A-A+
最新Xray 快速部署 一键脚本
Xray项目已经确定独自运作，目前最新版是1.1.2版本。根据测试数据，服务端direct+客户端使用splice后性能比VLESS裸奔还要强上一倍，已经远超trojan/trojan-go，非常推荐使用。
本文的Xray一键脚本可以配置常规VMESS协议、VMESS+KCP、VMESS+websocket+TLS+Nginx、VLESS+TCP+XTLS、VLESS+TCP+TLS、trojan、trojan+XTLS等多种组合，支持CentOS 7/8、Ubuntu 16.04、Debian 8及新版系统。
Xray一键脚本使用方法
Xray一键脚本使用步骤如下：
1. 准备一个境外服务器。
如果用VMESS+WS+TLS或者VLESS系列协议，则还需一个域名。对域名没有要求，国内/国外注册的都可以，不需要备案，不会影响使用，也不会带来安全/隐私上的问题。
值得一提的是本Xray一键脚本支持ipv6 only服务器，但是不建议用只有ipv6的VPS用来科学上网。
2. 如果vps运营商开启了防火墙（阿里云、Ucloud、腾讯云、AWS、GCP等商家默认有，搬瓦工/hostdare/vultr等商家默认关闭），请先登录vps管理后台放行80和443端口，否则可能会导致获取证书失败。此外，本脚本支持上传自定义证书，可跳过申请证书这一步，也可用在NAT VPS上。
3. ssh连接到服务器。
4. 复制（或手动输入）下面命令到终端
bash <(curl -sL https://s.hijk.art/xray.sh)
按回车键，将出现如下操作菜单。如果菜单没出现，CentOS系统请输入 yum install -y curl，Ubuntu/Debian系统请输入 sudo apt install -y curl，然后再次运行上面的命令：
Xray一键安装脚本
本Xray一键脚本目前支持以下组合方式：
- VMESS，即最普通的V2ray服务器，没有伪装，也不是VLESS
- VMESS+KCP，传输协议使用mKCP，VPS线路不好时可能有奇效
- VMESS+TCP+TLS，带伪装的V2ray，不能过CDN中转
- VMESS+WS+TLS，即最通用的V2ray伪装方式，能过CDN中转，推荐使用
- VLESS+KCP，传输协议使用mKCP
- VLESS+TCP+TLS，通用的VLESS版本，不能过CDN中转，但比VMESS+TCP+TLS方式性能更好
- VLESS+WS+TLS，基于websocket的V2ray伪装VLESS版本，能过CDN中转，有过CDN情况下推荐使用
- VLESS+TCP+XTLS，目前最强悍的VLESS+XTLS组合，强力推荐使用（但是支持的客户端少一些）
- trojan，轻量级的伪装协议
- trojan+XTLS，trojan加强版，使用XTLS技术来提升性能
注意：目前一些客户端不支持VLESS协议，或者不支持XTLS，请按照自己的情况选择组合
5. 按照自己的需求选择一个方式。例如6，然后回车。接着脚本会让你输入一些信息，也可以直接按回车使用默认值。需要注意的是，对于要输入伪装域名的情况，如果服务器上有网站在运行，请联系运维再执行脚本，否则可能导致原来网站无法访问！
xray一键脚本输入
6. 脚本接下来自动运行，一切顺利的话结束后会输出配置信息：
Xray一键脚本运行成功输出信息
到此服务端配置完毕，服务器可能会自动重启（没提示重启则不需要），windows终端出现“disconnected”，mac出现“closed by remote host”说明服务器成功重启了。
对于VLESS协议、VMESS+WS+TLS的组合，网页上输入伪装域名，能正常打开伪装站，说明服务端已经正确配置好。如果运行过程中出现问题，请在本页面下方查找解决方法或留言。
Xray一键脚本其他事项
服务端配置好后，如果想使用CloudFlare等CDN中转（必须是WS版才可以）；
本脚本默认使用的加速技术是BBR，换成魔改BBR/BBR Plus/锐速清参考：安装魔改BBR/BBR Plus/锐速(Lotserver)。
对于使用TLS的方式，脚本默认会申请域名证书，证书存放在和xray配置文件同一个文件夹内（即/usr/local/etc/xray目录下）。证书会自动更新，如果客户端突然无法使用，请打开伪装网站查看是否能正常打开。如果证书已过期，请再次运行上面的脚本重新配置。
最后，刚搭建好Xray后不要猛上流量，否则会导致被限速、端口被墙，严重可能导致ip被墙。
文章来源：https://v2raytech.com/xray-one-click-script/
xray.sh脚本代码：
#!/bin/bash
# xray一键安装脚本
# Author: hijk<https://hijk.art>
RED="\033[31m" # Error message
GREEN="\033[32m" # Success message
YELLOW="\033[33m" # Warning message
BLUE="\033[36m" # Info message
PLAIN='\033[0m'
# 以下网站是随机从Google上找到的无广告小说网站，不喜欢请改成其他网址，以http或https开头
# 搭建好后无法打开伪装域名，可能是反代小说网站挂了，请在网站留言，或者Github发issue，以便替换新的网站
SITES=(
http://www.zhuizishu.com/
http://xs.56dyc.com/
#http://www.xiaoshuosk.com/
#https://www.quledu.net/
http://www.ddxsku.com/
http://www.biqu6.com/
https://www.wenshulou.cc/
#http://www.auutea.com/
http://www.55shuba.com/
http://www.39shubao.com/
https://www.23xsw.cc/
#https://www.huanbige.com/
https://www.jueshitangmen.info/
https://www.zhetian.org/
http://www.bequgexs.com/
http://www.tjwl.com/
)
CONFIG_FILE="/usr/local/etc/xray/config.json"
OS=`hostnamectl | grep -i system | cut -d: -f2`
V6_PROXY=""
IP=`curl -sL -4 ip.sb`
if [[ "$?" != "0" ]]; then
IP=`curl -sL -6 ip.sb`
V6_PROXY="https://gh.hijk.art/"
fi
BT="false"
NGINX_CONF_PATH="/etc/nginx/conf.d/"
res=`which bt 2>/dev/null`
if [[ "$res" != "" ]]; then
BT="true"
NGINX_CONF_PATH="/www/server/panel/vhost/nginx/"
fi
VLESS="false"
TROJAN="false"
TLS="false"
WS="false"
XTLS="false"
KCP="false"
checkSystem() {
result=$(id | awk '{print $1}')
if [[ $result != "uid=0(root)" ]]; then
colorEcho $RED " 请以root身份执行该脚本"
exit 1
fi
res=`which yum 2>/dev/null`
if [[ "$?" != "0" ]]; then
res=`which apt 2>/dev/null`
if [[ "$?" != "0" ]]; then
colorEcho $RED " 不受支持的Linux系统"
exit 1
fi
PMT="apt"
CMD_INSTALL="apt install -y "
CMD_REMOVE="apt remove -y "
CMD_UPGRADE="apt update; apt upgrade -y; apt autoremove -y"
else
PMT="yum"
CMD_INSTALL="yum install -y "
CMD_REMOVE="yum remove -y "
CMD_UPGRADE="yum update -y"
fi
res=`which systemctl 2>/dev/null`
if [[ "$?" != "0" ]]; then
colorEcho $RED " 系统版本过低，请升级到最新版本"
exit 1
fi
}
colorEcho() {
echo -e "${1}${@:2}${PLAIN}"
}
configNeedNginx() {
local ws=`grep wsSettings $CONFIG_FILE`
if [[ -z "$ws" ]]; then
echo no
return
fi
echo yes
}
needNginx() {
if [[ "$WS" = "false" ]]; then
echo no
return
fi
echo yes
}
status() {
if [[ ! -f /usr/local/bin/xray ]]; then
echo 0
return
fi
if [[ ! -f $CONFIG_FILE ]]; then
echo 1
return
fi
port=`grep port $CONFIG_FILE| head -n 1| cut -d: -f2| tr -d \",' '`
res=`ss -nutlp| grep ${port} | grep -i xray`
if [[ -z "$res" ]]; then
echo 2
return
fi
if [[ `configNeedNginx` != "yes" ]]; then
echo 3
else
res=`ss -nutlp|grep -i nginx`
if [[ -z "$res" ]]; then
echo 4
else
echo 5
fi
fi
}
statusText() {
res=`status`
case $res in
2)
echo -e ${GREEN}已安装${PLAIN} ${RED}未运行${PLAIN}
;;
3)
echo -e ${GREEN}已安装${PLAIN} ${GREEN}Xray正在运行${PLAIN}
;;
4)
echo -e ${GREEN}已安装${PLAIN} ${GREEN}Xray正在运行${PLAIN}, ${RED}Nginx未运行${PLAIN}
;;
5)
echo -e ${GREEN}已安装${PLAIN} ${GREEN}Xray正在运行, Nginx正在运行${PLAIN}
;;
*)
echo -e ${RED}未安装${PLAIN}
;;
esac
}
normalizeVersion() {
if [ -n "$1" ]; then
case "$1" in
v*)
echo "$1"
;;
http*)
echo "v1.4.2"
;;
*)
echo "v$1"
;;
esac
else
echo ""
fi
}
# 1: new Xray. 0: no. 1: yes. 2: not installed. 3: check failed.
getVersion() {
VER=`/usr/local/bin/xray version|head -n1 | awk '{print $2}'`
RETVAL=$?
