe_device+0x3c/0xb4 [c0000000053f78a0] [c000000000600534] __driver_attach+0x118/0x128 [c0000000053f78e0] [c0000000005fe038] bus_for_each_dev+0xa8/0xf4 [c0000000053f7950] [c0000000005ff460] driver_attach+0x2c/0x40 [c0000000053f7970] [c0000000005fea68] bus_add_driver+0x130/0x278 [c0000000053f7a00] [c00000000060117c] driver_register+0x9c/0x1a0 [c0000000053f7a80] [c00000000055623c] __pci_register_driver+0x5c/0x70 [c0000000053f7aa0] [c0003d0001c058a0] nouveau_drm_init+0x254/0x278 [nouveau] [c0000000053f7b10] [c00000000000e9bc] do_one_initcall+0x84/0x268 [c0000000053f7bf0] [c0000000001a0ba0] do_init_module+0x70/0x2d8 [c0000000053f7c70] [c0000000001a42bc] init_module_from_file+0xb4/0x108 [c0000000053f7d50] [c0000000001a4504] sys_finit_module+0x1ac/0x478 [c0000000053f7e10] [c000000000023230] system_call_exception+0x1a4/0x20c [c0000000053f7e50] [c00000000000c554] system_call_common+0xf4/0x258 --- interrupt: c00 at 0xfd5f988 NIP: 000000000fd5f988 LR: 000000000ff9b148 CTR: 0000000000000000 REGS: c0000000053f7e80 TRAP: 0c00 Not tainted (6.14.0-09584-g7d06015d936c) MSR: 100000000000d032 <HV,EE,PR,ME,IR,DR,RI> CR: 28222244 XER: 00000000 IRQMASK: 0 \x0aGPR00: 0000000000000161 00000000ffcdc2d0 00000000405db160 0000000000000020 \x0aGPR04: 000000000ffa2c9c 0000000000000000 000000000000001f 0000000000000045 \x0aGPR08: 0000000011a13770 0000000000000000 0000000000000000 0000000000000000 \x0aGPR12: 0000000000000000 0000000010249d8c 0000000000000020 0000000000000000 \x0aGPR16: 0000000000000000 0000000000f52630 0000000000000000 0000000000000000 \x0aGPR20: 0000000000000000 0000000000000000 0000000000000000 0000000011a11a70 \x0aGPR24: 0000000011a13580 0000000011a11950 0000000011a11a70 0000000000020000 \x0aGPR28: 000000000ffa2c9c 0000000000000000 000000000ffafc40 0000000011a11a70 NIP [000000000fd5f988] 0xfd5f988 LR [000000000ff9b148] 0xff9b148 --- interrupt: c00 Code: f821ffc1 418200ac e93f0000 e9290038 e9291468 eba90000 48026c0d e8410018 e93f06aa 3d290001 392982a4 79291f24 <7fdd482a> 2c3e0000 41820030 7fc3f378 ---[ end trace 0000000000000000 ]--- This is caused by the i2c encoder modules vendored into nouveau/ now depending on the equally vendored nouveau_i2c_encoder_destroy function. Trying to auto-load this modules hangs on nouveau initialization until timeout, and nouveau continues without i2c video encoders. Fix by avoiding nouveau dependency by __always_inlining that helper functions into those i2c video encoder modules. Fixes: a735831 ("drm/nouveau: vendor in drm_encoder_slave API") Signed-off-by: René Rebe <[email protected]> Reviewed-by: Lyude Paul <[email protected]> [Lyude: fixed commit reference in description] Signed-off-by: Lyude Paul <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