CUR_VER="$(normalizeVersion "$(echo "$VER" | head -n 1 | cut -d " " -f2)")"
TAG_URL="${V6_PROXY}https://api.github.com/repos/XTLS/Xray-core/releases/latest"
NEW_VER="$(normalizeVersion "$(curl -s "${TAG_URL}" --connect-timeout 10| grep 'tag_name' | cut -d\" -f4)")"
if [[ $? -ne 0 ]] || [[ $NEW_VER == "" ]]; then
colorEcho $RED " 检查Xray版本信息失败，请检查网络"
return 3
elif [[ $RETVAL -ne 0 ]];then
return 2
elif [[ $NEW_VER != $CUR_VER ]];then
return 1
fi
return 0
}
archAffix(){
case "$(uname -m)" in
i686|i386)
echo '32'
;;
x86_64|amd64)
echo '64'
;;
armv5tel)
echo 'arm32-v5'
;;
armv6l)
echo 'arm32-v6'
;;
armv7|armv7l)
echo 'arm32-v7a'
;;
armv8|aarch64)
echo 'arm64-v8a'
;;
mips64le)
echo 'mips64le'
;;
mips64)
echo 'mips64'
;;
mipsle)
echo 'mips32le'
;;
mips)
echo 'mips32'
;;
ppc64le)
echo 'ppc64le'
;;
ppc64)
echo 'ppc64'
;;
ppc64le)
echo 'ppc64le'
;;
riscv64)
echo 'riscv64'
;;
s390x)
echo 's390x'
;;
*)
colorEcho $RED " 不支持的CPU架构！"
exit 1
;;
esac
return 0
}
getData() {
if [[ "$TLS" = "true" || "$XTLS" = "true" ]]; then
echo ""
echo " Xray一键脚本，运行之前请确认如下条件已经具备："
colorEcho ${YELLOW} " 1. 一个伪装域名"
colorEcho ${YELLOW} " 2. 伪装域名DNS解析指向当前服务器ip（${IP}）"
colorEcho ${BLUE} " 3. 如果/root目录下有 xray.pem 和 xray.key 证书密钥文件，无需理会条件2"
echo " "
read -p " 确认满足按y，按其他退出脚本：" answer
if [[ "${answer,,}" != "y" ]]; then
exit 0
fi
echo ""
while true
do
read -p " 请输入伪装域名：" DOMAIN
if [[ -z "${DOMAIN}" ]]; then
colorEcho ${RED} " 域名输入错误，请重新输入！"
else
break
fi
done
DOMAIN=${DOMAIN,,}
colorEcho ${BLUE} " 伪装域名(host)：$DOMAIN"
echo ""
if [[ -f ~/xray.pem && -f ~/xray.key ]]; then
colorEcho ${BLUE} " 检测到自有证书，将使用其部署"
CERT_FILE="/usr/local/etc/xray/${DOMAIN}.pem"
KEY_FILE="/usr/local/etc/xray/${DOMAIN}.key"
else
resolve=`curl -sL https://hijk.art/hostip.php?d=${DOMAIN}`
res=`echo -n ${resolve} | grep ${IP}`
if [[ -z "${res}" ]]; then
colorEcho ${BLUE} "${DOMAIN} 解析结果：${resolve}"
colorEcho ${RED} " 域名未解析到当前服务器IP(${IP})!"
exit 1
fi
fi
fi
echo ""
if [[ "$(needNginx)" = "no" ]]; then
if [[ "$TLS" = "true" ]]; then
read -p " 请输入xray监听端口[强烈建议443，默认443]：" PORT
[[ -z "${PORT}" ]] && PORT=443
else
read -p " 请输入xray监听端口[100-65535的一个数字]：" PORT
[[ -z "${PORT}" ]] && PORT=`shuf -i200-65000 -n1`
if [[ "${PORT:0:1}" = "0" ]]; then
colorEcho ${RED} " 端口不能以0开头"
exit 1
fi
fi
colorEcho ${BLUE} " xray端口：$PORT"
else
read -p " 请输入Nginx监听端口[100-65535的一个数字，默认443]：" PORT
[[ -z "${PORT}" ]] && PORT=443
if [ "${PORT:0:1}" = "0" ]; then
colorEcho ${BLUE} " 端口不能以0开头"
exit 1
fi
colorEcho ${BLUE} " Nginx端口：$PORT"
XPORT=`shuf -i10000-65000 -n1`
fi
if [[ "$KCP" = "true" ]]; then
echo ""
colorEcho $BLUE " 请选择伪装类型："
echo " 1) 无"
echo " 2) BT下载"
echo " 3) 视频通话"
echo " 4) 微信视频通话"
echo " 5) dtls"
echo " 6) wiregard"
read -p " 请选择伪装类型[默认：无]：" answer
case $answer in
2)
HEADER_TYPE="utp"
;;
3)
HEADER_TYPE="srtp"
;;
4)
HEADER_TYPE="wechat-video"
;;
5)
HEADER_TYPE="dtls"
;;
6)
HEADER_TYPE="wireguard"
;;
*)
HEADER_TYPE="none"
;;
esac
colorEcho $BLUE " 伪装类型：$HEADER_TYPE"
SEED=`cat /proc/sys/kernel/random/uuid`
fi
if [[ "$TROJAN" = "true" ]]; then
echo ""
read -p " 请设置trojan密码（不输则随机生成）:" PASSWORD
[[ -z "$PASSWORD" ]] && PASSWORD=`cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w 16 | head -n 1`
colorEcho $BLUE " trojan密码：$PASSWORD"
fi
if [[ "$XTLS" = "true" ]]; then
echo ""
colorEcho $BLUE " 请选择流控模式:"
echo -e " 1) xtls-rprx-direct [$RED推荐$PLAIN]"
echo " 2) xtls-rprx-origin"
read -p " 请选择流控模式[默认:direct]" answer
[[ -z "$answer" ]] && answer=1
case $answer in
1)
FLOW="xtls-rprx-direct"
;;
2)
FLOW="xtls-rprx-origin"
;;
*)
colorEcho $RED " 无效选项，使用默认的xtls-rprx-direct"
FLOW="xtls-rprx-direct"
;;
esac
colorEcho $BLUE " 流控模式：$FLOW"
fi
if [[ "${WS}" = "true" ]]; then
echo ""
while true
do
read -p " 请输入伪装路径，以/开头(不懂请直接回车)：" WSPATH
if [[ -z "${WSPATH}" ]]; then
len=`shuf -i5-12 -n1`
ws=`cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w $len | head -n 1`
WSPATH="/$ws"
break
elif [[ "${WSPATH:0:1}" != "/" ]]; then
colorEcho ${RED} " 伪装路径必须以/开头！"
elif [[ "${WSPATH}" = "/" ]]; then
colorEcho ${RED} " 不能使用根路径！"
else
break
fi
done
colorEcho ${BLUE} " ws路径：$WSPATH"
fi
if [[ "$TLS" = "true" || "$XTLS" = "true" ]]; then
echo ""
colorEcho $BLUE " 请选择伪装站类型:"
echo " 1) 静态网站(位于/usr/share/nginx/html)"
echo " 2) 小说站(随机选择)"
echo " 3) 美女站(https://imeizi.me)"
echo " 4) 高清壁纸站(https://bing.imeizi.me)"
echo " 5) 自定义反代站点(需以http或者https开头)"
read -p " 请选择伪装网站类型[默认:高清壁纸站]" answer
if [[ -z "$answer" ]]; then
PROXY_URL="https://bing.imeizi.me"
else
case $answer in
1)
PROXY_URL=""
;;
2)
len=${#SITES[@]}
((len--))
while true
do
index=`shuf -i0-${len} -n1`
PROXY_URL=${SITES[$index]}
host=`echo ${PROXY_URL} | cut -d/ -f3`
ip=`curl -sL https://hijk.art/hostip.php?d=${host}`
res=`echo -n ${ip} | grep ${host}`
if [[ "${res}" = "" ]]; then
echo "$ip $host" >> /etc/hosts
break
fi
done
;;
3)
PROXY_URL="https://imeizi.me"
;;
4)
PROXY_URL="https://bing.imeizi.me"
;;
5)
read -p " 请输入反代站点(以http或者https开头)：" PROXY_URL
if [[ -z "$PROXY_URL" ]]; then
colorEcho $RED " 请输入反代网站！"
exit 1
elif [[ "${PROXY_URL:0:4}" != "http" ]]; then
colorEcho $RED " 反代网站必须以http或https开头！"
exit 1
fi
;;
*)
colorEcho $RED " 请输入正确的选项！"
exit 1
esac
fi
REMOTE_HOST=`echo ${PROXY_URL} | cut -d/ -f3`
colorEcho $BLUE " 伪装网站：$PROXY_URL"
echo ""
colorEcho $BLUE " 是否允许搜索引擎爬取网站？[默认：不允许]"
echo " y)允许，会有更多ip请求网站，但会消耗一些流量，vps流量充足情况下推荐使用"
echo " n)不允许，爬虫不会访问网站，访问ip比较单一，但能节省vps流量"
read -p " 请选择：[y/n]" answer
if [[ -z "$answer" ]]; then
ALLOW_SPIDER="n"
elif [[ "${answer,,}" = "y" ]]; then
ALLOW_SPIDER="y"
else
ALLOW_SPIDER="n"
fi
colorEcho $BLUE " 允许搜索引擎：$ALLOW_SPIDER"
fi
echo ""
read -p " 是否安装BBR(默认安装)?[y/n]:" NEED_BBR
[[ -z "$NEED_BBR" ]] && NEED_BBR=y
[[ "$NEED_BBR" = "Y" ]] && NEED_BBR=y
colorEcho $BLUE " 安装BBR：$NEED_BBR"
}
installNginx() {
echo ""
colorEcho $BLUE " 安装nginx..."
if [[ "$BT" = "false" ]]; then
if [[ "$PMT" = "yum" ]]; then
$CMD_INSTALL epel-release
if [[ "$?" != "0" ]]; then
echo '[nginx-stable]
name=nginx stable repo
baseurl=http://nginx.org/packages/centos/$releasever/$basearch/
gpgcheck=1
enabled=1
gpgkey=https://nginx.org/keys/nginx_signing.key
module_hotfixes=true' > /etc/yum.repos.d/nginx.repo
fi
fi
$CMD_INSTALL nginx
if [[ "$?" != "0" ]]; then
colorEcho $RED " Nginx安装失败，请到 https://hijk.art 反馈"
exit 1
fi
systemctl enable nginx
else
res=`which nginx 2>/dev/null`
if [[ "$?" != "0" ]]; then
colorEcho $RED " 您安装了宝塔，请在宝塔后台安装nginx后再运行本脚本"
exit 1
fi
fi
}
startNginx() {
if [[ "$BT" = "false" ]]; then
systemctl start nginx
else
nginx -c /www/server/nginx/conf/nginx.conf
fi
}
stopNginx() {
if [[ "$BT" = "false" ]]; then
systemctl stop nginx
else
res=`ps aux | grep -i nginx`
if [[ "$res" != "" ]]; then
nginx -s stop
fi
fi
}
getCert() {
mkdir -p /usr/local/etc/xray
if [[ -z ${CERT_FILE+x} ]]; then
stopNginx
systemctl stop xray
res=`netstat -ntlp| grep -E ':80 |:443 '`
if [[ "${res}" != "" ]]; then
colorEcho ${RED} " 其他进程占用了80或443端口，请先关闭再运行一键脚本"
echo " 端口占用信息如下："
echo ${res}
exit 1
fi
$CMD_INSTALL socat openssl
if [[ "$PMT" = "yum" ]]; then
$CMD_INSTALL cronie
systemctl start crond
systemctl enable crond
else
$CMD_INSTALL cron
systemctl start cron
systemctl enable cron
fi
curl -sL https://get.acme.sh | sh -s [email protected]
source ~/.bashrc
~/.acme.sh/acme.sh --upgrade --auto-upgrade
~/.acme.sh/acme.sh --set-default-ca --server letsencrypt
if [[ "$BT" = "false" ]]; then
~/.acme.sh/acme.sh --issue -d $DOMAIN --keylength ec-256 --pre-hook "systemctl stop nginx" --post-hook "systemctl restart nginx" --standalone
else
~/.acme.sh/acme.sh --issue -d $DOMAIN --keylength ec-256 --pre-hook "nginx -s stop || { echo -n ''; }" --post-hook "nginx -c /www/server/nginx/conf/nginx.conf || { echo -n ''; }" --standalone
fi
[[ -f ~/.acme.sh/${DOMAIN}_ecc/ca.cer ]] || {
colorEcho $RED " 获取证书失败，请复制上面的红色文字到 https://hijk.art 反馈"
exit 1
}
CERT_FILE="/usr/local/etc/xray/${DOMAIN}.pem"
KEY_FILE="/usr/local/etc/xray/${DOMAIN}.key"
~/.acme.sh/acme.sh --install-cert -d $DOMAIN --ecc \
--key-file $KEY_FILE \
--fullchain-file $CERT_FILE \
--reloadcmd "service nginx force-reload"
[[ -f $CERT_FILE && -f $KEY_FILE ]] || {
colorEcho $RED " 获取证书失败，请到 https://hijk.art 反馈"
exit 1
}
else
cp ~/xray.pem /usr/local/etc/xray/${DOMAIN}.pem
cp ~/xray.key /usr/local/etc/xray/${DOMAIN}.key
fi
}
configNginx() {
mkdir -p /usr/share/nginx/html;
if [[ "$ALLOW_SPIDER" = "n" ]]; then
echo 'User-Agent: *' > /usr/share/nginx/html/robots.txt
echo 'Disallow: /' >> /usr/share/nginx/html/robots.txt
ROBOT_CONFIG=" location = /robots.txt {}"
else
ROBOT_CONFIG=""
fi
if [[ "$BT" = "false" ]]; then
if [[ ! -f /etc/nginx/nginx.conf.bak ]]; then
mv /etc/nginx/nginx.conf /etc/nginx/nginx.conf.bak
fi
res=`id nginx 2>/dev/null`
if [[ "$?" != "0" ]]; then
user="www-data"
else
user="nginx"
fi
cat > /etc/nginx/nginx.conf<<-EOF
user $user;
worker_processes auto;
error_log /var/log/nginx/error.log;
pid /run/nginx.pid;
# Load dynamic modules. See /usr/share/doc/nginx/README.dynamic.
include /usr/share/nginx/modules/*.conf;
events {
worker_connections 1024;
}
http {
log_format main '\$remote_addr - \$remote_user [\$time_local] "\$request" '
'\$status \$body_bytes_sent "\$http_referer" '
'"\$http_user_agent" "\$http_x_forwarded_for"';
access_log /var/log/nginx/access.log main;
server_tokens off;
sendfile on;
tcp_nopush on;
tcp_nodelay on;
keepalive_timeout 65;
types_hash_max_size 2048;
gzip on;
include /etc/nginx/mime.types;
default_type application/octet-stream;