prp_get_untagged_frame() calls __pskb_copy() to create frame->skb_std but doesn't check if the allocation failed. If __pskb_copy() returns NULL, skb_clone() is called with a NULL pointer, causing a crash: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [CachyOS#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 0 UID: 0 PID: 5625 Comm: syz.1.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:skb_clone+0xd7/0x3a0 net/core/skbuff.c:2041 Code: 03 42 80 3c 20 00 74 08 4c 89 f7 e8 23 29 05 f9 49 83 3e 00 0f 85 a0 01 00 00 e8 94 dd 9d f8 48 8d 6b 7e 49 89 ee 49 c1 ee 03 <43> 0f b6 04 26 84 c0 0f 85 d1 01 00 00 44 0f b6 7d 00 41 83 e7 0c RSP: 0018:ffffc9000d00f200 EFLAGS: 00010207 RAX: ffffffff892235a1 RBX: 0000000000000000 RCX: ffff88803372a480 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000000 RBP: 000000000000007e R08: ffffffff8f7d0f77 R09: 1ffffffff1efa1ee R10: dffffc0000000000 R11: fffffbfff1efa1ef R12: dffffc0000000000 R13: 0000000000000820 R14: 000000000000000f R15: ffff88805144cc00 FS: 0000555557f6d500(0000) GS:ffff88808d72f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555581d35808 CR3: 000000005040e000 CR4: 0000000000352ef0 Call Trace: <TASK> hsr_forward_do net/hsr/hsr_forward.c:-1 [inline] hsr_forward_skb+0x1013/0x2860 net/hsr/hsr_forward.c:741 hsr_handle_frame+0x6ce/0xa70 net/hsr/hsr_slave.c:84 __netif_receive_skb_core+0x10b9/0x4380 net/core/dev.c:5966 __netif_receive_skb_one_core net/core/dev.c:6077 [inline] __netif_receive_skb+0x72/0x380 net/core/dev.c:6192 netif_receive_skb_internal net/core/dev.c:6278 [inline] netif_receive_skb+0x1cb/0x790 net/core/dev.c:6337 tun_rx_batched+0x1b9/0x730 drivers/net/tun.c:1485 tun_get_user+0x2b65/0x3e90 drivers/net/tun.c:1953 tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x5c9/0xb30 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0449f8e1ff Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 f9 92 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 4c 93 02 00 48 RSP: 002b:00007ffd7ad94c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f044a1e5fa0 RCX: 00007f0449f8e1ff RDX: 000000000000003e RSI: 0000200000000500 RDI: 00000000000000c8 RBP: 00007ffd7ad94d20 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000003e R11: 0000000000000293 R12: 0000000000000001 R13: 00007f044a1e5fa0 R14: 00007f044a1e5fa0 R15: 0000000000000003 </TASK> Add a NULL check immediately after __pskb_copy() to handle allocation failures gracefully. Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=2fa344348a579b779e05 Fixes: f266a68 ("net/hsr: Better frame dispatch") Cc: [email protected] Signed-off-by: Shaurya Rane <[email protected]> Reviewed-by: Felix Maurer <[email protected]> Tested-by: Felix Maurer <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