# Load modular configuration files from the /etc/nginx/conf.d directory.
# See http://nginx.org/en/docs/ngx_core_module.html#include
# for more information.
include /etc/nginx/conf.d/*.conf;
}
EOF
fi
if [[ "$PROXY_URL" = "" ]]; then
action=""
else
action="proxy_ssl_server_name on;
proxy_pass $PROXY_URL;
proxy_set_header Accept-Encoding '';
sub_filter \"$REMOTE_HOST\" \"$DOMAIN\";
sub_filter_once off;"
fi
if [[ "$TLS" = "true" || "$XTLS" = "true" ]]; then
mkdir -p ${NGINX_CONF_PATH}
# VMESS+WS+TLS
# VLESS+WS+TLS
if [[ "$WS" = "true" ]]; then
cat > ${NGINX_CONF_PATH}${DOMAIN}.conf<<-EOF
server {
listen 80;
listen [::]:80;
server_name ${DOMAIN};
return 301 https://\$server_name:${PORT}\$request_uri;
}
server {
listen ${PORT} ssl http2;
listen [::]:${PORT} ssl http2;
server_name ${DOMAIN};
charset utf-8;
# ssl配置
ssl_protocols TLSv1.1 TLSv1.2;
ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE:ECDH:AES:HIGH:!NULL:!aNULL:!MD5:!ADH:!RC4;
ssl_ecdh_curve secp384r1;
ssl_prefer_server_ciphers on;
ssl_session_cache shared:SSL:10m;
ssl_session_timeout 10m;
ssl_session_tickets off;
ssl_certificate $CERT_FILE;
ssl_certificate_key $KEY_FILE;
root /usr/share/nginx/html;
location / {
$action
}
$ROBOT_CONFIG
location ${WSPATH} {
proxy_redirect off;
proxy_pass http://127.0.0.1:${XPORT};
proxy_http_version 1.1;
proxy_set_header Upgrade \$http_upgrade;
proxy_set_header Connection "upgrade";
proxy_set_header Host \$host;
proxy_set_header X-Real-IP \$remote_addr;
proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for;
}
}
EOF
else
# VLESS+TCP+TLS
# VLESS+TCP+XTLS
# trojan
cat > ${NGINX_CONF_PATH}${DOMAIN}.conf<<-EOF
server {
listen 80;
listen [::]:80;
listen 81 http2;
server_name ${DOMAIN};
root /usr/share/nginx/html;
location / {
$action
}
$ROBOT_CONFIG
}
EOF
fi
fi
}
setSelinux() {
if [[ -s /etc/selinux/config ]] && grep 'SELINUX=enforcing' /etc/selinux/config; then
sed -i 's/SELINUX=enforcing/SELINUX=permissive/g' /etc/selinux/config
setenforce 0
fi
}
setFirewall() {
res=`which firewall-cmd 2>/dev/null`
if [[ $? -eq 0 ]]; then
systemctl status firewalld > /dev/null 2>&1
if [[ $? -eq 0 ]];then
firewall-cmd --permanent --add-service=http
firewall-cmd --permanent --add-service=https
if [[ "$PORT" != "443" ]]; then
firewall-cmd --permanent --add-port=${PORT}/tcp
firewall-cmd --permanent --add-port=${PORT}/udp
fi
firewall-cmd --reload
else
nl=`iptables -nL | nl | grep FORWARD | awk '{print $1}'`
if [[ "$nl" != "3" ]]; then
iptables -I INPUT -p tcp --dport 80 -j ACCEPT
iptables -I INPUT -p tcp --dport 443 -j ACCEPT
if [[ "$PORT" != "443" ]]; then
iptables -I INPUT -p tcp --dport ${PORT} -j ACCEPT
iptables -I INPUT -p udp --dport ${PORT} -j ACCEPT
fi
fi
fi
else
res=`which iptables 2>/dev/null`
if [[ $? -eq 0 ]]; then
nl=`iptables -nL | nl | grep FORWARD | awk '{print $1}'`
if [[ "$nl" != "3" ]]; then
iptables -I INPUT -p tcp --dport 80 -j ACCEPT
iptables -I INPUT -p tcp --dport 443 -j ACCEPT
if [[ "$PORT" != "443" ]]; then
iptables -I INPUT -p tcp --dport ${PORT} -j ACCEPT
iptables -I INPUT -p udp --dport ${PORT} -j ACCEPT
fi
fi
else
res=`which ufw 2>/dev/null`
if [[ $? -eq 0 ]]; then
res=`ufw status | grep -i inactive`
if [[ "$res" = "" ]]; then
ufw allow http/tcp
ufw allow https/tcp
if [[ "$PORT" != "443" ]]; then
ufw allow ${PORT}/tcp
ufw allow ${PORT}/udp
fi
fi
fi
fi
fi
}
installBBR() {
if [[ "$NEED_BBR" != "y" ]]; then
INSTALL_BBR=false
return
fi
result=$(lsmod | grep bbr)
if [[ "$result" != "" ]]; then
colorEcho $BLUE " BBR模块已安装"
INSTALL_BBR=false
return
fi
res=`hostnamectl | grep -i openvz`
if [[ "$res" != "" ]]; then
colorEcho $BLUE " openvz机器，跳过安装"
INSTALL_BBR=false
return
fi
echo "net.core.default_qdisc=fq" >> /etc/sysctl.conf
echo "net.ipv4.tcp_congestion_control=bbr" >> /etc/sysctl.conf
sysctl -p
result=$(lsmod | grep bbr)
if [[ "$result" != "" ]]; then
colorEcho $GREEN " BBR模块已启用"
INSTALL_BBR=false
return
fi
colorEcho $BLUE " 安装BBR模块..."
if [[ "$PMT" = "yum" ]]; then
if [[ "$V6_PROXY" = "" ]]; then
rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-4.el7.elrepo.noarch.rpm
$CMD_INSTALL --enablerepo=elrepo-kernel kernel-ml
$CMD_REMOVE kernel-3.*
grub2-set-default 0
echo "tcp_bbr" >> /etc/modules-load.d/modules.conf
INSTALL_BBR=true
fi
else
$CMD_INSTALL --install-recommends linux-generic-hwe-16.04
grub-set-default 0
echo "tcp_bbr" >> /etc/modules-load.d/modules.conf
INSTALL_BBR=true
fi
}
installXray() {
rm -rf /tmp/xray
mkdir -p /tmp/xray
DOWNLOAD_LINK="${V6_PROXY}https://github.com/XTLS/Xray-core/releases/download/${NEW_VER}/Xray-linux-$(archAffix).zip"
colorEcho $BLUE " 下载Xray: ${DOWNLOAD_LINK}"
curl -L -H "Cache-Control: no-cache" -o /tmp/xray/xray.zip ${DOWNLOAD_LINK}
if [ $? != 0 ];then
colorEcho $RED " 下载Xray文件失败，请检查服务器网络设置"
exit 1
fi
systemctl stop xray
mkdir -p /usr/local/etc/xray /usr/local/share/xray && \
unzip /tmp/xray/xray.zip -d /tmp/xray
cp /tmp/xray/xray /usr/local/bin
cp /tmp/xray/geo* /usr/local/share/xray
chmod +x /usr/local/bin/xray || {
colorEcho $RED " Xray安装失败"
exit 1
}
cat >/etc/systemd/system/xray.service<<-EOF
[Unit]
Description=Xray Service
Documentation=https://github.com/xtls https://hijk.art
After=network.target nss-lookup.target
[Service]
User=root
#User=nobody
#CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