…in ets_qdisc_change [email protected] says: The vulnerability is a race condition between `ets_qdisc_dequeue` and `ets_qdisc_change`. It leads to UAF on `struct Qdisc` object. Attacker requires the capability to create new user and network namespace in order to trigger the bug. See my additional commentary at the end of the analysis. Analysis: static int ets_qdisc_change(struct Qdisc *sch, struct nlattr *opt, struct netlink_ext_ack *extack) { ... // (1) this lock is preventing .change handler (`ets_qdisc_change`) //to race with .dequeue handler (`ets_qdisc_dequeue`) sch_tree_lock(sch); for (i = nbands; i < oldbands; i++) { if (i >= q->nstrict && q->classes[i].qdisc->q.qlen) list_del_init(&q->classes[i].alist); qdisc_purge_queue(q->classes[i].qdisc); } WRITE_ONCE(q->nbands, nbands); for (i = nstrict; i < q->nstrict; i++) { if (q->classes[i].qdisc->q.qlen) { // (2) the class is added to the q->active list_add_tail(&q->classes[i].alist, &q->active); q->classes[i].deficit = quanta[i]; } } WRITE_ONCE(q->nstrict, nstrict); memcpy(q->prio2band, priomap, sizeof(priomap)); for (i = 0; i < q->nbands; i++) WRITE_ONCE(q->classes[i].quantum, quanta[i]); for (i = oldbands; i < q->nbands; i++) { q->classes[i].qdisc = queues[i]; if (q->classes[i].qdisc != &noop_qdisc) qdisc_hash_add(q->classes[i].qdisc, true); } // (3) the qdisc is unlocked, now dequeue can be called in parallel // to the rest of .change handler sch_tree_unlock(sch); ets_offload_change(sch); for (i = q->nbands; i < oldbands; i++) { // (4) we're reducing the refcount for our class's qdisc and // freeing it qdisc_put(q->classes[i].qdisc); // (5) If we call .dequeue between (4) and (5), we will have // a strong UAF and we can control RIP q->classes[i].qdisc = NULL; WRITE_ONCE(q->classes[i].quantum, 0); q->classes[i].deficit = 0; gnet_stats_basic_sync_init(&q->classes[i].bstats); memset(&q->classes[i].qstats, 0, sizeof(q->classes[i].qstats)); } return 0; } Comment: This happens because some of the classes have their qdiscs assigned to NULL, but remain in the active list. This commit fixes this issue by always removing the class from the active list before deleting and freeing its associated qdisc Reproducer Steps (trimmed version of what was sent by [email protected]) ``` DEV="${DEV:-lo}" ROOT_HANDLE="${ROOT_HANDLE:-1:}" BAND2_HANDLE="${BAND2_HANDLE:-20:}" # child under 1:2 PING_BYTES="${PING_BYTES:-48}" PING_COUNT="${PING_COUNT:-200000}" PING_DST="${PING_DST:-127.0.0.1}" SLOW_TBF_RATE="${SLOW_TBF_RATE:-8bit}" SLOW_TBF_BURST="${SLOW_TBF_BURST:-100b}" SLOW_TBF_LAT="${SLOW_TBF_LAT:-1s}" cleanup() { tc qdisc del dev "$DEV" root 2>/dev/null } trap cleanup EXIT ip link set "$DEV" up tc qdisc del dev "$DEV" root 2>/dev/null || true tc qdisc add dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2 tc qdisc add dev "$DEV" parent 1:2 handle "$BAND2_HANDLE" \ tbf rate "$SLOW_TBF_RATE" burst "$SLOW_TBF_BURST" latency "$SLOW_TBF_LAT" tc filter add dev "$DEV" parent 1: protocol all prio 1 u32 match u32 0 0 flowid 1:2 tc -s qdisc ls dev $DEV ping -I "$DEV" -f -c "$PING_COUNT" -s "$PING_BYTES" -W 0.001 "$PING_DST" \ >/dev/null 2>&1 & tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 0 tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2 tc -s qdisc ls dev $DEV tc qdisc del dev "$DEV" parent 1:2 || true tc -s qdisc ls dev $DEV tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 1 strict 1 ``` KASAN report ``` ================================================================== BUG: KASAN: slab-use-after-free in ets_qdisc_dequeue+0x1071/0x11b0 kernel/net/sched/sch_ets.c:481 Read of size 8 at addr ffff8880502fc018 by task ping/12308 > CPU: 0 UID: 0 PID: 12308 Comm: ping Not tainted 6.18.0-rc4-dirty CachyOS#1 PREEMPT(full) Hardware name: QEMU Ubuntu 25.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> __dump_stack kernel/lib/dump_stack.c:94 dump_stack_lvl+0x100/0x190 kernel/lib/dump_stack.c:120 print_address_description kernel/mm/kasan/report.c:378 print_report+0x156/0x4c9 kernel/mm/kasan/report.c:482 kasan_report+0xdf/0x110 kernel/mm/kasan/report.c:595 ets_qdisc_dequeue+0x1071/0x11b0 kernel/net/sched/sch_ets.c:481 dequeue_skb kernel/net/sched/sch_generic.c:294 qdisc_restart kernel/net/sched/sch_generic.c:399 __qdisc_run+0x1c9/0x1b00 kernel/net/sched/sch_generic.c:417 __dev_xmit_skb kernel/net/core/dev.c:4221 __dev_queue_xmit+0x2848/0x4410 kernel/net/core/dev.c:4729 dev_queue_xmit kernel/./include/linux/netdevice.h:3365 [...] Allocated by task 17115: kasan_save_stack+0x30/0x50 kernel/mm/kasan/common.c:56 kasan_save_track+0x14/0x30 kernel/mm/kasan/common.c:77 poison_kmalloc_redzone kernel/mm/kasan/common.c:400 __kasan_kmalloc+0xaa/0xb0 kernel/mm/kasan/common.c:417 kasan_kmalloc kernel/./include/linux/kasan.h:262 __do_kmalloc_node kernel/mm/slub.c:5642 __kmalloc_node_noprof+0x34e/0x990 kernel/mm/slub.c:5648 kmalloc_node_noprof kernel/./include/linux/slab.h:987 qdisc_alloc+0xb8/0xc30 kernel/net/sched/sch_generic.c:950 qdisc_create_dflt+0x93/0x490 kernel/net/sched/sch_generic.c:1012 ets_class_graft+0x4fd/0x800 kernel/net/sched/sch_ets.c:261 qdisc_graft+0x3e4/0x1780 kernel/net/sched/sch_api.c:1196 [...] Freed by task 9905: kasan_save_stack+0x30/0x50 kernel/mm/kasan/common.c:56 kasan_save_track+0x14/0x30 kernel/mm/kasan/common.c:77 __kasan_save_free_info+0x3b/0x70 kernel/mm/kasan/generic.c:587 kasan_save_free_info kernel/mm/kasan/kasan.h:406 poison_slab_object kernel/mm/kasan/common.c:252 __kasan_slab_free+0x5f/0x80 kernel/mm/kasan/common.c:284 kasan_slab_free kernel/./include/linux/kasan.h:234 slab_free_hook kernel/mm/slub.c:2539 slab_free kernel/mm/slub.c:6630 kfree+0x144/0x700 kernel/mm/slub.c:6837 rcu_do_batch kernel/kernel/rcu/tree.c:2605 rcu_core+0x7c0/0x1500 kernel/kernel/rcu/tree.c:2861 handle_softirqs+0x1ea/0x8a0 kernel/kernel/softirq.c:622 __do_softirq kernel/kernel/softirq.c:656 [...] Commentary: 1. Maher Azzouzi working with Trend Micro Zero Day Initiative was reported as the person who found the issue. I requested to get a proper email to add to the reported-by tag but got no response. For this reason i will credit the person i exchanged emails with i.e [email protected] 2. Neither i nor Victor who did a much more thorough testing was able to reproduce a UAF with the PoC or other approaches we tried. We were both able to reproduce a null ptr deref. After exchange with [email protected] they sent a small change to be made to the code to add an extra delay which was able to simulate the UAF. i.e, this: qdisc_put(q->classes[i].qdisc); mdelay(90); q->classes[i].qdisc = NULL; I was informed by Thomas Gleixner([email protected]) that adding delays was acceptable approach for demonstrating the bug, quote: "Adding such delays is common exploit validation practice" The equivalent delay could happen "by virt scheduling the vCPU out, SMIs, NMIs, PREEMPT_RT enabled kernel" 3. I asked the OP to test and report back but got no response and after a few days gave up and proceeded to submit this fix. Fixes: de6d259 ("net/sched: sch_ets: don't peek at classes beyond 'nbands'") Reported-by: [email protected] Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Davide Caratti <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Clear hca_devcom_comp in device's private data after unregistering it in LAG teardown. Otherwise a slightly lagging second pass through mlx5_unload_one() might try to unregister it again and trip over use-after-free. On s390 almost all PCI level recovery events trigger two passes through mxl5_unload_one() - one through the poll_health() method and one through mlx5_pci_err_detected() as callback from generic PCI error recovery. While testing PCI error recovery paths with more kernel debug features enabled, this issue reproducibly led to kernel panics with the following call chain: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803 ESOP-2 FSI Fault in home space mode while using kernel ASCE. AS:00000000705c4007 R3:0000000000000024 Oops: 0038 ilc:3 [CachyOS#1]SMP CPU: 14 UID: 0 PID: 156 Comm: kmcheck Kdump: loaded Not tainted 6.18.0-20251130.rc7.git0.16131a59cab1.300.fc43.s390x+debug CachyOS#1 PREEMPT Krnl PSW : 0404e00180000000 0000020fc86aa1dc (__lock_acquire+0x5c/0x15f0) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000000 0000020f00000001 6b6b6b6b6b6b6c33 0000000000000000 0000000000000000 0000000000000000 0000000000000001 0000000000000000 0000000000000000 0000020fca28b820 0000000000000000 0000010a1ced8100 0000010a1ced8100 0000020fc9775068 0000018fce14f8b8 0000018fce14f7f8 Krnl Code: 0000020fc86aa1cc: e3b003400004 lg %r11,832 0000020fc86aa1d2: a7840211 brc 8,0000020fc86aa5f4 *0000020fc86aa1d6: c09000df0b25 larl %r9,0000020fca28b820 >0000020fc86aa1dc: d50790002000 clc 0(8,%r9),0(%r2) 0000020fc86aa1e2: a7840209 brc 8,0000020fc86aa5f4 0000020fc86aa1e6: c0e001100401 larl %r14,0000020fca8aa9e8 0000020fc86aa1ec: c01000e25a00 larl %r1,0000020fca2f55ec 0000020fc86aa1f2: a7eb00e8 aghi %r14,232 Call Trace: __lock_acquire+0x5c/0x15f0 lock_acquire.part.0+0xf8/0x270 lock_acquire+0xb0/0x1b0 down_write+0x5a/0x250 mlx5_detach_device+0x42/0x110 [mlx5_core] mlx5_unload_one_devl_locked+0x50/0xc0 [mlx5_core] mlx5_unload_one+0x42/0x60 [mlx5_core] mlx5_pci_err_detected+0x94/0x150 [mlx5_core] zpci_event_attempt_error_recovery+0xcc/0x388 Fixes: 5a977b5 ("net/mlx5: Lag, move devcom registration to LAG layer") Signed-off-by: Gerd Bayer <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Acked-by: Tariq Toukan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

…stats Cited commit added a dedicated mutex (instead of RTNL) to protect the multicast route list, so that it will not change while the driver periodically traverses it in order to update the kernel about multicast route stats that were queried from the device. One instance of list entry deletion (during route replace) was missed and it can result in a use-after-free [1]. Fix by acquiring the mutex before deleting the entry from the list and releasing it afterwards. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum] Read of size 8 at addr ffff8881523c2fa8 by task kworker/2:5/22043 CPU: 2 UID: 0 PID: 22043 Comm: kworker/2:5 Not tainted 6.18.0-rc1-custom-g1a3d6d7cd014 CachyOS#1 PREEMPT(full) Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017 Workqueue: mlxsw_core mlxsw_sp_mr_stats_update [mlxsw_spectrum] Call Trace: <TASK> dump_stack_lvl+0xba/0x110 print_report+0x174/0x4f5 kasan_report+0xdf/0x110 mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 29933: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 mlxsw_sp_mr_route_add+0xd8/0x4770 [mlxsw_spectrum] mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30 Freed by task 29933: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x43/0x70 kfree+0x14e/0x700 mlxsw_sp_mr_route_add+0x2dea/0x4770 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:444 [mlxsw_spectrum] mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30 Fixes: f38656d ("mlxsw: spectrum_mr: Protect multicast route list with a lock") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/f996feecfd59fde297964bfc85040b6d83ec6089.1764695650.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>