#AmbientCapabilities=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
NoNewPrivileges=true
ExecStart=/usr/local/bin/xray run -config /usr/local/etc/xray/config.json
Restart=on-failure
RestartPreventExitStatus=23
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl enable xray.service
}
trojanConfig() {
cat > $CONFIG_FILE<<-EOF
{
"inbounds": [{
"port": $PORT,
"protocol": "trojan",
"settings": {
"clients": [
{
"password": "$PASSWORD"
}
],
"fallbacks": [
{
"alpn": "http/1.1",
"dest": 80
},
{
"alpn": "h2",
"dest": 81
}
]
},
"streamSettings": {
"network": "tcp",
"security": "tls",
"tlsSettings": {
"serverName": "$DOMAIN",
"alpn": ["http/1.1", "h2"],
"certificates": [
{
"certificateFile": "$CERT_FILE",
"keyFile": "$KEY_FILE"
}
]
}
}
}],
"outbounds": [{
"protocol": "freedom",
"settings": {}
},{
"protocol": "blackhole",
"settings": {},
"tag": "blocked"
}],
"routing": {
"rules": [
{
"type": "field",
"ip": ["geoip:private"],
"outboundTag": "blocked"
}
]
}
}
EOF
}
trojanXTLSConfig() {
cat > $CONFIG_FILE<<-EOF
{
"inbounds": [{
"port": $PORT,
"protocol": "trojan",
"settings": {
"clients": [
{
"password": "$PASSWORD",
"flow": "$FLOW"
}
],
"fallbacks": [
{
"alpn": "http/1.1",
"dest": 80
},
{
"alpn": "h2",
"dest": 81
}
]
},
"streamSettings": {
"network": "tcp",
"security": "xtls",
"xtlsSettings": {
"serverName": "$DOMAIN",
"alpn": ["http/1.1", "h2"],
"certificates": [
{
"certificateFile": "$CERT_FILE",
"keyFile": "$KEY_FILE"
}
]
}
}
}],
"outbounds": [{
"protocol": "freedom",
"settings": {}
},{
"protocol": "blackhole",
"settings": {},
"tag": "blocked"
}],
"routing": {
"rules": [
{
"type": "field",
"ip": ["geoip:private"],
"outboundTag": "blocked"
}
]
}
}
EOF
}
vmessConfig() {
local uuid="$(cat '/proc/sys/kernel/random/uuid')"
local alterid=`shuf -i50-80 -n1`
cat > $CONFIG_FILE<<-EOF
{
"inbounds": [{
"port": $PORT,
"protocol": "vmess",
"settings": {
"clients": [
{
"id": "$uuid",
"level": 1,
"alterId": $alterid
}
]
}
}],
"outbounds": [{
"protocol": "freedom",
"settings": {}
},{
"protocol": "blackhole",
"settings": {},
"tag": "blocked"
}],
"routing": {
"rules": [
{
"type": "field",
"ip": ["geoip:private"],
"outboundTag": "blocked"
}
]
}
}
EOF
}
vmessKCPConfig() {
local uuid="$(cat '/proc/sys/kernel/random/uuid')"
local alterid=`shuf -i50-80 -n1`
cat > $CONFIG_FILE<<-EOF
{
"inbounds": [{
"port": $PORT,
"protocol": "vmess",
"settings": {
"clients": [
{
"id": "$uuid",
"level": 1,
"alterId": $alterid
}
]
},
"streamSettings": {
"network": "mkcp",
"kcpSettings": {
"uplinkCapacity": 100,
"downlinkCapacity": 100,
"congestion": true,
"header": {
"type": "$HEADER_TYPE"
},
"seed": "$SEED"
}
}
}],
"outbounds": [{
"protocol": "freedom",
"settings": {}
},{
"protocol": "blackhole",
"settings": {},
"tag": "blocked"
}],
"routing": {
"rules": [
{
"type": "field",
"ip": ["geoip:private"],
"outboundTag": "blocked"
}
]
}
}
EOF
}
vmessTLSConfig() {
local uuid="$(cat '/proc/sys/kernel/random/uuid')"
cat > $CONFIG_FILE<<-EOF
{
"inbounds": [{
"port": $PORT,
"protocol": "vmess",
"settings": {
"clients": [
{
"id": "$uuid",
"level": 1,
"alterId": 0
}
],
"disableInsecureEncryption": false
},
"streamSettings": {
"network": "tcp",
"security": "tls",
"tlsSettings": {
"serverName": "$DOMAIN",
"alpn": ["http/1.1", "h2"],
"certificates": [
{
"certificateFile": "$CERT_FILE",
"keyFile": "$KEY_FILE"
}
]
}
}
}],
"outbounds": [{
"protocol": "freedom",
"settings": {}
},{
"protocol": "blackhole",
"settings": {},
"tag": "blocked"
}],
"routing": {
"rules": [
{
"type": "field",
"ip": ["geoip:private"],
"outboundTag": "blocked"
}
]
}
}
EOF
}
vmessWSConfig() {
local uuid="$(cat '/proc/sys/kernel/random/uuid')"
cat > $CONFIG_FILE<<-EOF
{
"inbounds": [{
"port": $XPORT,
"listen": "127.0.0.1",
"protocol": "vmess",
"settings": {
"clients": [
{
"id": "$uuid",
"level": 1,
"alterId": 0
}
],
"disableInsecureEncryption": false
},
"streamSettings": {
"network": "ws",
"wsSettings": {
"path": "$WSPATH",
"headers": {
"Host": "$DOMAIN"
}
}
}
}],
"outbounds": [{
"protocol": "freedom",
"settings": {}
},{
"protocol": "blackhole",
"settings": {},
"tag": "blocked"
}],
"routing": {
"rules": [
{
"type": "field",
"ip": ["geoip:private"],
"outboundTag": "blocked"
}
]
}
}
EOF
}
vlessTLSConfig() {
local uuid="$(cat '/proc/sys/kernel/random/uuid')"
cat > $CONFIG_FILE<<-EOF
{
"inbounds": [{
"port": $PORT,
"protocol": "vless",
"settings": {
"clients": [
{
"id": "$uuid",
"level": 0
}
],
"decryption": "none",
"fallbacks": [
{
"alpn": "http/1.1",
"dest": 80
},
{
"alpn": "h2",
"dest": 81
}
]
},
"streamSettings": {
"network": "tcp",
"security": "tls",
"tlsSettings": {
"serverName": "$DOMAIN",
"alpn": ["http/1.1", "h2"],
"certificates": [
{
"certificateFile": "$CERT_FILE",
"keyFile": "$KEY_FILE"
}
]
}
}
}],
"outbounds": [{
"protocol": "freedom",
"settings": {}
},{
"protocol": "blackhole",
"settings": {},
"tag": "blocked"
}],
"routing": {
"rules": [
{
"type": "field",
"ip": ["geoip:private"],
"outboundTag": "blocked"
}
]
}
}
EOF
}
vlessXTLSConfig() {
local uuid="$(cat '/proc/sys/kernel/random/uuid')"
cat > $CONFIG_FILE<<-EOF
{
"inbounds": [{
"port": $PORT,
"protocol": "vless",
"settings": {
"clients": [
{
"id": "$uuid",
"flow": "$FLOW",
"level": 0
}
],
"decryption": "none",
"fallbacks": [
{
"alpn": "http/1.1",
"dest": 80
},
{
"alpn": "h2",
"dest": 81
}
]
},