Jakub reported an MPTCP deadlock at fallback time: WARNING: possible recursive locking detected 6.18.0-rc7-virtme CachyOS#1 Not tainted -------------------------------------------- mptcp_connect/20858 is trying to acquire lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_try_fallback+0xd8/0x280 but task is already holding lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&msk->fallback_lock); lock(&msk->fallback_lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mptcp_connect/20858: #0: ff1100001da18290 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x114/0x1bc0 CachyOS#1: ff1100001db40fd0 (k-sk_lock-AF_INET#2){+.+.}-{0:0}, at: __mptcp_retrans+0x2cb/0xaa0 CachyOS#2: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 stack backtrace: CPU: 0 UID: 0 PID: 20858 Comm: mptcp_connect Not tainted 6.18.0-rc7-virtme CachyOS#1 PREEMPT(full) Hardware name: Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_deadlock_bug.cold+0xc0/0xcd validate_chain+0x2ff/0x5f0 __lock_acquire+0x34c/0x740 lock_acquire.part.0+0xbc/0x260 _raw_spin_lock_bh+0x38/0x50 __mptcp_try_fallback+0xd8/0x280 mptcp_sendmsg_frag+0x16c2/0x3050 __mptcp_retrans+0x421/0xaa0 mptcp_release_cb+0x5aa/0xa70 release_sock+0xab/0x1d0 mptcp_sendmsg+0xd5b/0x1bc0 sock_write_iter+0x281/0x4d0 new_sync_write+0x3c5/0x6f0 vfs_write+0x65e/0xbb0 ksys_write+0x17e/0x200 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fa5627cbc5e Code: 4d 89 d8 e8 14 bd 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa RSP: 002b:00007fff1fe14700 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa5627cbc5e RDX: 0000000000001f9c RSI: 00007fff1fe16984 RDI: 0000000000000005 RBP: 00007fff1fe14710 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff1fe16920 R13: 0000000000002000 R14: 0000000000001f9c R15: 0000000000001f9c The packet scheduler could attempt a reinjection after receiving an MP_FAIL and before the infinite map has been transmitted, causing a deadlock since MPTCP needs to do the reinjection atomically from WRT fallback. Address the issue explicitly avoiding the reinjection in the critical scenario. Note that this is the only fallback critical section that could potentially send packets and hit the double-lock. Reported-by: Jakub Kicinski <[email protected]> Closes: https://netdev-ctrl.bots.linux.dev/logs/vmksft/mptcp-dbg/results/412720/1-mptcp-join-sh/stderr Fixes: f8a1d9b ("mptcp: make fallback action and fallback decision atomic") Cc: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-4-9e4781a6c1b8@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>

Petr Machata says: ==================== selftests: forwarding: vxlan_bridge_1q_mc_ul: Fix flakiness The net/forwarding/vxlan_bridge_1q_mc_ul selftest runs an overlay traffic, forwarded over a multicast-routed VXLAN underlay. In order to determine whether packets reach their intended destination, it uses a TC match. For convenience, it uses a flower match, which however does not allow matching on the encapsulated packet. So various service traffic ends up being indistinguishable from the test packets, and ends up confusing the test. To alleviate the problem, the test uses sleep to allow the necessary service traffic to run and clear the channel, before running the test traffic. This worked for a while, but lately we have nevertheless seen flakiness of the test in the CI. In this patchset, first generalize tc_rule_stats_get() to support u32 in patch CachyOS#1, then in patch CachyOS#2 convert the test to use u32 to allow parsing deeper into the packet, and in CachyOS#3 drop the now-unnecessary sleep. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Fix a loop scenario of ethx:egress->ethx:egress Example setup to reproduce: tc qdisc add dev ethx root handle 1: drr tc filter add dev ethx parent 1: protocol ip prio 1 matchall \ action mirred egress redirect dev ethx Now ping out of ethx and you get a deadlock: [ 116.892898][ T307] ============================================ [ 116.893182][ T307] WARNING: possible recursive locking detected [ 116.893418][ T307] 6.18.0-rc6-01205-ge05021a829b8-dirty torvalds#204 Not tainted [ 116.893682][ T307] -------------------------------------------- [ 116.893926][ T307] ping/307 is trying to acquire lock: [ 116.894133][ T307] ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.894517][ T307] [ 116.894517][ T307] but task is already holding lock: [ 116.894836][ T307] ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.895252][ T307] [ 116.895252][ T307] other info that might help us debug this: [ 116.895608][ T307] Possible unsafe locking scenario: [ 116.895608][ T307] [ 116.895901][ T307] CPU0 [ 116.896057][ T307] ---- [ 116.896200][ T307] lock(&sch->root_lock_key); [ 116.896392][ T307] lock(&sch->root_lock_key); [ 116.896605][ T307] [ 116.896605][ T307] *** DEADLOCK *** [ 116.896605][ T307] [ 116.896864][ T307] May be due to missing lock nesting notation [ 116.896864][ T307] [ 116.897123][ T307] 6 locks held by ping/307: [ 116.897302][ T307] #0: ffff88800b4b0250 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xb20/0x2cf0 [ 116.897808][ T307] CachyOS#1: ffffffff88c839c0 (rcu_read_lock){....}-{1:3}, at: ip_output+0xa9/0x600 [ 116.898138][ T307] CachyOS#2: ffffffff88c839c0 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0x2c6/0x1ee0 [ 116.898459][ T307] CachyOS#3: ffffffff88c83960 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x200/0x3b50 [ 116.898782][ T307] CachyOS#4: ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.899132][ T307] CachyOS#5: ffffffff88c83960 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x200/0x3b50 [ 116.899442][ T307] [ 116.899442][ T307] stack backtrace: [ 116.899667][ T307] CPU: 2 UID: 0 PID: 307 Comm: ping Not tainted 6.18.0-rc6-01205-ge05021a829b8-dirty torvalds#204 PREEMPT(voluntary) [ 116.899672][ T307] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 116.899675][ T307] Call Trace: [ 116.899678][ T307] <TASK> [ 116.899680][ T307] dump_stack_lvl+0x6f/0xb0 [ 116.899688][ T307] print_deadlock_bug.cold+0xc0/0xdc [ 116.899695][ T307] __lock_acquire+0x11f7/0x1be0 [ 116.899704][ T307] lock_acquire+0x162/0x300 [ 116.899707][ T307] ? __dev_queue_xmit+0x2210/0x3b50 [ 116.899713][ T307] ? srso_alias_return_thunk+0x5/0xfbef5 [ 116.899717][ T307] ? stack_trace_save+0x93/0xd0 [ 116.899723][ T307] _raw_spin_lock+0x30/0x40 [ 116.899728][ T307] ? __dev_queue_xmit+0x2210/0x3b50 [ 116.899731][ T307] __dev_queue_xmit+0x2210/0x3b50 Fixes: 178ca30 ("Revert "net/sched: Fix mirred deadlock on device recursion"") Tested-by: Victor Nogueira <[email protected]> Signed-off-by: Jamal Hadi Salim <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