"streamSettings": {
"network": "tcp",
"security": "xtls",
"xtlsSettings": {
"serverName": "$DOMAIN",
"alpn": ["http/1.1", "h2"],
"certificates": [
{
"certificateFile": "$CERT_FILE",
"keyFile": "$KEY_FILE"
}
]
}
}
}],
"outbounds": [{
"protocol": "freedom",
"settings": {}
},{
"protocol": "blackhole",
"settings": {},
"tag": "blocked"
}],
"routing": {
"rules": [
{
"type": "field",
"ip": ["geoip:private"],
"outboundTag": "blocked"
}
]
}
}
EOF
}
vlessWSConfig() {
local uuid="$(cat '/proc/sys/kernel/random/uuid')"
cat > $CONFIG_FILE<<-EOF
{
"inbounds": [{
"port": $XPORT,
"listen": "127.0.0.1",
"protocol": "vless",
"settings": {
"clients": [
{
"id": "$uuid",
"level": 0
}
],
"decryption": "none"
},
"streamSettings": {
"network": "ws",
"security": "none",
"wsSettings": {
"path": "$WSPATH",
"headers": {
"Host": "$DOMAIN"
}
}
}
}],
"outbounds": [{
"protocol": "freedom",
"settings": {}
},{
"protocol": "blackhole",
"settings": {},
"tag": "blocked"
}],
"routing": {
"rules": [
{
"type": "field",
"ip": ["geoip:private"],
"outboundTag": "blocked"
}
]
}
}
EOF
}
vlessKCPConfig() {
local uuid="$(cat '/proc/sys/kernel/random/uuid')"
cat > $CONFIG_FILE<<-EOF
{
"inbounds": [{
"port": $PORT,
"protocol": "vless",
"settings": {
"clients": [
{
"id": "$uuid",
"level": 0
}
],
"decryption": "none"
},
"streamSettings": {
"streamSettings": {
"network": "mkcp",
"kcpSettings": {
"uplinkCapacity": 100,
"downlinkCapacity": 100,
"congestion": true,
"header": {
"type": "$HEADER_TYPE"
},
"seed": "$SEED"
}
}
}
}],
"outbounds": [{
"protocol": "freedom",
"settings": {}
},{
"protocol": "blackhole",
"settings": {},
"tag": "blocked"
}],
"routing": {
"rules": [
{
"type": "field",
"ip": ["geoip:private"],
"outboundTag": "blocked"
}
]
}
}
EOF
}
configXray() {
mkdir -p /usr/local/xray
if [[ "$TROJAN" = "true" ]]; then
if [[ "$XTLS" = "true" ]]; then
trojanXTLSConfig
else
trojanConfig
fi
return 0
fi
if [[ "$VLESS" = "false" ]]; then
# VMESS + kcp
if [[ "$KCP" = "true" ]]; then
vmessKCPConfig
return 0
fi
# VMESS
if [[ "$TLS" = "false" ]]; then
vmessConfig
elif [[ "$WS" = "false" ]]; then
# VMESS+TCP+TLS
vmessTLSConfig
# VMESS+WS+TLS
else
vmessWSConfig
fi
#VLESS
else
if [[ "$KCP" = "true" ]]; then
vlessKCPConfig
return 0
fi
# VLESS+TCP
if [[ "$WS" = "false" ]]; then
# VLESS+TCP+TLS
if [[ "$XTLS" = "false" ]]; then
vlessTLSConfig
# VLESS+TCP+XTLS
else
vlessXTLSConfig
fi
# VLESS+WS+TLS
else
vlessWSConfig
fi
fi
}
install() {
getData
$PMT clean all
[[ "$PMT" = "apt" ]] && $PMT update
#echo $CMD_UPGRADE | bash
$CMD_INSTALL wget vim unzip tar gcc openssl
$CMD_INSTALL net-tools
if [[ "$PMT" = "apt" ]]; then
$CMD_INSTALL libssl-dev g++
fi
res=`which unzip 2>/dev/null`
if [[ $? -ne 0 ]]; then
colorEcho $RED " unzip安装失败，请检查网络"
exit 1
fi
installNginx
setFirewall
if [[ "$TLS" = "true" || "$XTLS" = "true" ]]; then
getCert
fi
configNginx
colorEcho $BLUE " 安装Xray..."
getVersion
RETVAL="$?"
if [[ $RETVAL == 0 ]]; then
colorEcho $BLUE " Xray最新版 ${CUR_VER} 已经安装"
elif [[ $RETVAL == 3 ]]; then
exit 1
else
colorEcho $BLUE " 安装Xray ${NEW_VER} ，架构$(archAffix)"
installXray
fi
configXray
setSelinux
installBBR
start
showInfo
bbrReboot
}
bbrReboot() {
if [[ "${INSTALL_BBR}" == "true" ]]; then
echo
echo " 为使BBR模块生效，系统将在30秒后重启"
echo
echo -e " 您可以按 ctrl + c 取消重启，稍后输入 ${RED}reboot${PLAIN} 重启系统"
sleep 30
reboot
fi
}
update() {
res=`status`
if [[ $res -lt 2 ]]; then
colorEcho $RED " Xray未安装，请先安装！"
return
fi
getVersion
RETVAL="$?"
if [[ $RETVAL == 0 ]]; then
colorEcho $BLUE " Xray最新版 ${CUR_VER} 已经安装"
elif [[ $RETVAL == 3 ]]; then
exit 1
else
colorEcho $BLUE " 安装Xray ${NEW_VER} ，架构$(archAffix)"
installXray
stop
start
colorEcho $GREEN " 最新版Xray安装成功！"
fi
}
uninstall() {
res=`status`
if [[ $res -lt 2 ]]; then
colorEcho $RED " Xray未安装，请先安装！"
return
fi
echo ""
read -p " 确定卸载Xray？[y/n]：" answer
if [[ "${answer,,}" = "y" ]]; then
domain=`grep Host $CONFIG_FILE | cut -d: -f2 | tr -d \",' '`
if [[ "$domain" = "" ]]; then
domain=`grep serverName $CONFIG_FILE | cut -d: -f2 | tr -d \",' '`
fi
stop
systemctl disable xray
rm -rf /etc/systemd/system/xray.service
rm -rf /usr/local/bin/xray
rm -rf /usr/local/etc/xray
if [[ "$BT" = "false" ]]; then
systemctl disable nginx
$CMD_REMOVE nginx
if [[ "$PMT" = "apt" ]]; then
$CMD_REMOVE nginx-common
fi
rm -rf /etc/nginx/nginx.conf
if [[ -f /etc/nginx/nginx.conf.bak ]]; then
mv /etc/nginx/nginx.conf.bak /etc/nginx/nginx.conf
fi
fi
if [[ "$domain" != "" ]]; then
rm -rf ${NGINX_CONF_PATH}${domain}.conf
fi
[[ -f ~/.acme.sh/acme.sh ]] && ~/.acme.sh/acme.sh --uninstall
colorEcho $GREEN " Xray卸载成功"
fi
}
start() {
res=`status`
if [[ $res -lt 2 ]]; then
colorEcho $RED " Xray未安装，请先安装！"
return
fi
stopNginx
startNginx
systemctl restart xray
sleep 2
port=`grep port $CONFIG_FILE| head -n 1| cut -d: -f2| tr -d \",' '`
res=`ss -nutlp| grep ${port} | grep -i xray`
if [[ "$res" = "" ]]; then
colorEcho $RED " Xray启动失败，请检查日志或查看端口是否被占用！"
else
colorEcho $BLUE " Xray启动成功"
fi
}
stop() {
stopNginx
systemctl stop xray
colorEcho $BLUE " Xray停止成功"
}
restart() {
res=`status`
if [[ $res -lt 2 ]]; then
colorEcho $RED " Xray未安装，请先安装！"
return
fi
stop
start
}
getConfigFileInfo() {
vless="false"
tls="false"
ws="false"
xtls="false"
trojan="false"
protocol="VMess"
kcp="false"
uid=`grep id $CONFIG_FILE | head -n1| cut -d: -f2 | tr -d \",' '`
alterid=`grep alterId $CONFIG_FILE | cut -d: -f2 | tr -d \",' '`
network=`grep network $CONFIG_FILE | tail -n1| cut -d: -f2 | tr -d \",' '`
[[ -z "$network" ]] && network="tcp"
domain=`grep serverName $CONFIG_FILE | cut -d: -f2 | tr -d \",' '`
if [[ "$domain" = "" ]]; then
domain=`grep Host $CONFIG_FILE | cut -d: -f2 | tr -d \",' '`
if [[ "$domain" != "" ]]; then
ws="true"
tls="true"
wspath=`grep path $CONFIG_FILE | cut -d: -f2 | tr -d \",' '`
fi
else
tls="true"
fi
if [[ "$ws" = "true" ]]; then
port=`grep -i ssl $NGINX_CONF_PATH${domain}.conf| head -n1 | awk '{print $2}'`
else
port=`grep port $CONFIG_FILE | cut -d: -f2 | tr -d \",' '`
fi
res=`grep -i kcp $CONFIG_FILE`
if [[ "$res" != "" ]]; then
kcp="true"
type=`grep header -A 3 $CONFIG_FILE | grep 'type' | cut -d: -f2 | tr -d \",' '`
seed=`grep seed $CONFIG_FILE | cut -d: -f2 | tr -d \",' '`
fi
vmess=`grep vmess $CONFIG_FILE`
if [[ "$vmess" = "" ]]; then
trojan=`grep trojan $CONFIG_FILE`
if [[ "$trojan" = "" ]]; then
vless="true"
protocol="VLESS"
else
trojan="true"
password=`grep password $CONFIG_FILE | cut -d: -f2 | tr -d \",' '`
protocol="trojan"
fi
tls="true"
encryption="none"
xtls=`grep xtlsSettings $CONFIG_FILE`
if [[ "$xtls" != "" ]]; then
xtls="true"
flow=`grep flow $CONFIG_FILE | cut -d: -f2 | tr -d \",' '`
else
flow="无"
fi
fi
}
outputVmess() {
raw="{
\"v\":\"2\",
\"ps\":\"\",
\"add\":\"$IP\",
\"port\":\"${port}\",
\"id\":\"${uid}\",
\"aid\":\"$alterid\",
\"net\":\"tcp\",
\"type\":\"none\",
\"host\":\"\",
\"path\":\"\",
\"tls\":\"\"
}"
link=`echo -n ${raw} | base64 -w 0`
link="vmess://${link}"
echo -e " ${BLUE}IP(address): ${PLAIN} ${RED}${IP}${PLAIN}"
echo -e " ${BLUE}端口(port)：${PLAIN}${RED}${port}${PLAIN}"
echo -e " ${BLUE}id(uuid)：${PLAIN}${RED}${uid}${PLAIN}"
echo -e " ${BLUE}额外id(alterid)：${PLAIN} ${RED}${alterid}${PLAIN}"
echo -e " ${BLUE}加密方式(security)：${PLAIN} ${RED}auto${PLAIN}"
echo -e " ${BLUE}传输协议(network)：${PLAIN} ${RED}${network}${PLAIN}"
echo
echo -e " ${BLUE}vmess链接:${PLAIN} $RED$link$PLAIN"
}
outputVmessKCP() {
echo -e " ${BLUE}IP(address): ${PLAIN} ${RED}${IP}${PLAIN}"
echo -e " ${BLUE}端口(port)：${PLAIN}${RED}${port}${PLAIN}"
echo -e " ${BLUE}id(uuid)：${PLAIN}${RED}${uid}${PLAIN}"
echo -e " ${BLUE}额外id(alterid)：${PLAIN} ${RED}${alterid}${PLAIN}"
echo -e " ${BLUE}加密方式(security)：${PLAIN} ${RED}auto${PLAIN}"
echo -e " ${BLUE}传输协议(network)：${PLAIN} ${RED}${network}${PLAIN}"
echo -e " ${BLUE}伪装类型(type)：${PLAIN} ${RED}${type}${PLAIN}"
echo -e " ${BLUE}mkcp seed：${PLAIN} ${RED}${seed}${PLAIN}"
}
outputTrojan() {
if [[ "$xtls" = "true" ]]; then
echo -e " ${BLUE}IP/域名(address): ${PLAIN} ${RED}${domain}${PLAIN}"
echo -e " ${BLUE}端口(port)：${PLAIN}${RED}${port}${PLAIN}"
echo -e " ${BLUE}密码(password)：${PLAIN}${RED}${password}${PLAIN}"
echo -e " ${BLUE}流控(flow)：${PLAIN}$RED$flow${PLAIN}"
echo -e " ${BLUE}加密(encryption)：${PLAIN} ${RED}none${PLAIN}"
echo -e " ${BLUE}传输协议(network)：${PLAIN} ${RED}${network}${PLAIN}"
echo -e " ${BLUE}底层安全传输(tls)：${PLAIN}${RED}XTLS${PLAIN}"
else
echo -e " ${BLUE}IP/域名(address): ${PLAIN} ${RED}${domain}${PLAIN}"
echo -e " ${BLUE}端口(port)：${PLAIN}${RED}${port}${PLAIN}"
echo -e " ${BLUE}密码(password)：${PLAIN}${RED}${password}${PLAIN}"
echo -e " ${BLUE}传输协议(network)：${PLAIN} ${RED}${network}${PLAIN}"
echo -e " ${BLUE}底层安全传输(tls)：${PLAIN}${RED}TLS${PLAIN}"
fi
}
outputVmessTLS() {
raw="{
\"v\":\"2\",
\"ps\":\"\",
\"add\":\"$IP\",
\"port\":\"${port}\",
\"id\":\"${uid}\",
\"aid\":\"$alterid\",
\"net\":\"${network}\",
\"type\":\"none\",
\"host\":\"${domain}\",
\"path\":\"\",
\"tls\":\"tls\"
}"
link=`echo -n ${raw} | base64 -w 0`
link="vmess://${link}"
echo -e " ${BLUE}IP(address): ${PLAIN} ${RED}${IP}${PLAIN}"
echo -e " ${BLUE}端口(port)：${PLAIN}${RED}${port}${PLAIN}"
echo -e " ${BLUE}id(uuid)：${PLAIN}${RED}${uid}${PLAIN}"
echo -e " ${BLUE}额外id(alterid)：${PLAIN} ${RED}${alterid}${PLAIN}"
echo -e " ${BLUE}加密方式(security)：${PLAIN} ${RED}none${PLAIN}"
echo -e " ${BLUE}传输协议(network)：${PLAIN} ${RED}${network}${PLAIN}"
echo -e " ${BLUE}伪装域名/主机名(host)/SNI/peer名称：${PLAIN}${RED}${domain}${PLAIN}"
echo -e " ${BLUE}底层安全传输(tls)：${PLAIN}${RED}TLS${PLAIN}"
echo
echo -e " ${BLUE}vmess链接: ${PLAIN}$RED$link$PLAIN"
}
outputVmessWS() {
raw="{
\"v\":\"2\",
\"ps\":\"\",
\"add\":\"$IP\",
\"port\":\"${port}\",
\"id\":\"${uid}\",
\"aid\":\"$alterid\",
\"net\":\"${network}\",
\"type\":\"none\",
\"host\":\"${domain}\",
\"path\":\"${wspath}\",
\"tls\":\"tls\"
}"
link=`echo -n ${raw} | base64 -w 0`
link="vmess://${link}"
echo -e " ${BLUE}IP(address): ${PLAIN} ${RED}${IP}${PLAIN}"
echo -e " ${BLUE}端口(port)：${PLAIN}${RED}${port}${PLAIN}"
echo -e " ${BLUE}id(uuid)：${PLAIN}${RED}${uid}${PLAIN}"
echo -e " ${BLUE}额外id(alterid)：${PLAIN} ${RED}${alterid}${PLAIN}"
echo -e " ${BLUE}加密方式(security)：${PLAIN} ${RED}none${PLAIN}"
echo -e " ${BLUE}传输协议(network)：${PLAIN} ${RED}${network}${PLAIN}"
echo -e " ${BLUE}伪装类型(type)：${PLAIN}${RED}none$PLAIN"
echo -e " ${BLUE}伪装域名/主机名(host)/SNI/peer名称：${PLAIN}${RED}${domain}${PLAIN}"
echo -e " ${BLUE}路径(path)：${PLAIN}${RED}${wspath}${PLAIN}"
echo -e " ${BLUE}底层安全传输(tls)：${PLAIN}${RED}TLS${PLAIN}"
echo
echo -e " ${BLUE}vmess链接:${PLAIN} $RED$link$PLAIN"
}
showInfo() {
res=`status`
if [[ $res -lt 2 ]]; then
colorEcho $RED " Xray未安装，请先安装！"
return
fi
echo ""
echo -n -e " ${BLUE}Xray运行状态：${PLAIN}"
statusText