With the RAPL PMU addition, there is a recursive locking when CPU online callback function calls rapl_package_add_pmu(). Here cpu_hotplug_lock is already acquired by cpuhp_thread_fun() and rapl_package_add_pmu() tries to acquire again. <4>[ 8.197433] ============================================ <4>[ 8.197437] WARNING: possible recursive locking detected <4>[ 8.197440] 6.19.0-rc1-lgci-xe-xe-4242-05b7c58b3367dca84+ CachyOS#1 Not tainted <4>[ 8.197444] -------------------------------------------- <4>[ 8.197447] cpuhp/0/20 is trying to acquire lock: <4>[ 8.197450] ffffffff83487870 (cpu_hotplug_lock){++++}-{0:0}, at: rapl_package_add_pmu+0x37/0x370 [intel_rapl_common] <4>[ 8.197463] but task is already holding lock: <4>[ 8.197466] ffffffff83487870 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x6d/0x290 <4>[ 8.197477] other info that might help us debug this: <4>[ 8.197480] Possible unsafe locking scenario: <4>[ 8.197483] CPU0 <4>[ 8.197485] ---- <4>[ 8.197487] lock(cpu_hotplug_lock); <4>[ 8.197490] lock(cpu_hotplug_lock); <4>[ 8.197493] *** DEADLOCK *** .. .. <4>[ 8.197542] __lock_acquire+0x146e/0x2790 <4>[ 8.197548] lock_acquire+0xc4/0x2c0 <4>[ 8.197550] ? rapl_package_add_pmu+0x37/0x370 [intel_rapl_common] <4>[ 8.197556] cpus_read_lock+0x41/0x110 <4>[ 8.197558] ? rapl_package_add_pmu+0x37/0x370 [intel_rapl_common] <4>[ 8.197561] rapl_package_add_pmu+0x37/0x370 [intel_rapl_common] <4>[ 8.197565] rapl_cpu_online+0x85/0x87 [intel_rapl_msr] <4>[ 8.197568] ? __pfx_rapl_cpu_online+0x10/0x10 [intel_rapl_msr] <4>[ 8.197570] cpuhp_invoke_callback+0x41f/0x6c0 <4>[ 8.197573] ? cpuhp_thread_fun+0x6d/0x290 <4>[ 8.197575] cpuhp_thread_fun+0x1e2/0x290 <4>[ 8.197578] ? smpboot_thread_fn+0x26/0x290 <4>[ 8.197581] smpboot_thread_fn+0x12f/0x290 <4>[ 8.197584] ? __pfx_smpboot_thread_fn+0x10/0x10 <4>[ 8.197586] kthread+0x11f/0x250 <4>[ 8.197589] ? __pfx_kthread+0x10/0x10 <4>[ 8.197592] ret_from_fork+0x344/0x3a0 <4>[ 8.197595] ? __pfx_kthread+0x10/0x10 <4>[ 8.197597] ret_from_fork_asm+0x1a/0x30 <4>[ 8.197604] </TASK> Fix this issue in the same way as rapl powercap package domain is added from the same CPU online callback by introducing another interface which doesn't call cpus_read_lock(). Add rapl_package_add_pmu_locked() and rapl_package_remove_pmu_locked() which don't call cpus_read_lock(). Fixes: 748d6ba ("powercap: intel_rapl: Enable MSR-based RAPL PMU support") Reported-by: Borah, Chaitanya Kumar <[email protected]> Closes: https://lore.kernel.org/linux-pm/[email protected]/T/#u Tested-by: Kuppuswamy Sathyanarayanan <[email protected]> Tested-by: RavitejaX Veesam <[email protected]> Signed-off-by: Srinivas Pandruvada <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Rafael J. Wysocki <[email protected]>