echo -e " ${BLUE}Xray配置文件: ${PLAIN} ${RED}${CONFIG_FILE}${PLAIN}"
colorEcho $BLUE " Xray配置信息："
getConfigFileInfo
echo -e " ${BLUE}协议: ${PLAIN} ${RED}${protocol}${PLAIN}"
if [[ "$trojan" = "true" ]]; then
outputTrojan
return 0
fi
if [[ "$vless" = "false" ]]; then
if [[ "$kcp" = "true" ]]; then
outputVmessKCP
return 0
fi
if [[ "$tls" = "false" ]]; then
outputVmess
elif [[ "$ws" = "false" ]]; then
outputVmessTLS
else
outputVmessWS
fi
else
if [[ "$kcp" = "true" ]]; then
echo -e " ${BLUE}IP(address): ${PLAIN} ${RED}${IP}${PLAIN}"
echo -e " ${BLUE}端口(port)：${PLAIN}${RED}${port}${PLAIN}"
echo -e " ${BLUE}id(uuid)：${PLAIN}${RED}${uid}${PLAIN}"
echo -e " ${BLUE}加密(encryption)：${PLAIN} ${RED}none${PLAIN}"
echo -e " ${BLUE}传输协议(network)：${PLAIN} ${RED}${network}${PLAIN}"
echo -e " ${BLUE}伪装类型(type)：${PLAIN} ${RED}${type}${PLAIN}"
echo -e " ${BLUE}mkcp seed：${PLAIN} ${RED}${seed}${PLAIN}"
return 0
fi
if [[ "$xtls" = "true" ]]; then
echo -e " ${BLUE}IP(address): ${PLAIN} ${RED}${IP}${PLAIN}"
echo -e " ${BLUE}端口(port)：${PLAIN}${RED}${port}${PLAIN}"
echo -e " ${BLUE}id(uuid)：${PLAIN}${RED}${uid}${PLAIN}"
echo -e " ${BLUE}流控(flow)：${PLAIN}$RED$flow${PLAIN}"
echo -e " ${BLUE}加密(encryption)：${PLAIN} ${RED}none${PLAIN}"
echo -e " ${BLUE}传输协议(network)：${PLAIN} ${RED}${network}${PLAIN}"
echo -e " ${BLUE}伪装类型(type)：${PLAIN}${RED}none$PLAIN"
echo -e " ${BLUE}伪装域名/主机名(host)/SNI/peer名称：${PLAIN}${RED}${domain}${PLAIN}"
echo -e " ${BLUE}底层安全传输(tls)：${PLAIN}${RED}XTLS${PLAIN}"
elif [[ "$ws" = "false" ]]; then
echo -e " ${BLUE}IP(address): ${PLAIN}${RED}${IP}${PLAIN}"
echo -e " ${BLUE}端口(port)：${PLAIN}${RED}${port}${PLAIN}"
echo -e " ${BLUE}id(uuid)：${PLAIN}${RED}${uid}${PLAIN}"
echo -e " ${BLUE}流控(flow)：${PLAIN}$RED$flow${PLAIN}"
echo -e " ${BLUE}加密(encryption)：${PLAIN} ${RED}none${PLAIN}"
echo -e " ${BLUE}传输协议(network)：${PLAIN} ${RED}${network}${PLAIN}"
echo -e " ${BLUE}伪装类型(type)：${PLAIN}${RED}none$PLAIN"
echo -e " ${BLUE}伪装域名/主机名(host)/SNI/peer名称：${PLAIN}${RED}${domain}${PLAIN}"
echo -e " ${BLUE}底层安全传输(tls)：${PLAIN}${RED}TLS${PLAIN}"
else
echo -e " ${BLUE}IP(address): ${PLAIN} ${RED}${IP}${PLAIN}"
echo -e " ${BLUE}端口(port)：${PLAIN}${RED}${port}${PLAIN}"
echo -e " ${BLUE}id(uuid)：${PLAIN}${RED}${uid}${PLAIN}"
echo -e " ${BLUE}流控(flow)：${PLAIN}$RED$flow${PLAIN}"
echo -e " ${BLUE}加密(encryption)：${PLAIN} ${RED}none${PLAIN}"
echo -e " ${BLUE}传输协议(network)：${PLAIN} ${RED}${network}${PLAIN}"
echo -e " ${BLUE}伪装类型(type)：${PLAIN}${RED}none$PLAIN"
echo -e " ${BLUE}伪装域名/主机名(host)/SNI/peer名称：${PLAIN}${RED}${domain}${PLAIN}"
echo -e " ${BLUE}路径(path)：${PLAIN}${RED}${wspath}${PLAIN}"
echo -e " ${BLUE}底层安全传输(tls)：${PLAIN}${RED}TLS${PLAIN}"
fi
fi
}
showLog() {
res=`status`
if [[ $res -lt 2 ]]; then
colorEcho $RED " Xray未安装，请先安装！"
return
fi
journalctl -xen -u xray --no-pager
}
menu() {
clear
echo "#############################################################"
echo -e "# ${RED}Xray一键安装脚本${PLAIN} #"
echo -e "# ${GREEN}作者${PLAIN}: 网络跳越(hijk) #"
echo -e "# ${GREEN}网址${PLAIN}: https://hijk.art #"
echo -e "# ${GREEN}论坛${PLAIN}: https://hijk.club #"
echo -e "# ${GREEN}TG群${PLAIN}: https://t.me/hijkclub #"
echo -e "# ${GREEN}Youtube频道${PLAIN}: https://youtube.com/channel/UCYTB--VsObzepVJtc9yvUxQ #"
echo "#############################################################"
echo -e " ${GREEN}1.${PLAIN} 安装Xray-VMESS"
echo -e " ${GREEN}2.${PLAIN} 安装Xray-${BLUE}VMESS+mKCP${PLAIN}"
echo -e " ${GREEN}3.${PLAIN} 安装Xray-VMESS+TCP+TLS"
echo -e " ${GREEN}4.${PLAIN} 安装Xray-${BLUE}VMESS+WS+TLS${PLAIN}${RED}(推荐)${PLAIN}"
echo -e " ${GREEN}5.${PLAIN} 安装Xray-${BLUE}VLESS+mKCP${PLAIN}"
echo -e " ${GREEN}6.${PLAIN} 安装Xray-VLESS+TCP+TLS"
echo -e " ${GREEN}7.${PLAIN} 安装Xray-${BLUE}VLESS+WS+TLS${PLAIN}${RED}(可过cdn)${PLAIN}"
echo -e " ${GREEN}8.${PLAIN} 安装Xray-${BLUE}VLESS+TCP+XTLS${PLAIN}${RED}(推荐)${PLAIN}"
echo -e " ${GREEN}9.${PLAIN} 安装${BLUE}trojan${PLAIN}${RED}(推荐)${PLAIN}"
echo -e " ${GREEN}10.${PLAIN} 安装${BLUE}trojan+XTLS${PLAIN}${RED}(推荐)${PLAIN}"
echo " -------------"
echo -e " ${GREEN}11.${PLAIN} 更新Xray"
echo -e " ${GREEN}12. ${RED}卸载Xray${PLAIN}"
echo " -------------"
echo -e " ${GREEN}13.${PLAIN} 启动Xray"
echo -e " ${GREEN}14.${PLAIN} 重启Xray"
echo -e " ${GREEN}15.${PLAIN} 停止Xray"
echo " -------------"
echo -e " ${GREEN}16.${PLAIN} 查看Xray配置"
echo -e " ${GREEN}17.${PLAIN} 查看Xray日志"
echo " -------------"
echo -e " ${GREEN}0.${PLAIN} 退出"
echo -n " 当前状态："
statusText
echo
read -p " 请选择操作[0-17]：" answer
case $answer in
0)
exit 0
;;
1)
install
;;
2)
KCP="true"
install
;;
3)
TLS="true"
install
;;
4)
TLS="true"
WS="true"
install
;;
5)
VLESS="true"
KCP="true"
install
;;
6)
VLESS="true"
TLS="true"
install
;;
7)
VLESS="true"
TLS="true"
WS="true"
install
;;
8)
VLESS="true"
TLS="true"
XTLS="true"
install
;;
9)
TROJAN="true"
TLS="true"
install
;;
10)
TROJAN="true"
TLS="true"
XTLS="true"
install
;;
11)
update
;;
12)
uninstall
;;
13)
start
;;
14)
restart
;;
15)
stop
;;
16)
showInfo
;;
17)
showLog
;;
*)
colorEcho $RED " 请选择正确的操作！"
exit 1
;;
esac
}
checkSystem
action=$1
[[ -z $1 ]] && action=menu
case "$action" in
menu|update|uninstall|start|restart|stop|showInfo|showLog)
${action}
;;
*)
echo " 参数错误"
echo " 用法: `basename $0` [menu|update|uninstall|start|restart|stop|showInfo|showLog]"
;;
esac
什么 vpn pptp l2tp V2ray winXray 我都不敢提，自己默默用就算了