Avoid a possible UAF in GPU recovery due to a race between the sched timeout callback and the tdr work queue. The gpu recovery function calls drm_sched_stop() and later drm_sched_start(). drm_sched_start() restarts the tdr queue which will eventually free the job. If the tdr queue frees the job before time out callback completes, the job will be freed and we'll get a UAF when accessing the pasid. Cache it early to avoid the UAF. Example KASAN trace: [ 493.058141] BUG: KASAN: slab-use-after-free in amdgpu_device_gpu_recover+0x968/0x990 [amdgpu] [ 493.067530] Read of size 4 at addr ffff88b0ce3f794c by task kworker/u128:1/323 [ 493.074892] [ 493.076485] CPU: 9 UID: 0 PID: 323 Comm: kworker/u128:1 Tainted: G E 6.16.0-1289896.2.zuul.bf4f11df81c1410bbe901c4373305a31 CachyOS#1 PREEMPT(voluntary) [ 493.076493] Tainted: [E]=UNSIGNED_MODULE [ 493.076495] Hardware name: TYAN B8021G88V2HR-2T/S8021GM2NR-2T, BIOS V1.03.B10 04/01/2019 [ 493.076500] Workqueue: amdgpu-reset-dev drm_sched_job_timedout [gpu_sched] [ 493.076512] Call Trace: [ 493.076515] <TASK> [ 493.076518] dump_stack_lvl+0x64/0x80 [ 493.076529] print_report+0xce/0x630 [ 493.076536] ? _raw_spin_lock_irqsave+0x86/0xd0 [ 493.076541] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 493.076545] ? amdgpu_device_gpu_recover+0x968/0x990 [amdgpu] [ 493.077253] kasan_report+0xb8/0xf0 [ 493.077258] ? amdgpu_device_gpu_recover+0x968/0x990 [amdgpu] [ 493.077965] amdgpu_device_gpu_recover+0x968/0x990 [amdgpu] [ 493.078672] ? __pfx_amdgpu_device_gpu_recover+0x10/0x10 [amdgpu] [ 493.079378] ? amdgpu_coredump+0x1fd/0x4c0 [amdgpu] [ 493.080111] amdgpu_job_timedout+0x642/0x1400 [amdgpu] [ 493.080903] ? pick_task_fair+0x24e/0x330 [ 493.080910] ? __pfx_amdgpu_job_timedout+0x10/0x10 [amdgpu] [ 493.081702] ? _raw_spin_lock+0x75/0xc0 [ 493.081708] ? __pfx__raw_spin_lock+0x10/0x10 [ 493.081712] drm_sched_job_timedout+0x1b0/0x4b0 [gpu_sched] [ 493.081721] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 493.081725] process_one_work+0x679/0xff0 [ 493.081732] worker_thread+0x6ce/0xfd0 [ 493.081736] ? __pfx_worker_thread+0x10/0x10 [ 493.081739] kthread+0x376/0x730 [ 493.081744] ? __pfx_kthread+0x10/0x10 [ 493.081748] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 493.081751] ? __pfx_kthread+0x10/0x10 [ 493.081755] ret_from_fork+0x247/0x330 [ 493.081761] ? __pfx_kthread+0x10/0x10 [ 493.081764] ret_from_fork_asm+0x1a/0x30 [ 493.081771] </TASK> Fixes: a72002c ("drm/amdgpu: Make use of drm_wedge_task_info") Link: HansKristian-Work/vkd3d-proton#2670 Cc: [email protected] Cc: [email protected] Cc: [email protected] Suggested-by: Matthew Brost <[email protected]> Reviewed-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 20880a3)

kerneltoast added 8 commits September 19, 2023 21:24

mm: Disable proactive compaction by default

a43aaaf

On-demand compaction works fine assuming that you don't have a need to spam the page allocator nonstop for large order page allocations. Signed-off-by: Sultan Alsawaf <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

mm patches #1

mm patches #1

Rasenkai commented Sep 19, 2023

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

mm patches #1

mm patches #1

Conversation

Rasenkai commented Sep 19, 2023

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants